Contents

Russian Metallurgy (Metally)

---

Vol. 2026, No. 4, 2026

---

Viscosity and Density Behaviors of Ga–Ho Melt at High Temperatures

A. I. Rusanova, L. D. Son, B. A. Rusanov, V. A. Bykov, and K. Yu. Shunyaev p. 545  abstract

Fabrication and Characterization of AM60 Magnesium Alloy Matrix Composite Reinforced with Mg–Al–Ni–Cr–Fe High-Entropy Alloy

G Manikandaraja, Sujith Bobba, Senthil Maharaj Kennedy PSR, and K Aruna Prabha p. 554  abstract

Effect of the Oxide Scale Structure on the Pickling Efficiency of 45# Steel

Borui Zhang, Haoran Jiang, Zhiqiang Yang, Xin Ni, Xusheng Lin, Xiaojiang Liu, and Tao Jia p. 565  abstract

GTN-Based Formability Study of St 12/Al 3105 Two-Layer Sheets in Square Deep Drawing

N. Givianpour, H. Deilami Azodi, S. Yousefzadeh, and S. Mazdak p. 575  abstract

Investigation on Microhardness and Microstructure Properties of Titanium Alloy/ WC–Ni–Cr Coating with Laser Cladding Approach

Murahari Kolli and Kosaraju Satyanarayana p. 585  abstract

Regulatory Effects of Mo Addition on Microstructure and Wear Resistance of Plasma-Clad CoCrCuFeNi High-Entropy Alloy Coatings

Li Xiaojing, Yang Qingyuan, and Yu Dongman p. 594  abstract

Fabrication and Properties of TiC Steel-Bonded Cemented Carbide Using TiC–Ni Composite Powders Synthesized by SHS

SongChol Ri, YongHyok Song, CholSong Pang, CholHyok Kim, JongHyok Rim, KyongRyong Kim, JinSong Ri, SongRyong Pak, and CholBong Yun p. 606  abstract

Use of Steam to Improve the Natural Gas Combustion Conditions in a Blast Furnace Tuyere

E. A. Volkov, M. K. Mikhailova, I. A. Levitskii, A. G. Radyuk, M. M. Skripalenko, A. L. Terebov, and A. E. Titlyanov p. 617  abstract

Determination of Primary Stretching Limit of Slanted-Floor Box Products

Tok Chol Yu, Jin Song Choi, Kyong Ho Sim, Chon Il Son, and Il Kyong Kang p. 624  abstract

Determination of the Conditions for the Electrochemical Removal of Phosphate Ions from Washing Solutions Obtained during the Processing of Alunite from the Zaglik Deposit

A. A. Heydarov, P. G. Babaeva, D. T. Mehmet, G. I. Alyshanly, and S. T. Jafarova p. 637  abstract

Prediction of Structural Properties and Hydrogen Capacity of the Pd₃Mn–nH Intermetallic Compound

Yu. A. Abzaev, S. V. Melentyev, A. A. Klopotov, M. A. Syrtanov, and Yu. I. Tyurin p. 646  abstract

Mathematical Description of the Deformation Zone for Rolling in Simple-Shaped Grooves

A. A. Osipov, N. V. Semenova, M. V. Smirnov, and L. V. Solov’ova-Gogoleva p. 652  abstract

Hardening Characteristics of Magnetite–Anthracite–Calcium Hydroxide Composite Pellets via Carbonation

MyongJae Kim, JongChol Ri, and JongHyok Kim p. 658  abstract

Thermo-Physical Properties of Borophosphate Glasses with LnF₃ Additives (Ln = La, Ce, Nd)

M. I. Vlasov, V. A. Bykov, T. V. Kulikova, D. A. Kovalenko, D. A. Yagodin, E. D. Vedernikova, M. D. Kisel, D. Yu. Suntsov, and A. I. Tuchkova p. 668  abstract

Mechanical Testing and Microstructural Characterization of Roll-Formed Profiled Tubes from Circular Pipes

Meng-long Xing, Yang-chao Liu, Hong-chao Ji, Ji-yan Liu, and Feng-shan Du p. 676  abstract

Material Modeling Technique for High Energy Density Lithium-Transition Metal Hybrid Batteries: A DFT Outlook

Fatemeh Mollaamin and Majid Monajjemi p. 685  abstract

---