Contents

Russian Metallurgy (Metally)

---

Vol. 2020, No. 7, 2020

---

Vanadium Recovery from the Waste Sludge of the Lime–Sulfuric Acid Processing of Converter Slag

G. B. Sadykhov, K. V. Goncharov, D. Yu. Kashenkov and T. V. Olyunina p. 709  abstract

Substantiation of the Possibility of Hydrometallurgical Processing of a Copper–Nickel Converter Matte

A. O. Bol’shikh, O. I. Tsybin, M. A. Bol’shikh, O. G. Kuznetsova and A. M. Levin p. 718  abstract

Structure, Phase Composition, and Mechanical Properties of a Commercial ML19 Magnesium Alloy in the As-Cast and Heat-Treated States

E. F. Volkova, M. V. Akinina, I. V. Mostyaev and N. V. Trofimov p. 723  abstract

Microheterogeneity and Solidification Conditions of an Mg₆₁Cu₂₈Cd₁₁ Alloy

O. A. Chikova, A. R. Barashev, G. A. Tkachuk and V. V. V’yukhin p. 731  abstract

Development of an Approach to Determining the Representative Volume Element of the Al/SiC Metal Matrix Composite Material Fabricated by Squeeze Casting

D. A. Konovalov, I. A. Veretennikova, T. M. Bykova and N. S. Michurov p. 738  abstract

Use of Electroplating for Increasing the Efficiency and Quality of Impregnation of a Porous Graphitized Carbon Material with Copper Alloys

V. A. Gulevskii, V. I. Antipov, L. V. Vinogradov, N. Yu. Miroshkin, V. V. Gulevskii, A. G. Kolmakov, Yu. E. Mukhina and E. E. Baranov p. 746  abstract

Effect of the Temperature of Pressure Welding of a Wrought EP975 Nickel Alloy and a Single-Crystal Intermetallic VKNA-25 Alloy on the Structure and Properties of the Welded Joints

A. A. Drozdov, K. B. Povarova, V. A. Valitov, E. V. Galieva, E. G. Arginbaeva, O. A. Bazyleva, M. A. Bulakhtina and A. N. Raevskikh p. 752  abstract

Effect of Structure on the Critical Stresses and Strains in Titanium Nickelide-Based Alloys

M. Yu. Kollerov, D. E. Gusev, M. B. Afonina and R. E. Vinogradov p. 760  abstract

Corrosion–Fatigue Fracture of the Ultrafine-Grained PT-7M Titanium Alloy Fabricated by Rotary Forging

V. N. Chuvil’deev, N. N. Berendeev, A. A. Murashov, V. I. Kopylov, A. V. Nokhrin, M. Yu. Gryaznov, K. V. Likhnitskii, N. Yu. Tabachkova, E. A. Galaeva, D. N. Kotkov, A. M. Bakhmet’ev, T. V. Tryaev and M. M. Myshlyaev p. 767  abstract

Effect of High-Pressure Nitrogen Quenching on the Structure and Properties of a 36NKhTYu8M Precision Spring Alloy

S. Yu. Shevchenko, A. E. Smirnov, D. P. Sleptsova and Vai Yan Min Khtet p. 779  abstract

Structure and Functional Properties of the Coatings Deposited by Sputtering of Targets Based on Chromium and Detonation Nanodiamonds

M. M. Khrushchov, E. A. Marchenko, I. S. Levin, V. M. Avdyukhina, M. D. Reilyanu, N. V. Shevchenko and E. A. Obraztsova p. 786  abstract

Effect of the Structural State Formed during Laser Melting Deposition on the Parameters of a Nitrided Layer on 25Kh13N2 Martensitic Steel

E. V. Tsvetkova, K. O. Bazaleeva, A. E. Smirnov, I. S. Chekin and A. S. Zhidkov p. 792  abstract

Use of a Model for the Final Stage of Transient Swelling to Predict the Radiation-Induced Porosity in Kh18N9 Steel during Operation in the BN-600 Reactor Internals

A. V. Kozlov, I. A. Portnykh and V. L. Panchenko p. 799  abstract

Use of Alternating Elastoplastic Deformation for Hardening Metallic Materials

A. E. Shelest, V. S. Yusupov, V. M. Matyunin, A. Yu. Marchenkov, M. M. Perkas and E. N. Sheftel’ p. 806  abstract

Indentation Determination of the Fracture Toughness of Steels at Various Temperatures

A. A. Baron p. 813  abstract

---