Vol. 2017, No. 4, 2017

Russian Metallurgy (Metally)

A simultaneous English language translation of this journal is available from Pleiades Publishing, Ltd.
Distributed worldwide by Springer. Russian Metallurgy (Metally) ISSN 0036-0295.

Physical Foundations of Strength and Plasticity

Chernov–Lüders Bands and the Portevin–Le Chatelier Effect as Plastic Flow Instabilities

L. B. Zuev, V. V. Gorbatenko and V. I. Danilov p. 231 abstract

Deformation and Fracture Mechanics

Method for Calculating the Limiting Technological Residual Stresses in a Tubular Billet

G. L. Kolmogorov and E. V. Kuznetsova p. 237 abstract

Investigation of Three-Layer Rectangular Panel Bending by Variation Method

N. V. Osadchiy, V. A. Malyshev and V. T. Shepel p. 240 abstract

Mechanisms of Hydrogen Embrittlement and Fracture of Nanocrystalline Materials

N. M. Vlasov and O. I. Chelyapina p. 245 abstract

Advanced Materials and Technologies

Effect of Plasma Immersion Ion Beam Processing on the Structure–Phase State and the Properties of the Surface Layers in Titanium Nickelide Samples

A. I. Lotkov, O. A. Kashin, D. P. Borisov, M. G. Ostapenko, A. A. Neiman, K. V. Krukovskii and E. Yu. Gudimova p. 250 abstract

New Deformability Characteristics of Zirconia-Based Plasma-Sprayed Thermal Barrier Coatings at Low Loads

T. A. Il’inkova and A. R. Ibragimov p. 255 abstract

Thermal Stability of the Microstructure of Silver Films

V. G. Sursaeva and A. B. Straumal p. 263 abstract

Effect of an Isothermal Action on the Functional Properties and the Shape Memory Effect Parameters of a TiNi(Mo, V) Alloy

E. S. Marchenko, G. A. Baigonakova, V. E. Gunther and T. L. Chekalin p. 267 abstract

Effect of Deformation and Heat Treatment on the Structure, the Mechanical Properties, and the Fracture Characteristics of an Ultrafine-Grained Zr–1Nb Alloy

G. P. Grabovetskaya, E. N. Stepanova, I. P. Mishin and V. A. Vinokurov p. 271 abstract

Mechanical Properties of the Compositions Based on Biopolyamide-1010 Modified by Carbon, Glass, and Cellulose Chopped Fibers

A. A. Nikiforov, S. I. Vol’fson, N. A. Okhotina, R. Rinberg, T. Hartmann and L. Kroll p. 279 abstract

Applied Problems of Strength and Plasticity

Nanoscale Localization of Plastic Deformation in Steel with a Bainitic Structure

Yu. F. Ivanov, V. E. Gromov, A. M. Glezer, E. N. Nikitina and K. V. Aksenova p. 283 abstract

Properties of the Welded Joints of Manganese Steel Made by Low-Frequency Pulsed Arc Welding

Yu. N. Saraev, V. P. Bezborodov, S. V. Gladovskii and N. I. Golikov p. 287 abstract

Influence of Heat Treatment on the Efficiency of Impact Fragmentation of Amorphous Alloy Fe_73.5Cu₁Nb₃Si_13.5B₉ Ribbons

P. A. Kuznetsov, E. A. Samodelkin, V. N. Klimov and A. A. Kashirina p. 293 abstract

Effect of Volume–Surface Quenching on the Impact Toughness of 20GL Steel Intended for Cast Freight Bogie Solebars

S. A. Nikulin, A. B. Rozhnov, V. Yu. Turilina, V. I. Zabolotnikova, A. A. Komissarov and T. A. Nechaikina p. 298 abstract

Microhardness of Anodic Aluminum Oxide Formed in an Alkaline Electrolyte

O. N. Kanygina and M. M. Filyak p. 302 abstract

Acoustic Emission Analysis of the Stages of Deformation of TRIP Steel

A. G. Penkin, V. F. Terent’ev, V. V. Roshchupkin, A. K. Slizov and V. P. Sirotinkin p. 306 abstract

Diagnostics and Mechanical Test Techniques

Scanning Probe Microscopy Estimation of the Wear Resistance of the Surface of a Modified PVC Film

A. S. Kochetkova, P. N. Gorbushin, E. A. Sosnov, K. Kolert and A. A. Malygin p. 312 abstract

Effect of the Strain Rate on the Mechanical Properties of a Sheet TRIP Steel with a High Martensite Content

E. A. Eliseev, V. F. Terent’ev, N. M. Voznesenskaya, A. K. Slizov, V. P. Sirotinkin, A. S. Baikin and G. S. Seval’nev p. 319 abstract

Development of Short Fatigue Cracks in Aluminum Alloy 2524-T3 Specimens

L. R. Botvina, G. I. Nesterenko, A. P. Soldatenkov, Yu. A. Demina and A. A. Sviridov p. 322 abstract

Ensemble of Secondary Cracks near the Fatigue Fracture Surface of a Titanium Alloy VT23M Specimen

A. V. Lavrov, V. S. Erasov, N. A. Nochovnaya and E. A. Kotova p. 330 abstract

Estimation of the Resistance to the Initiation of Fatigue Cracks in the Welded Joints of Steel Constructions

P. D. Odesskii, A. N. Shuvalov and O. V. Emel’yanov p. 334 abstract

Forces and Strains during Drop Weight Tear Test

M. A. Shtremel’, A. B. Arabei, A. G. Glebov, A. I. Abakumov, T. S. Esiev, A. O. Struin and B. A. Sarychev p. 339 abstract

Study of the Fracture Kinetics in Structural Aluminum Alloys Subjected to a Long-Term Action of a Static Load and a Corrosive Medium Using Specimens of a New Type