Vol. 2020, No. 3, 2020
Development of a Low-Temperature Bloomery Process for Nickel and Cobalt Recovery from Saprolite Ores
p. 165 abstract
Effect of the Annealing Temperature on the Aging-Induced Recovery in Magnesium Alloys with Rare-Earth Metals
p. 180 abstract
Effect of Small Lanthanum Additions on the Structure, the Phase Composition, and the Mechanical Properties of a Magnesium ML5pch Alloy in the As-Cast and Heat-Treated States
p. 187 abstract
Effect of Overload on the Near-Threshold Fatigue Crack Growth Rate in a 2024-T3 Aluminum Alloy: III. Analysis of the Efficiency of the Fatigue Crack Growth Models Used to Predict the Fatigue Life under Alternating Loading
p. 193 abstract
Lattice Superdeformation as the Synergy of Two Martensitic Transformations in Titanium Nickelide Alloys
p. 198 abstract
Comparison of the Helium Porosity Parameters in Vanadium Alloy TEM Samples Prepared by Various Techniques
p. 206 abstract
Viscosity of the Samarium and Co–25% Sm–18% Fe–5% Cu–3% Zr Alloy Melts
p. 212 abstract
Magnetic Hysteretic Properties of an Fe–25Cr–12Co Powdered Hard Magnetic Alloy
p. 216 abstract
Effect of the Conditions of Annealing of a Pr–Dy–Fe–Co–B Alloy on the Properties of the Sintered Magnets
p. 220 abstract
Structure and Mechanical Properties in the Submicrovolumes of Sintered KS25 (Co–Sm) Permanent Magnets
p. 225 abstract
Wear-Resistant Cast Iron Containing Spheroidal Graphite with a Two-Layer Ledeburitic–Martensitic Shell
p. 231 abstract
Effect of a Pulsed Plasma Beam on the Structure and the Phase Composition of the Surface Layers in Ferritic–Martensitic Steels
p. 238 abstract
Mechanism and Kinetics of the Carbothermic Reduction of Metals in the FeS–Ni3S2–CaO System
p. 250 abstract
Electromagnetic Device for Nondestructive Control of the Mechanical Properties of Thin-Walled Steel Vessels
p. 259 abstract