Vol. 2025, No. 2, 2025
Radiative Contribution to Thermal Conductivity for FLiNaK–CeF3 Molten Mixtures Used as an Example
p. 247 abstract
Mechanism of the Joint Electroreduction of La3+ and Ni2+ Ions in a KCl–NaCl–CsCl Eutectic Melt at 823 K
p. 252 abstract
Phase Diagrams of the FeO–MnO–MgO–SiO2 Oxide System: Binary MnO–SiO2 and MgO–SiO2 Oxide Systems
p. 263 abstract
Phase Diagrams of the FeO–MnO–MgO–SiO2 Oxide System: Ternary FeO–MnO–SiO2, FeO–MgO–SiO2, and MgO–MnO–SiO2 Phase Diagrams
p. 269 abstract
Effect of Temperature on the Diffusion of the \({\text{A}}{{{\text{l}}}_{2}}{\text{Cl}}_{7}^{ - }\) Anion in a Low-Temperature Triethylamine Hydrochloride–Aluminum Chloride Melt
p. 274 abstract
Physicochemical Properties of Lithium–Vanadium Li1.3V3O8 Bronze Synthesized from a Melt
p. 279 abstract
Adsorption at the Ni and Ti Interface in a LiCl–KCl Melt: Molecular Dynamics Simulation
p. 285 abstract
Electrochemical Behavior of Uranium Ions in Lithium and Beryllium Fluoride Melts
p. 293 abstract
Structures of Phosphate Melts Based on Lithium Metaphosphate in a Model Experiment
p. 300 abstract
Aluminizing as a Method to Reduce the Degradation of Structural Materials in Molten Lead
p. 307 abstract
Stability of Gold Nanotubes
p. 319 abstract
Synthesis and Modification of the Surface of Electrolytic Nickel Foams as Catalytically Active Electrode Materials for Hydrogen Production by Electrolysis
p. 323 abstract
Influence of the Anionic Composition on the Electrical Conductivity of Beryllium-Containing Molten Salt Mixtures
p. 332 abstract
Interaction of 16Kh12MVSFBR Steel with Nitrogen at 650–800°C
p. 341 abstract
Effect of the Redox Potential of a Medium on the Degradation of 12Kh18N10T Steel the FLiNaK–TiF4/TiF3 Melt
p. 348 abstract
Bulk Crystallization of Supercooled Binary Melts with Allowance for Crystal Growth Rate Fluctuations
p. 354 abstract
Physicochemical Properties of Li6.6Al0.05La3Zr1.75Nb0.25O12 Films Fabricated by Tape Casting on Metal Substrates
p. 364 abstract
Two-Step Nucleation and Growth of Crystals in a Supersaturated Solution with Allowance for Mass Exchange with the Environment
p. 371 abstract
Effect of Li2O and LiOH on the Corrosion Behavior of Fe, Co, Ni, and 29NK Alloy in the FLiNaK Melt
p. 386 abstract
Activity Coefficients and Solubility of Uranium in Liquid-Metal Pb–Sn Alloys
p. 395 abstract
Effect of a Co–Mo–P–O Catalyst on the Electrochemical Properties of Electrolytic Nickel Foams
p. 400 abstract
Emissivity of the Period V Metallic Elements of the Periodic Table during Melting: Correlation with Thermophysical Properties
p. 409 abstract
On the Possibility of Synthesizing Polycrystalline Antimony-Doped Indium–Gallium–Zinc Oxide
p. 415 abstract
Diffusion Boriding of VT1-0 and VT16 Titanium in an Oxide–Halide Salt Melt
p. 421 abstract
Effect of Melting Conditions on the Phase and Structural Composition of an Al–Ti–Zr–V–Nb–Fe Coating
p. 428 abstract
Physicochemical Interaction in the TiAl–Nb/V Systems during Aluminothermic Synthesis
p. 435 abstract
Effect of Laser Melting of Ni–B–Si Coatings on the Phase and Element Distribution in the Base Material
p. 443 abstract
Effect of Rare-Earth Elements (Gd, Y) on the High-Temperature Oxidation of Al–Ti–(Nb,Ta) Alloys
p. 451 abstract
Synthesis of Indium–Gallium–Zinc Oxide with an Increased Indium Content by Solid-State Reaction
p. 458 abstract
Possibility of High-Entropy Alloy Formation: A Brief Review
p. 464 abstract
Influence of CaF2 on the Liquidus Temperature and Density of the Molten (СаСl2–КCl)–CaF2 System
p. 470 abstract