Vol. 2020, No. 13, 2020

Russian Metallurgy (Metally)

Methods of Studying the Structure and Properties of Materials

Technological Properties of Metallized Carbon Cloth

I. V. Chudnov, V. A. Nelyub and A. N. Marycheva p. 1453 abstract

Hardening of Titanium and Iron–Chrome–Nickel Alloy Samples to Increase Their Strength, Life, and Fatigue Properties

A. A. Skvortsov and E. O. Gnatyuk p. 1458 abstract

Deformation of Corset-Shaped Specimens during Cyclic Heating

S. P. Degtyareva and E. F. Sidokhin p. 1463 abstract

Processes of Manufacture of Ferrous and Nonferrous Metals

Effect of Filtration on the Structure and Properties of an EP-648-VI Nickel Superalloy

A. I. Demchenko, A. I. Ryabtsev, V. A. Korovin, S. V. Belyaev and I. O. Leushin p. 1468 abstract

Some Features of the Sulfuric Acid Leaching of the Reduced Ferriferous Oxidized Nickel Ore

Yu. V. Zablotskaya, G. B. Sadykhov, T. V. Olyunina, M. Sh. Khasanov and V. B. Smirnova p. 1472 abstract

Physical Metallurgy. Thermal and Thermochemical Treatment Technologies

Thermal Conductivity of the Materials Based on Silicon Carbide and Silicon Nitride

S. N. Perevislov, M. A. Markov, Yu. A. Kuznetsov, I. N. Kravchenko and A. V. Krasikov p. 1477 abstract

Effect of Chromium Carbide Introduced into a Flux Cored Wire Charge on the Structure and Properties of the Hardfacing Deposit

N. V. Kobernik, A. S. Pankratov, S. S. Sorokin, V. V. Petrova, A. L. Galinovskii, A. G. Orlik and D. V. Stroitelev p. 1485 abstract

Plastic Deformation of Ferrous and Nonferrous Metals

Parameters of the Plastic Deformation of a Filler Wire during Electrical-Contact Welding

M. Z. Nafikov, I. I. Zagirov, Kh. T. Karimov and R. F. Masyagutov p. 1491 abstract

Electrophysical, Electrochemical, and Other Treatment Methods

Laser Alloying of the Surface Layers of Aluminum Alloys for Improving Their Wear Resistance

V. D. Aleksandrov, L. G. Petrova, M. V. Morshchilov and A. S. Sergeeva p. 1496 abstract

Effect of Plasma Treatment of a Carbon Tape before the Deposition of a Metallic Coating onto It

V. A. Nelyub p. 1502 abstract

Analytical Study of the Appearance of Heat Sources on the Surface of a Part during Electrospark Alloying

I. S. Kuznetsov, Yu. A. Kuznetsov, I. N. Kravchenko, A. V. Kolomeichenko and T. A. Labusova p. 1507 abstract

Method of Convex Marking of the Surfaces of Steel Products Using a Pulsed 50-W Infrared Fiber Laser

D. V. Amyaga, S. G. Gornyi and S. A. Vologzhanina p. 1513 abstract

New Materials. Technology of Composite Materials

Decreasing the Specific Amount of Metal in the Working Equipment of Road Machines Using of Polymer Composite Materials with a Honeycomb Filler

E. A. Kosenko, N. I. Baurova and V. A. Zorin p. 1518 abstract

Formation and Properties of Steel–Iron Aluminide Composites

A. I. Kovtunov, Yu. Yu. Khokhlov and S. V. Myamin p. 1522 abstract

Service Properties of Composites with Various Types of Hybrid Matrices

E. A. Kosenko, N. I. Baurova and V. A. Zorin p. 1526 abstract

Technology for Producing a Promising Aluminum-Matrix Composite Material with Discrete Al₂O₃ Fibers

Yu. A. Kurganova, S. P. Shcherbakov, Itszin’ Chen’ and S. D. Karpukhin p. 1531 abstract

Use of Carbon Nanotubes for Modifying the Microstructure and Mechanical Properties of Al–Mg Alloys

F. Yu. Isupov, M. Yu. Zamozdra, I. V. Mushnikov and O. V. Panchenko p. 1537 abstract

Coating Deposition

Effect of the Plasma Electrolytic Oxidation Time of an ML10 Alloy in a Silicate–Phosphate Electrolyte on the Structure and Properties of the Coating

I. A. Kozlov, S. S. Vinogradov, V. A. Duyunova, S. A. Naprienko and V. A. Manchenko p. 1542 abstract

Effect of the Coatings of Mating Parts on the Strength of Interference Fit Joints

N. E. Kurnosov and A. V. Tarnopol’skii p. 1550 abstract

Improving the Reliability of the Corrosion Protection of Steel Products with Zinc Coatings by Nitriding

L. G. Petrova, G. Yu. Timofeeva, A. V. Kosachev and M. V. Morshchilov p. 1554 abstract

Machining of Blanks and Assembly

Study of the Antiwear Properties of a Cutting Fluid during Metal Cutting

S. M. Gaidar, M. Yu. Karelina, A. M. Kolokatov and A. V. Pydrin p. 1561 abstract

Specific Features of Turning Parts Made of Polymer Materials

V. A. Skryabin and A. G. Skhirtladze p. 1565 abstract

Welding Technologies. Soldering

Properties of Ti–Ni Wire Welded Joints

A. R. Khismatullin, I. V. Kladov, O. V. Panchenko and D. V. Kurushkin p. 1570 abstract

Metal Forming

Hot Plastic Deformation of Titanium Alloys Reflected on Process Maps

V. I. Alekseev, B. K. Barakhtin and G. A. Panova p. 1575 abstract

Effect of the Main Parameters of Transverse Rolling Straightening by Smooth Plates on the Quality of Cylindrical Parts

S. A. Zaides and Le Khong Kuang p. 1579 abstract

Quality Control of Equipment, Constructions, and Materials

Effect of the Technological Heredity Factors on the Quality Indicators of Adhesive and Weld-Bonded Joints Performed under Various Temperature Conditions

N. I. Baurova and A. Yu. Konoplin p. 1585 abstract

Powder Metallurgy Technologies

Development of a Binder System for the Powder Injection Molding of Titanium: Foreign and Russian Experience. Part 1

A. B. Semenov, A. N. Muranov, A. A. Kutsbakh, D. M. Krotov, I. A. Logachev and B. I. Semenov p. 1590 abstract

Automation and Computerization of Technological Processes

Simulation of the Control System of the Coke Calcination in Tubular Rotary Kilns

T. V. Dontsova, K. G. Kozulin, T. V. Piskazhova and G. B. Danykina p. 1600 abstract

Equipment and Devices

Increasing the Resistance of the Heat-Insulating Insert in the Air Tuyere of a Blast Furnace

A. G. Radyuk, A. E. Titlyanov and T. Yu. Sidorova p. 1607 abstract

Estimation of the Results of Predictive Simulation of a Rational Cutting Material

B. Ya. Mokritskii, O. G. Shakirova, A. A. Sosnin, E. S. Sitamov and A. I. Erukov p. 1613 abstract

Kinematics of a Planetary Roller–Screw Gear with a Drive Nut

O. A. Ryakhovskii and N. O. Romanov p. 1619 abstract

Repair and Modification of Equipment

Active Control of the Inside Diameter of Diesel Engine Cylinder Liners during Their Honing

V. P. Lyalyakin and D. B. Slinko p. 1623 abstract

Foundry

Technology of Producing Cast Billets Made of a High-Temperature Composite Material Based on the Nb–Si System

P. G. Min, V. E. Vadeev and V. V. Kramer p. 1627 abstract

Pipe and Tube Production

Mathematical Model for Continuous Tube Rolling and the Effect of Technological Factors on Surface Defect Formation

V. A. Toporov, P. A. Ibragimov, O. A. Panasenko, D. Sh. Nukhov and A. O. Khalezov p. 1632 abstract

Piercing of a Billet in a Mill with Guide Disks

A. V. Goncharuk, Yu. V. Gamin, I. K. Sharafanenko and A. S. Aleshchenko p. 1637 abstract

Information. Exchange of Best Practices

Atomic Layer Deposition of the Lithium–Silicon–Tin Oxide System for Solid-State Thin-Film Lithium Batteries

I. V. Mitrofanov, D. S. Nazarov, A. A. Popovich and M. Yu. Maximov p. 1643 abstract

Quality Management and Certification

Use of Information Technologies for the Integration of an Enterprise Quality Management System with the Requirements of the Related Standards

V. A. Vasiliev, Yu. V. Velmakina, A. B. Mayborodin and S. V. Aleksandrova p. 1644 abstract

Possibilities for the Integration of Quality Management Tools and Methods with Digital Technologies

V. A. Vasiliev, S. V. Aleksandrova, M. N. Aleksandrov and Yu. V. Velmakina p. 1649 abstract

Safety Engineering. Ecological Problems of Technologies

Chemical Interactions of Red Mud during the Cleaning of an Industrial Gases Ejected to the Atmosphere from Harmful Impurities

A. B. Lebedev and V. A. Utkov p. 1653 abstract

Processes, States, and Properties

State of Stress in the Near-Contact Region of a Semiconductor during Metallization Track Electrodegradation

A. A. Skvortsov, S. M. Zuev, M. V. Koryachko and E. B. Voloshinov p. 1658 abstract

Contents