Contents

Russian Metallurgy (Metally)

Vol. 2026, No. 2, 2026

SPECIAL ELECTROMETALLURGY

Theory and Practice of Introducing Special Particles to Change the Chemical Composition of the Metal Pool during ESR

I. V. Chumanov, M. A. Matveeva, and D. V. Sergeev p. 207  abstract

Modern Additive Technologies of Selective Laser Growth of Metal Powder Articles

A. G. Grigor’yants and K. S. Elizavetskii p. 211  abstract

Production of Precursors for Intermetallic Titanium Alloys by Consolidation of a Powder Mixture Using Spark Plasma Sintering

N. N. Safronov, R. A. Bikulov, and G. F. Zhuravleva p. 218  abstract

Friction Stir Spot Welding of Thin 6013T4 Alloy Sheets

V. V. Ovchinnikov, P. S. Dmitrashko, D. M. Bogush, and A. N. Vasil’ev p. 224  abstract

Influence of the Tool Tilt Angle on the Thermal-Deformation Conditions of Weld Metal Structure Formation during Friction Stir Welding

V. V. Ovchinnikov, D. M. Bogush, R. B. Reztsov, M. A. Barykin, and I. S. Solov’ev p. 231  abstract

Technological Features of the Arc Welding of Metal Matrix Composites Based on Immiscible Components

I. N. Shiganov and V. V. Ovchinnikov p. 238  abstract

Comparative Characteristics of Welds Obtained by Laser and Electric Arc Welding of EK-61 Alloy Made by 3D Printing

R. A. Latypov, D. K. Starovoitov, and G. R. Latypova p. 243  abstract

Energy Efficiency of a DC ESR Furnace with the Possibility of Rotating the Consumable Electrode Body

I. A. Alekseev and I. V. Chumanov p. 248  abstract

Removal of Harmful Impurities from a Steel Melt during ESR under Various Current Conditions

I. A. Alekseev and I. V. Chumanov p. 251  abstract

Development of Electroslag Remelting Technology for Obtaining Multilayer Billets

M. A. Matveeva p. 254  abstract

Method for Calculating the Parameters of DC Electric Arc Welding with a Nonconsumable Electrode

M. M. Krutyanskii and S. M. Nekhamin p. 260  abstract

SIMULATION OF METALLURGICAL PROCESSES

Computational–Experimental Estimation of the Bond Strength of the Coating Formed by Electric Resistance Welding of a Woven Metal Mesh with Powder in Its Cells to Grade 45 Steel

G. R. Latypova, V. A. Strizheus, R. A. Latypov, and V. V. Chernov p. 269  abstract

Modeling of the Pouring a Liquid Master Alloy through a Siphon System into a Mold with Metallized Pellets

I. V. Chumanov, I. M. Yachikov, and D. V. Sergeev p. 276  abstract

Solution of a Heat Conduction Equation to Calculate the Temperature Fields in Continuous Casting Machine Rolls

I. D. Pospelov, D. I. Gabelaya, and M. A. Mashchenko p. 284  abstract

QUALITY, CERTIFICATION, AND COMPETITIVE ABILITY OF METAL PRODUCTS

Combined Effect of Thermal Cycling and Chemical-Thermal Treatments on the Structure and Properties of VT20 Titanium Alloy Workpieces

E. V. Ageev, A. Yu. Altukhov, G. R. Latypova, and L. P. Andreeva p. 290  abstract

Defect Detection Based on Analysis of Optical Images Taken during Additive Printing

A. L. Galinovskii, Ya. A. Nosov, M. I. Abashin, V. S. Boldyrev, D. A. Bunakov, and D. A. Martysyuk p. 295  abstract

QUALITY, CERTIFICATION, AND COMPETITIVE ABILITY OF METAL PRODUCTS

Influence of Chemical Composition on Strength Properties of Titanium Alloys at Operating Temperatures under Pressure Treatment

Yu. B. Egorova, L. V. Davydenko, and I. M. Mamonov p. 306  abstract

QUALITY, CERTIFICATION, AND COMPETITIVE ABILITY OF METAL PRODUCTS

Effect of Impurities Contained in Fuel and Air on Sulfide Corrosion of Turbine Blades of the Gas Turbine Engine

V. M. Samoilenko, G. T. Pashchenko, E. V. Samoilenko, and A. A. Gnezdilova p. 313  abstract

METALLURGICAL AND ELECTROTHERMAL EQUIPMENT

Innovative Development of Small‑Capacity Electric Furnace Steelmaking

I. M. Bershitskii, V. V. Vasil’ev, S. A. Kononov, and S. V. Orlov p. 319  abstract

Modernization of the Pig Iron Pouring Machine of the Flexible Modular Furnace in the Electric Steelmaking Shop of AO Ural Steel

P. V. Gavrish, D. R. Ganin, and S. M. Chebotarev p. 324  abstract

Restoration of Electric Arc Furnace Electrode Holders by Mechanized Arc Surfacing with Bronze Using a Flux-Cored Strip

V. V. Chigarev, V. N. Alistratov, D. A. Zarechenskii, N. A. Pestunova, and V. A. Shevchenko p. 330  abstract

HARDENING AND COATING TECHNOLOGIES

Cladding of Titanium Carbide Particles with Copper in a Planetary Mill

N. V. Kobernik, A. S. Pankratov, Yu. V. Andriyanov, and A. L. Galinovskii p. 334  abstract

Influence of Thermal Barrier Coatings on the Life of Gas Turbine Blades

N. V. Abraimov, I. G. Petukhov, V. V. Orekhova, M. S. Zarypov, and Yu. A. Gadieva p. 339  abstract

Magnetron Deposition of Thin-Film Cu–Mo Coatings on a VT6 Titanium Alloy

M. Yu. Slezko, V. V. Ovchinnikov, and M. A. Babuev p. 347  abstract

Experimental Study of the Influence of the Technology of Electron-Beam Deposition of a Thermal Barrier Coating on Its Structure

V. G. Opokin, R. G. Ravilov, V. M. Samoilenko, and G. T. Pashchenko p. 356  abstract

Adhesion of the Coatings Deposited by HVOF Spraying

Yu. A. Kuznetsov, A. V. Dobychin, D. D. Yakovlev, A. A. Gribakin, V. S. Pichev, and I. N. Kravchenko p. 361  abstract

Cladding of Titanium Carbide Powder Particles in a Planetary Mill

N. V. Kobernik, A. S. Pankratov, Yu. V. Andriyanov, A. L. Galinovskii, and S. D. Karpukhin p. 365  abstract

Effect of Carbon and Fullerene on Cladding Titanium Carbide Particles with Nickel and Copper

N. V. Kobernik, A. S. Pankratov, Yu. V. Andriyanov, and S. A. Korolev p. 372  abstract

Estimation of Nitrogen Penetration Depth during Hardening of VT20 Alloy

E. V. Ageev, A. Yu. Altukhov, A. S. Pereverzev, and A. E. Ageeva p. 378  abstract

Electric Spark Treatment of VT20 Titanium Alloy by T15K6 Hard Alloy

E. V. Ageev, A. Yu. Altukhov, N. N. Karpenko, and A. E. Ageeva p. 382  abstract

Technology for Restoring Bronze Turbocharger Bushings by Electric Resistance Welding of a Woven Metal Mesh

V. S. Natalenko, G. R. Latypova, R. A. Latypov, M. Alsobh, and M. N. Farkhshatov p. 387  abstract

PHYSICAL METALLURGY AND HEAT TREATMENT OF METALS AND ALLOYS

Fractographic Analysis of Single-Crystal Heat-Resistant Nickel Alloy Subjected to Thermomechanical Compression

V. V. Makhorin, M. I. Olenin, M. V. Staritsyn, M. A. Markov, I. N. Kravchenko, and A. N. Belyakov p. 393  abstract

Behavior of Metal with Shape Memory Effect and Superelasticity under Deformation

I. N. Kravchenko, D. U. Khasyanova, S. I. Nekrasov, and Yu. V. Kataev p. 400  abstract

PHYSICAL METALLURGY AND HEAT TREATMENT OF METALS AND ALLOYS

Achieving the Potential Designed Abilities of an Intermetallic Ni3Al-Based Alloy

O. A. Bazyleva, E. G. Rimsha, N. I. Artemenko, and A. N. Raevskikh p. 406  abstract

RESOURCE SAVING

The Influence of the Working Environment on the Composition, Properties, and Structure of Tungsten Electroerosion Powders

E. V. Ageeva, G. R. Latypova, D. A. Ulitin, and A. E. Andreeva p. 417  abstract

X-ray Studies of the Iron–Chromium–Nickel Powders Produced by Electroerosion Dispersion of Kh25N20 Alloy Waste

E. V. Ageev, L. P. Andreeva, G. R. Latypova, and A. E. Andreeva p. 424  abstract

PROBLEMS OF ECONOMICS

Features of Steel Production Management in the Modern World Economy

S. V. Bogdanov, S. Yu. Nechaev, and T. V. Bogdanova p. 429  abstract