Vol. 2020, No. 4, 2020

Russian Metallurgy (Metally)

Physical Foundations of Strength and Plasticity

Hall–Petch Relation and the Localized Plasticity Parameters

L. B. Zuev and S. A. Barannikova p. 265 abstract

Molecular Dynamics Simulation of the Edge Dislocation Glide in Nickel and Silver in the Presence of Interstitial Light Element Atoms

G. M. Poletaev, I. V. Zorya, M. D. Starostenkov, Yu. V. Bebikhov and R. Yu. Rakitin p. 271 abstract

Contribution of Porous Grain Boundaries to the High-Temperature Background of Internal Friction

V. G. Kul’kov and A. A. Syshchikov p. 277 abstract

Deformation and Fracture Mechanics

Model for the Effect of the Phase Mechanism of Deformation on the Structural Mechanism in Shape Memory Alloys

A. A. Movchan p. 282 abstract

New Method for Studying the Strength of Brittle Bodies with Cracks

V. V. Vasil’ev and S. A. Lur’e p. 291 abstract

Buckling of a Rod with a Circular Cross Section Induced by a Direct Thermoelastic Martensitic Transformation

A. A. Movchan, S. A. Kazarina and A. L. Sil’chenko p. 298 abstract

Creep of Tubes under Internal Pressure

E. E. Vorob’ev, M. M. Peregud, V. A. Markelov and M. A. Shtremel’ p. 305 abstract

Structure and Properties of the Deformed State

Influence of the Deformation Parameters on the Morphology of the Strengthening O Phase and the Mechanical Properties of an Intermetallic VIT5 Titanium Alloy

A. V. Novak, N. A. Nochovnaya and E. B. Alekseev p. 318 abstract

Deformation Behavior of a VT18U Titanium Alloy in the Oxidized State

M. S. Kalienko, M. O. Leder, A. V. Volkov, A. V. Zhelnina and P. E. Panfilov p. 325 abstract

Formation of a Microcrystalline Structure in a VT5-1 Alloy during Uniaxial Compression at 800 and 900°C

N. V. Berdin, S. Ya. Betsofen, A. M. Smyslov and I. A. Grushin p. 330 abstract

Physical Modeling of the Evolution of the Microstructure of an Ni–Cr–Co–Nb–Ta–Mo High-Temperature Alloy during Hot Plastic Deformation

A. I. Rudskoi, G. E. Kodzhaspirov and A. V. Batasov p. 340 abstract

Two-Way Shape Memory Effect in Rapidly-Quenched High-Copper TiNiCu Alloys Deformed in the Martensitic State

A. V. Shelyakov, N. N. Sitnikov, K. A. Borodako and O. N. Sevryukov p. 345 abstract

Study of the Acoustic Emission and Calorimetric Properties of Titanium Nickelide after Barocryodeformation

P. A. Khaimovich, V. A. Andreev, E. V. Chernyaeva, A. E. Volkov, N. A. Shul’gin and Yu. N. V’yunenko p. 351 abstract

Mechanisms of Fracture of the Trabecular Bone Tissue of Periarticular Localization during a Depressed Fracture

D. Zaytsev, M. V. Gilev and M. Yu. Izmodenova p. 357 abstract

Advanced Materials and Technologies

Climatic Aging of Aviation Polymer Composite Materials: I. Influence of Significant Factors

E. N. Kablov and V. O. Startsev p. 364 abstract

Strength of Aluminum Alloys for Bridge Building

A. V. Korgin, P. D. Odesskii, V. A. Ermakov, L. Z. Zeid Kelani, V. A. Romanets and E. A. Koroleva p. 373 abstract

New High-Hardness Low-Alloy Wear-Resistant Ledeburitic Steel and the Prospects of Its Application at Negative Temperatures

V. I. Antipov, L. V. Vinogradov, A. G. Kolmakov, Yu. E. Mukhina and I. O. Bannykh p. 383 abstract

Thermoelectric and Mechanical Properties of Polycrystalline Yttrium-Containing GeTe Alloys

M. A. Kretova, E. S. Avilov and M. A. Korzhuev p. 387 abstract

High-Temperature Creep of Nb–Si In Situ Composites

I. L. Svetlov, M. I. Karpov, T. S. Stroganova, D. V. Zaitsev and Yu. V. Artemenko p. 396 abstract

Effect of Electron-Beam Treatment on the Structure of Commercial-Purity Titanium Subjected to Fatigue Failure

S. V. Konovalov, I. A. Komissarova, A. M. Gleser, Yu. F. Ivanov, V. E. Gromov and X. Chen p. 401 abstract

Effect of the Tempering Temperature on the Structure and the Mechanical Behavior of VNS9-Sh TRIP Steel with a High Martensite Content

V. F. Terent’ev, E. N. Blinova, T. G. Seval’neva, A. A. Ashmarin, D. D. Titov, V. M. Blinov and M. A. Kaplan p. 408 abstract

Mechanical Properties of VNS9-Sh TRIP Steel at Various Test Temperatures

V. F. Terent’ev, V. V. Stolyarov, A. V. Frolova and V. P. Sirotinkin p. 416 abstract

Applied Problems of Strength and Plasticity

Effect of Heat Treatment on the Structure and the Mechanical Properties of a Low-Alloy 10Kh3A Steel with an Overequilibrium Nitrogen Content

V. M. Blinov, M. V. Kostina, E. I. Lukin, E. V. Blinov, L. G. Rigina and S. O. Muradyan p. 422 abstract

Structural State and Mechanical Behavior of Fe–Cr–Ni Maraging Steels

V. F. Terent’ev, M. V. Gerov, E. Yu. Vladislavskaya, D. V. Prosvirnin, T. G. Seval’neva, G. S. Seval’nev, O. V. Antonova and A. A. Ashmarin p. 426 abstract

Long-Term Strength of 22Kh2G2AYu Reinforcing-Bar Steel during Corrosion Cracking Tests in a Boiling Nitrate Solution

N. N. Sergeev, S. N. Kutepov, A. N. Sergeev, A. G. Kolmakov, V. V. Izvol’skii and A. E. Gvozdev p. 434 abstract

Effect of the Composition of a Polyisocyanate–Polyester–Foaming Agent Mixture on the Properties of Polyurethane Foams

M. S. Arzhakov, P. P. Yakovlev and A. I. Lopatkin p. 441 abstract

Structure and Mechanical Properties of Die Steels after Quenching and Tempering

A. A. Krugljakow p. 445 abstract

Effect of the Segregation of Embrittling Impurities on the Local Strength of Grain Boundaries in a Martensitic Steel

G. A. Filippov, V. M. Mishin and V. V. Mishin p. 449 abstract

Fracture Toughness of Ferritic Corrosion-Resistant Steel Subjected to High-Temperature Nitriding

S. O. Rogachev, V. A. Belov, S. A. Nikulin, V. M. Khatkevich and A. V. Molyarov p. 454 abstract

Effect of Hydrogen Corrosion on the Brittle Fracture Resistance of an Oil Line Pipe 530 mm in Diameter Made of 12GSB Ferritic–Pearlitic Steel

V. M. Goritskii, G. R. Shneiderov and O. V. Goritskii p. 461 abstract

Diagnostics and Mechanical Test Techniques

On the Possibility of Predicting the Fatigue Life of Structural Elements Made of Aviation Composite Materials and Alloys

G. F. Rudzei and A. A. Kalyuta p. 470 abstract

Determination of the Fatigue Crack Growth Rate and Time in Rails Using Fatigue Macrolines

E. A. Shur, A. I. Borts, L. V. Bazanova, O. O. Scherbakova and I. V. Shkalei p. 477 abstract

Residual Strength of Cyclically Deformed Corrosion-Resistant Steel

L. R. Botvina, M. R. Tyutin, T. B. Petersen, D. V. Prosvirnin, A. E. Morozov and E. I. Kolokolov p. 483 abstract

Determination of the Mechanical Properties of the Materials Produced by Electric Pulse Powder Consolidation

E. G. Grigor’ev, V. Yu. Gol’tsev, N. A. Gribov, A. V. Osintsev, A. S. Plotnikov and K. L. Smirnov p. 493 abstract

Fatigue Crack Growth Kinetics in a 2024-T3 Aluminum Alloy during Alternating Cyclic Loading

A. N. Savkin, R. Sunder, A. A. Sedov and K. A. Badikov p. 500 abstract