Contents
Russian Metallurgy (Metally)

Vol. 2009, No. 7

A simultaneous English language translation of this journal is available from Pleiades Publishing, Ltd.
Distributed worldwide by Springer. Russian Metallurgy (Metally) ISSN 0036-0295.

Manufacture of Ferrous and Nonferrous Metals

Acid Electric Melting of Steel in the Blank Production Complex of Machine Building

V. M. Soifer p. 555  abstract

High-Reliability Unit for Complex Treatment of Steel

I. M. Bershitskii, A. A. Nikulin, N. A. Savalyk, and S. A. Tarakanov p. 560  abstract

Controlling the Composition of Nonmetallic Inclusions in a Low-Alloy Manganese Steel

A. V. Dub, A. N. Romashkin, Yu. V. Gordeev, G. G. Shvetsov, and I. V. Zinkovskii p. 564  abstract

Mathematical Simulation of Nonstationary Mixing of Steel in a Ladle–Furnace Unit

M. M. Erofeev and E. B. Agapitov p. 571  abstract

Controlling the Dephosphorization of Steel during Melting a Semiproduct in an ASF

A. A. Chichko, V. A. Matochkin, V. F. Sobolev, and A. N. Chichko p. 576  abstract

Analysis of Various Versions of the Deoxidation of Rail Steel at OAO NTMK

A. K. Garber, A. M. Arsenkin, K. V. Grigorovich, S. S. Shibaev,
A. V. Kushnarev, and Yu. P. Petrenko p. 581  abstract

Study of the Heat and Mass Exchange in the Bath of a Ladle–Furnace Unit
to Increase the Efficiency of Its Operation

V. P. Piptyuk, V. F. Polyakov, S. E. Samokhvalov, I. A. Pavlyuchenkov, S. V. Grekov,
A. G. Chicherin, R. R. Gnyp, and S. N. Pavlov p. 587  abstract

Control and Management of the Out-of-Furnace Treatment of Metal Using Ladle Vibrations

Yu. V. Kostetskii, I. V. Kvasov, I. V. Degtyarenko, and D. P. Kukui p. 595  abstract

Physicochemical Grounds for the Substitution of Nitrogen for Argon
during Out-of-Furnace Treatment of High-Carbon Steel

I. V. Golub, A. P. Stovpchenko, L. V. Kamkina, and Yu. S. Proydak p. 598  abstract

New Steel Finishing Technologies in the Electric-Furnace Shop of the Kramatorck
Energomashspetsstal’ Engineering Works

V. M. Safonov, A. N. Smirnov, A. Yu. Tsuprun, A. G. Kovalev, and V. N. Tiunov p. 603  abstract

Refining of the Forging Ingot Metal from Nonferrous Metals Using High-Activity Elements

V. G. Zinchenko, N. V. Mal’kov, M. O. Peshkov, and V. E. Roshin p. 608  abstract

Material and Heat Balance in DSP-180 at OAO MMK

V. A. Bigeev, A. E. Malofeev, A. V. Panteleev, Yu. A. Ivin, and A. Kh. Valiakhmetov p. 610  abstract

Continuous Casting of Steel

Effect of Hydrogen on the Frequency of Breaks in a Metal during Continuous Casting of Steel

A. N. Smirnov, M. V. Epishev, V. V. Kislitsa, and S. A. Nagornyi p. 612  abstract

Effect of the Casting Rate of a Billet on the Resistance of the Mold Shell
in a High-Capacity Section Continuous Caster

A. B. Biryukov, V. V. Kravtsov, and E. S. Lolenko p.615 abstract

Electrothermal Metallurgical Equipment

Bottom Electrodes of DC Electric Arc Furnaces

M. Ya. Kaplun p. 618  abstract

Decrease in the Consumption of Graphitized Electrodes in Arc Furnaces during Their Forced Cooling

I. M. Yachikov and V. M. Kolokol’tsev p. 622  abstract

Manufacture of Ferroalloys

Making Silicostrontium by a Carbothermic Method

Yu. V. Grigor’ev, I. V. Ryabchikov, and V. E. Roshin p. 625  abstract

Transformations in Chromium Ores during Oxidizing Heating

K. I. Nevraeva, I. Yu. Pashkeev, and G. G. Mikhailov p. 628  abstract

Theory of Metallurgical Processes

Surface Tension of CaO–Al₂O₃–SiO₂ Oxide Melts

I. A. Magidson, A. V. Basov, and N. A. Smirnov p. 631  abstract

Energy Parameters in the Model of Regular Ionic Solutions as Applied to Metallurgical Slags

S. N. Paderin and A. V. Alpatov p. 636  abstract

Thermodynamic Analysis of the Formation of Nonmetallic Inclusions in
40KhGM Steel with Various Sulfur Contents

N. M. Tanklevskaya, M. S. Bobykina, and G. G. Mikhailov p. 642  abstract

Charge Materials

Synticom—Original Metallic Charge for the Electric Furnace Steelmaking of High-Quality Steels

G. A. Dorofeev, E. Kh. Shakhpazov, S. Z. Afonin, and L. N. Shevelev p. 644  abstract

Quality of Metal Products

Modern Trends in Increasing the Quality of the Steels Intended for Cutting
and Metal-Working Tools: II. Spray Forming of Billets

L. N. Belyanchikov p. 649  abstract

Production of Sheet Rolled Products Made of a Nitrogen-Bearing High-Strength
Corrosion-Resistant Steel Using Electroslag Remelting

E. R. Gutman, V. A. Durynin, G. Yu. Kalinin, O. A. Khar’kov, and V. V. Tsukanov p. 655  abstract

Effect of the Metallurgical Quality Characteristics of High-Strength Pipe Steel
on Its Stress Corrosion Cracking Resistance

V. P. Gorbatenko, V. M. Dorokhin, and V. V. Burkhovetskii p. 659  abstract

Resource Saving

Wasteless Recovery of the Byproducts of Electric Furnace Steelmaking

Yu. A. Gudim and A. A. Golubev p. 664  abstract

GINTsVETMET and Ecological Safety of Nonferrous Metallurgy

A. V. Tarasov and V. M. Paretskii p.667 abstract

Pleiades Publishing home page | journal home page | top

If you have any problems with this server, contact webmaster.