Contents
Russian Metallurgy (Metally)

Vol. 2007, No. 8

Simultaneous English language translation of the journal is available from Pleiades Publishing, Ltd.
Distributed worldwide by Springer. Russian Metallurgy (Metally) ISSN 0036-0295.

Effect of the Melting Conditions on the Ductility of Nickel–Chromium Superalloys

B. V. Oshchepkov, B. I. Leonovich, E. A. Trofimov, and T. A. Bendera p. 647  abstract

Electroslag Production of Cast Pipe Workpieces of a High-Boron 04Kh14T3R1F-Sh (ChS82-Sh) Steel

A. P. Gerasimchuk, F. A. Germelin, D. S. Zuev,
N. V. Kostyleva, and T. L. Baeva p. 651  abstract

Increasing the Quality of Rolls Intended for Cold-Rolling Mills

V. S. Paleev p. 656  abstract

Nitrogen as a Regulator of the Austenite Grain Size and Steel Quality

L. N. Belyanchikov p. 659  abstract

Improvement to the Vacuum Treatment of Steel

S. S. Emel’yanov, S. V. Sebyakin, A. V. Dobrodon,
I. A. Roldugin, and E. N. Tyulenev p. 663  abstract

Fracture of the Coatings of Mold Tubes in High-Speed Section Continuous Casters

I. V. Leirikh, A. N. Smirnov, E. Yu. Zhiboedov, and E. N. Lyubimenko p. 668  abstract

Effect of Argon Injection on the Rim Formation in a Section Continuous Casting

E. V. Shtepan, G. A. Red’ko, V. E. Ukhin,
A. V. Naumenko, and E. Yu. Zhiboedov p. 672  abstract

Prerequisites for the Organization of the Production
of Small-Section Continuous Castings

A. L. Liberman p. 676  abstract

Thermodynamic Calculations for Solid Alloys Produced under Equilibrium,
Quasi-Equilibrium, and Nonequilibrium Solidification Conditions

L. N. Belyanchikov p. 682  abstract

Densities and Molar Volumes of Refined Sodium Oxide–Containing Slag Melts

I. A. Magidson, A. V. Basov, N. A. Smirnov, and M. V. Ezova p. 688  abstract

Oxygen Solubility in Binary Metallic Melts

V. Ya. Dashevskii and K. V. Grigorovich p. 694  abstract

Application of Celox Oxygen Probes for Out-of-Furnace Steel Processing

I. V. Zinkovskii, A. L. Ignatov, V. V. Kromm, and A. A. Ivanov p. 702  abstract

Power and Engineering Possibilities of Next-Generation DC Arc Furnaces

V. S. Malinovskii p. 705  abstract

Decreasing the Calcium Aluminate Content in Grade 20K Steel
under the Conditions of the Volga Tube Works

A. A. Pecheritsa, I. V. Neklyudov, D. G. Elanskii, and A. A. Klachkov p. 711  abstract

Nitriding of a Corrosion-Resistant Steel in a VOD Setup

V. V. Moiseev, A. V. Sushnikov, M. I. Makhnev, S. A. Annenkov,
G. I. Morozov, V. V. Rozhentsev, and S. Yu. Azhgikhin p. 715  abstract

Light and Shade of Developing Russian Electrometallurgy

D. G. Elanskii p. 717  abstract

Development and Introduction of an Integrated Process for the Manufacture
of Metal Products from Corrosion-Resistant Steels

V. V. Moiseev, A. V. Sushnikov, M. I. Makhnev, S. Yu. Azhgikhin,
S. A. Annenkov, G. I. Morozov, and V. V. Rozhentsev p. 724  abstract

Possibilities of Reducing the Chromium and Manganese Contents
in a Nitrogen-Bearing Austenitic Steel

E. Yu. Kolpishon, M. V. Ivanova, and E. V. Shitov p. 728  abstract

Experience with the Use of a Metallurgical Slime Processing Pilot Complex

M. V. Ushakova and V. I. Rostovskii p. 733  abstract

System for the Optimum Control of the Electrical Conditions of an Arc Furnace Powered
through a Controlled Reactor

O. Yu. Lozinskii and Ya. S. Paranchuk p. 737  abstract

Induction Installations for Heating Long Cylindrical Billets before Metal Forming

V. B. Demidovich, B. M. Nikitin, and V. A. Olenin p. 744  abstract

Steelmaking Using Remelting Processes in Large-Tonnage Electric Furnaces

I. N. Kokarev, V. A. Mironov, and A. A. Gusev p. 749  abstract

Secondary Metals and Electric Melting of Steel

A. E. Semin, A. G. Chizhikov, G. I. Kotel’nikov, and A. S. Cherepnev p. 756  abstract

Author Index to Volume 2007 p. 762

Pleiades Publishing home page | journal home page | top

If you have any problems with this server, contact webmaster.