Contents
Russian Metallurgy (Metally)

Vol. 2010, No. 6

A simultaneous English language translation of this journal is available from Pleiades Publishing, Ltd.
Distributed worldwide by Springer. Russian Metallurgy (Metally) ISSN 0036-0295.

Manufacture of Ferrous and Nonferrous Metals

Intensification of Out-of-Furnace Treatment of Steel at an Enhanced Electric Arc
Furnace Capacity

A. V. Kodak, N. I. Popik, V. V. Syrovatskii, and A. Ya. Mints p. 465  abstract

Distribution of Metal Particles in a Slag during Argon Blowing of a Melt in a Ladle

A. N. Smirnov, V. M. Safonov, D. V. Proskurenko, and K. E. Pismarev p. 469  abstract

Effect of Some Technical and Technological Parameters on the Efficiency
of Ladle Treatment of Steel

V. M. Safonov, A. N. Smirnov, A. Yu. Tsuprun, and E. V. Oshovskaya p. 475  abstract

Energy-Technical Regime of an ASF-150 Furnace for Steelmaking Using Hot-Briquetted
Iron in a Charge

E. S. Timofeev, A. S. Timofeeva, and V. V. Fedina p. 479  abstract

Application of an Alternative Current in the Processing of Cobalt-Containing Nickel-Based Alloys

O. G. Kuznetsova, V. A. Bryukvin, P. V. Ermuratskii, and V. M. Paretskii p. 482  abstract

Nonmetallic Inclusions in a Chromium Steel Intended for the Power Engineering Industry

E. Yu. Kolpishon, A. N. Mal’ginov, A. N. Romashkin, V. A. Durynin, S. Yu. Afanas’ev,
E. V. Shitov, L. T. Afanas’eva, and Yu. M. Batov p. 489  abstract

Increasing the Resistance of an ASF Lining with an MgO–CaO Flux

L. M. Aksel’rod, M. B. Orzhekh, and I. V. Kushnerev p. 494  abstract

Special Electrometallurgy

Increasing the Efficiency of the Electroslag Process and Improving the Metal Quality
by Rotating a Consumable Electrode: Part 1

V. I. Chumanov and I. V. Chumanov p. 499  abstract

Possibility of the Production of Consumable Electrodes for Electroslag Remelting
Using Prereduced Pellets: Part 1

E. A. Vorona and V. I. Chumanov p. 505  abstract

Plasma Plants for the Melting and Reduction of Metals

V. S. Cherednichenko, M. G. Kuz’min, and A. S. An’shakov p. 510  abstract

Electrothermal Equipment

Modernization of the Control System and the Electrical Equipment
of DSV Vacuum Arc Furnaces

A. A. Dednev, M. A. Kisselman, S. M. Nekhamin, V. I. Kalinin, and Yu. N. Koshelev p. 517  abstract

Thermal Operation of Arc Foundry Furnaces

Yu. M. Mironov and V. G. Petrov p. 522  abstract

Estimation of the Energy Release in the Working Zone of Modern Electrometallurgical Units

I. A. Bezrukov and R. A. Bikeev p.526  abstract

Simulation of the Mass and Heat Transfer in a Three-Electrode Round Impoverishment Furnace

D. V. Rumyantsev, V. A. Talalov, V. V. Stepanov, and M. R. Rusakov p. 532  abstract

Casting and Solidification of Steel

Improvement of the Casting Systems of Continuous Caster Tundishes

S. P. Eron’ko, A. Yu. Tsuprun, K. V. Duboiskii, D. A. Yakovlev, and S. A. Bedarev p. 538  abstract

Choice of a Rational Scheme for Casting of a Forging Ingot for Producing Hollow Forgings

M. V. Kolodkin, S. I. Zhul’ev^†, V. S. Dub, A. N. Romashkin, and A. N. Mal’ginov p. 544  abstract

Theory of Metallurgical Processes

Thermodynamic Analysis of the Dominant Phase Equilibria in M(Si, Cr, Al)–O–C Systems

M. M. Gasik and M. I. Gasik p. 548  abstract

Thermodynamic Models of Liquid Multicomponent Metallic Solutions

A. V. Alpatov and S. N. Paderin p. 557  abstract

Thermodynamics of Titanium-Based Melts: I. Thermodynamics of the Dissolution
of Elements in Liquid Titanium

L. N. Belyanchikov p. 565  abstract

Thermodynamic Analysis of an External Action on the Kinetics of Bulk Solidification of Metals

Yu. A. Balakin and M. I. Gladkov p. 568  abstract

Resource Saving

Theoretical and Experimental Studies of the Composition and Reducibility
of the Dust from Arc Steel-Melting Furnaces

A. P. Stovpchenko, L. V. Kamkina, Yu. S. Proidak, I. V. Derevyanchenko,
O. L. Kucherenko, and M. Yu. Bondarenko p.572  abstract

Pleiades Publishing home page | journal home page | top

If you have any problems with this server, contact webmaster.