Vol. 2019, No. 4, 2019

Russian Metallurgy (Metally)

Physical Foundations of Strength and Plasticity

Plastic Flow Localization and Strain Hardening of Metals

L. B. Zuev, A. G. Lunev, S. A. Barannikova and O. S. Staskevich p. 273 abstract

Strain Accumulated during Equal-Channel Angular Pressing and Its Components

F. Z. Utyashev, R. Z. Valiev, G. I. Raab and A. K. Galimov p. 281 abstract

Mechanism of Formation of the Coating/Substrate Interface during the Treatment of Conductors by an Electric Explosion Plasma

V. D. Sarychev, S. A. Nevskii, D. A. Romanov, A. Yu. Granovskii, A. D. Filyakov and K. V. Sosnin p. 289 abstract

Deformation and Fracture Mechanics

Model for the Interaction of a Rigid String with a Deformable Target

V. A. Goloveshkin and N. N. Myagkov p. 294 abstract

Experimental Identification of a Nonlinear Deformation Model for a Shape Memory Alloy during Phase and Structural Transformations

A. A. Movchan, S. A. Kazarina and A. L. Sil’chenko p. 301 abstract

Structure and Properties of the Deformed State

Effect of a Structure and Test Conditions on the Critical Strains and Stresses in Titanium Nickelide-Based Alloys

D. E. Gusev, M. Yu. Kollerov and R. E. Vinogradov p. 309 abstract

Effect of Cold Rolling and Subsequent Annealing on the Microstructure and the Microtexture of Austenitic Corrosion-Resistant Steels

M. V. Odnobokova and A. N. Belyakov p. 315 abstract

Effect of Megaplastic Deformation in a Bridgman Chamber at Various Temperatures on the Corrosion Resistance of VT1-0 Titanium

A. O. Cheretaeva, N. A. Shurygina, A. M. Glezer, A. G. Rakoch, A. A. Tomchuk and A. D. Medvedeva p. 326 abstract

Advanced Materials and Technologies

Mechanical Properties of a Carbon Fiber Reinforced Plastic–Titanium Nickelide Functional Composite Material

M. Yu. Kollerov, V. S. Spektor, A. A. Skoblin, S. I. Gurtovoi, A. V. Saakyan and D. E. Gusev p. 331 abstract

Basic Principles of Alloying and Treatment of High-Nitrogen Austenitic Corrosion-Resistant Steels

I. O. Bannykh and A. M. Glezer p. 336 abstract

Influence of the Crystallographic Texture of Aluminum Sheets on the Fracture Toughness of Metal–Polymer Composite Materials

F. V. Grechnikov, Ya. A. Erisov and I. N. Petrov p. 341 abstract

Influence of Alloying Elements on the Deformation Mechanism and the Texture of Magnesium Alloys

S. Ya. Betsofen, O. E. Osintsev, I. A. Grushin, A. A. Petrov and K. A. Speranskii p. 346 abstract

Texture and Anisotropy of the Mechanical Properties of Magnesium Alloys

S. Ya. Betsofen, O. E. Osintsev, I. A. Grushin, A. A. Petrov and K. A. Speranskii p. 361 abstract

Selective Deformation of Single Macromolecules and Biomolecular Structures as a Method for Remote Control of Their Properties and Functions for Next-Generation Medicine

Yu. I. Golovin, N. L. Klyachko, Al. O. Zhigachev, S. L. Gribanovskii, M. V. Efremova, A. G. Majouga and A. V. Kabanov p. 374 abstract

Adhesion Strength of Ceramic Coatings to Dental Ni–Cr Alloy Fabricated by Casting with 3D Printed Patterns

Ts. D. Dikova, N. A. Dolgov, T. G. Vasilev and I. P. Katreva p. 385 abstract

Fatigue Strength of an AlSi10Mg Alloy Fabricated by Selective Laser Melting

M. V. Gerov, E. Yu. Vladislavskaya, V. F. Terent’ev, D. V. Prosvirnin, O. S. Antonova and A. G. Kolmakov p. 392 abstract

Structural-Phase State and the Properties of Silumin after Electron-Beam Surface Treatment

Yu. F. Ivanov, V. E. Gromov, S. V. Konovalov, D. V. Zagulyaev and E. A. Petrikova p. 398 abstract

Applied Problems of Strength and Plasticity

Mechanical Properties and Structure of a VNS9-Sh Steel as Functions of the Tempering Temperature

V. F. Terent’ev, A. A. Ashmarin, E. N. Blinova, D. D. Titov, V. M. Blinov, A. K. Slizov and T. G. Seval’neva p. 403 abstract

Bending Failure of “Thick” Co-Based-Alloy Amorphous Wires

V. V. Molokanov, T. R. Chueva, N. V. Umnova, P. P. Umnov and A. V. Krutilin p. 409 abstract

Simulation of the Stamping of Spacing Grid Cells Made of Thin-Walled Zirconium Tubes

M. G. Isaenkova, Yu. A. Perlovich, O. A. Krymskaya, D. I. Zhuk, S. D. Stolbov, K. E. Klyukova and A. V. Ivanov p. 415 abstract

Microstructure and Mechanical Properties of the Fuel Cladding in VVER-1000 after the Thermal Tests That Model Dry Storage Conditions

G. P. Kobylyansky, A. V. Obukhov, A. O. Mazaev, E. A. Zvir, P. A. Ilyin and D. E. Markelov p. 421 abstract

Long-Term Annealing Resistance of Ferritic Chromium Steels Subjected to High-Temperature Nitriding

S. A. Nikulin, V. M. Khatkevich, S. O. Rogachev, B. E. Bekkaliev and V. A. Belov p. 427 abstract

Structure and Mechanical Properties of Cold-Deformed Galvanized Rolled Sheets for Light Thin-Walled Constructions

V. M. Goritskii, A. M. Kulemin and N. G. Silina p. 431 abstract

Influence of a Zinc Coating on the Mechanical Properties of a Low-Carbon Steel Microalloyed with Niobium

V. F. Terent’ev, D. V. Prosvirnin, A. Yu. Marchenkov, O. V. Rybal’chenko, O. S. Antonova and V. M. Matyunin p. 436 abstract

Strength Properties and Corrosion Resistance of Pump–Compressor Pipes Made of 15Kh5MFBCh Steel after Heat and Thermomechanical Treatment under Various Conditions

M. A. Vyboishchik, A. V. Ioffe and A. O. Zyryanov p. 442 abstract

Comparison of the Composite Materials Intended for Damping Elements for the Infrastructure of Rail Transport and Rolling Stock

E. G. Kurzina, A. G. Kolmakov, Yu. N. Aksenov, A. M. Kurzina, A. Yu. Bogachev and A. V. Semak p. 448 abstract

Diagnostics and Mechanical Test Techniques

Corrosion Cracking of Steels of Various Strengths at a Constant Crack Opening

A. V. Grinevich, N. O. Yakovlev, S. Yu. Skripachev and G. A. Nuzhnyi p. 453 abstract

Determination of the Crack Tip Position by Digital Image Correlation during Static and Cyclic Fracture Toughness Tests of Aluminum Alloys

V. V. Avtaev, N. O. Yakovlev, V. S. Erasov and N. Yu. Podzhivotov p. 458 abstract

Digital Image Correlation Study of the Elastoplastic Deformation of the Steel/CFRP Adhesive Joint

N. O. Kopanitsa, A. M. Ustinov, L. I. Trishkina, A. A. Klopotov, Yu. A. Abzaev and A. I. Potekaev p. 466 abstract

Application of Indentation for Estimating the Thermal Stability of Plasma Thermal Barrier Coatings

T. A. Il’inkova and E. A. Barsukova p. 471 abstract

Determination of the Strain-Hardening Exponent of a Metallic Material by Low-Speed Impact Indentation

A. P. Kren and V. A. Rudnitskii p. 478 abstract

Impact Toughness of the Gas Main Steel after Long-Term Operation under Extreme North Conditions

A. M. Bol’shakov and A. V. Burnashev p. 484 abstract