Contents
Russian Metallurgy (Metally)

Vol. 2012, No. 6

A simultaneous English language translation of this journal is available from Pleiades Publishing, Ltd.
Distributed worldwide by Springer. Russian Metallurgy (Metally) ISSN 0036-0295.

Manufacture of Ferrous and Nonferrous Metals

New Possibilities of Consteel Furnaces

Yu. N. Tuluevskii, I. Yu. Zinurov, and V. G. Shver p. 449  abstract

Concept of Reconstruction of Metallurgical Minimills

A. E. Lazutkin, A. G. Chizhikov, and A. E. Semin p. 454  abstract

Rational Process of Production of Corrosion-Resistant Ferritic Steel
with Nanocluster Oxide Hardening for Atomic Power Engineering

L. N. Belyanchikov p. 461  abstract

Special Electrometallurgy

Electric Melting Methods for Developing Special Alloys for Radio Electronics

N. P. Esaulov p. 468  abstract

Effect of TiCN–Ti Modifiers on the Chemical Composition of Nickel Alloys

S. N. Zherebtsov and A. B. Korostelev p. 471  abstract

Analytical Determination of the Vacuum Arc Remelting Parameters

A. V. Filimonov p. 475  abstract

Laws of the DC Arc in an Inert Gas during Melting in Furnaces with a Tungsten Electrode

L. N. Belyanchikov p. 478  abstract

Electrothermal Equipment

Possibility of Combining Electroslag Remelting and Continuous Casting
for the Production of Hollow Ingots

L. B. Medovar, A. P. Stovpchenko, B. B. Fedorovskii, and G. V. Noshchenko p. 484  abstract

Analysis of the Harmonic Composition of a Phase Current Curve for Estimating
the Power Distribution in the Crucible of an Electric Ore Smelting Furnace

V. P. Rubtsov and V. A. Elizarov p. 488  abstract

AC Arc Characteristics

Yu. M. Mironov p. 496  abstract

Processing of Low-Silicon Steel Using a Calcium-Containing Wire to Improve
the Technological Casting Parameters of a Continuous Caster

A. V. Pashchenko, T. V. Goryainova, and V. V. Akulov p. 501  abstract

Effective Technical Solutions for the Refining of Steel from Nonmetallic Inclusions
in Continuous Caster Tundishes

V. L. Naidek, A. V. Nogovitsin, E. F. Diyuk, B. S. Gonchar, O. B. Isaev, and V. V. Kislitsa p. 505  abstract

Continuous Casting of Billets Made of a Chromium–Nickel Titanium-Containing
Corrosion-Resistant Steel

S. V. Kuberskii, V. S. Essel’bakh, and A. M. Novokhatskii p.509  abstract

Radioactive Isotope Study of the Formation of a Continuous Casting

A. M. Skrebtsov and D. A. Dyudkin p. 514  abstract

Modern Processes of Production of Thin Sheets and Strips by Continuous Casting

A. N. Smirnov p. 518  abstract

Theory of Metallurgical Processes

“Chemical Vacuum”—The Concept to Be Refined and Revised

B. V. Linchevskii and V. Ya. Dashevskii p. 523  abstract

Quality of Metal Products

Influence of Heat Treatment on the Structure and Hardness of 9% Chromium Steel

P. A. Kozlov, V. A. Dub, V. N. Skorobogatykh, and I. A. Shchenkova p. 527  abstract

Increasing the Quality of Forged Ingots via Thermal Shielding of Ingot Molds

V. G. Zinchenko, M. O. Peshkov, and V. E. Roshchin p. 531  abstract

Nature and Diagnostics of Nonmetallic Inclusions in Steels

V. V. Lunev and V. P. Pirozhkova p. 535  abstract

Study and Analysis of the Structural Constituents of Billets Hardened by Fine-Grained Particles
and Formed by Centrifugal Casting

I. V. Chumanov, N. T. Kareva, V. I. Chumanov, and A. N. Anikeev p. 539  abstract

Resource Saving

Increasing the Arc Efficiency by the Removal of Arc Electromagnetic Blowing
in Electric Arc Furnaces: I. Effect of Electromagnetic Blowing and the Slag Height
on the Arc Efficiency in an Electric Arc Furnace

A. N. Makarov, A. Yu. Sokolov, and Yu. A. Lugovoi p. 542  abstract

Electroslag Remelting of the Metal Wastes of Nickel Alloys

S. N. Zherebtsov and A. B. Korostelev p. 548  abstract

Increase in the Efficiency of Induction Heating during Heat Treatment of Wires

I. I. Barankova, V. B. Demidovich, and P. A. Sit’ko p.552  abstract

Pleiades Publishing home page | journal home page | top

If you have any problems with this server, contact webmaster.