Contents

Russian Metallurgy (Metally)

Vol. 2019, No. 13, 2019

Methods of Studying the Structure and Properties of Materials

Analysis of the Structure of the Adsorbed Polymer Layers on the Surfaces of Metal Oxide Microparticles Using Digital Image Processing

N. A. Bulychev, M. A. Kazaryan, A. I. Erokhin, A. S. Averyushkin, L. N. Rabinskiy, V. V. Bodryshev and B. A. Garibyan p. 1319  abstract

Phase States of Carbon, Oxygen, Sulfur, Phosphorus, Silicon, and Lead Impurities. Thermodynamics of Formation and Kinetics of Removal of the Impurities in a Cast ZhS36-VI Nickel Superalloy

D. E. Kablov, V. N. Simonov and N. V. Simonov p. 1326  abstract

Determination and Comparison of the Microhardness of Hardening Coatings

V. M. Matyunin, A. Yu. Marchenkov, N. Abusaif and N. A. Stasenko p. 1334  abstract

Application of DAFS for the Estimation of the Elemental Composition of Tool Nanostructures

A. A. Kovalev, E. M. Lobanova and V. A. Zavozin p. 1337  abstract

Powder Metallurgy Technologies

Contamination of a Recirculated Powder Material during Selective Laser Synthesis

A. G. Evgenov, S. V. Shurtakov, S. M. Prager and R. Yu. Malinin p. 1343  abstract

Development of a Technique to Simulate the Injection Molding of Metallic-Powder-Filled Polymers

A. B. Semenov, A. A. Kutsbakh, A. N. Muranov and B. I. Semenov p. 1351  abstract

Structure and Tribological Properties of the Wear-Resistant Coatings Deposited Using Flux-Cored Wires Modified by Tantalum and Tungsten

G. G. Vinokurov, M. I. Vasil’eva, A. K. Kychkin and L. V. Moskvitina p. 1357  abstract

New Materials. Technology of Composite Materials

Deformation Characteristics of the Aerobraking Shell Material

L. N. Rabinskii, A. L. Medvedskii, D. V. Nushtaev and D. V. Lyskov p. 1363  abstract

Algorithm for the Optimization of the Technological Conditions of Forming Epoxy-Matrix-Based Composites

Ya. Chen’, M. A. Gorodetskii, V. A. Nelyub and G. V. Malysheva p. 1369  abstract

Technologies of Production of Layered Composites

A. N. Marycheva, T. A. Guzeva, P. M. P’e, L. Kh. Tun and G. V. Malysheva p. 1373  abstract

Quality Control of Equipment, Constructions, and Materials

Technological Heredity during the Production and Operation of Structural Materials

A. I. Rudskoi and N. I. Baurova p. 1378  abstract

Climatic Workability of the Polymer Composite Materials Used for Repairing Machines

A. Yu. Konoplin and N. I. Baurova p. 1384  abstract

Analysis of the Prospects of Ultrajet Diagnostics for Estimating the Wear Resistance of Bimetallic Tool

Li Syueyan’, V. S. Semashko, A. L. Galinovskii, V. D. Belov and M. I. Abashin p. 1389  abstract

Coating Deposition

Formation of Nickel–Phosphorus Coatings Applied on the Components Manufactured from Nonferrous Metals and Alloys

V. A. Skryabin and A. G. Skhirtladze p. 1395  abstract

Consumable Tool for Coating Deposition by Joint Deformation of the Base and Tool Materials

F. Yu. Isupov, O. V. Panchenko, A. A. Naumov, M. D. Alekseeva, L. A. Zhabrev and A. A. Popovich p. 1399  abstract

Mechanical Characteristics of Steels with a Gas-Phase Nickel Coating

G. V. Pachurin, N. A. Kuz’min, A. A. Filippov and T. V. Nuzhdina p. 1407  abstract

Elemental Composition and Microhardness of the Coatings Prepared on Faced Aluminum Alloys by Plasma Electrolytic Oxidation in a Silicate–Alkaline Electrolyte

A. V. Kolomeichenko and I. N. Kravchenko p. 1410  abstract

Structure of the Modified Layer Prepared by Nitriding of Carbon Steel with a Zinc-Filled Coating

L. G. Petrova, P. E. Demin, G. Yu. Timofeeva and A. V. Kosachev p. 1414  abstract

Technological Methods for Increasing the Life of Machine Components

Yu. A. Kuznetsov, I. N. Kravchenko, A. A. Sevryukov and M. A. Glinskii p. 1421  abstract

Metal Corrosion. Physical Aging of Nonmetallic Materials

Life Cycle of Products Made of Polymer Composite Materials

V. A. Nelyub p. 1427  abstract

Electrophysical, Electrochemical, and Other Processing Methods

Selective Laser Melting of Corrosion-Resistant Steel

G. V. Ratkevich, A. V. Zhdanov, L. V. Belyaev, V. I. Yugov and L. E. Afanas’eva p. 1433  abstract

Mass Transfer of a Nanocrystalline 5BDSR Alloy during Low-Voltage Electrospark Treatment

I. S. Kuznetsov and A. V. Kolomeichenko p. 1438  abstract

Increasing the Service Life of Farming Machines by Surface–Energy Modification of Tribounit Surfaces by Fluocarbon Surfactants

N. Yu. Bugakova, S. M. Gaidar, M. Yu. Karelina and V. M. Prikhod’ko p. 1442  abstract

Microstructure and Mechanical Properties of Light Cellular Constructions Made of a VT6 Alloy by Selective Laser Melting

V. Sh. Sufiyarov, E. V. Borisov, I. A. Polozov, V. V. Sokolova and A. A. Popovich p. 1448  abstract

Metal Forming

Designing and Calculation of Extruded Sections of an Inhomogeneous Composition

A. V. Babaytsev and A. A. Zotov p. 1452  abstract

Maximum Feed in Forging in a Radial-Forging Machine with the Jigging Motion of Head Levers

I. I. Nekrasov, A. A. Fedulov and V. S. Parshin p. 1456  abstract

Engineering Estimation of the Error of Bending of Angle Blanks in a Tool Die

V. A. Tarasov, V. D. Baskakov, M. A. Baburin, K. A. Karnaukhov and R. V. Boyarskaya p. 1460  abstract

Experimental Estimation of the Technological Indices of the Machining of Metals by Edge Tool at an Ultrahigh Cutting Speed

V. M. Korneeva and S. S. Korneev p. 1466  abstract

Welding Technologies. Soldering

Core Structure Formation in the Joints Fabricated by Friction Stir Welding of Metals with Polymorphic Transformations

A. A. Chularis, R. A. Rzaev, O. G. Zotov and A. O. Zotova p. 1471  abstract

Comparative Estimation of the Qualities of the Titanium Alloy Joints Made by Traditional Argon-Arc Welding and Innovative Arc Welding with Alternate-Pulsed Supply of Different Protective Gases

G. P. Fetisov, R. G. Tazetdinov, A. S. Persidskii and N. O. Strizhevskaya p. 1479  abstract

Machining of Blanks and Assembly

Effect of Machining of the Edge of a Blank Made of a Polymer Composite Material on Its Water Resistance

R. Ch. Ikhuaen’i and N. I. Baurova p. 1483  abstract

State of Stress in Cylindrical Parts during Transverse Straightening

S. A. Zaides and Le Hong Quang p. 1487  abstract

Physical Metallurgy. Thermal and Thermochemical Treatment Technologies

Technology of Borating Hardening of the Chaff-Cutter Drum Knives in a Grain Harvester Combine

V. P. Lyalyakin, V. A. Aulov, A. V. Ishkov, A. Yu. Trokhin and D. B. Slinko p. 1492  abstract

Key Differences between the Technology of Production of GTE Disk Blanks from Nickel Superalloy Granules and the Technology of Isothermal Deformation: A Review

A. M. Volkov, M. M. Karashaev, M. N. Letnikov and M. M. Bakradze p. 1497  abstract

Near-Surface Layer during the Heterogeneous Heterophase Oxidation of Metals and Alloys and the Related Chemical and Technological Aspects

S. D. Pozhidaeva and A. M. Ivanov p. 1502  abstract

Low-Temperature Oxidation of Metals and Alloys for Processing Secondary Raw Materials into Chemical Products

S. D. Pozhidaeva and A. M. Ivanov p. 1510  abstract

Quality Management and Certification

Quality Management in Manufacturing and Technological Systems

V. A. Vasil’ev, E. Yu. Barmenkov, E. B. Bobryshev and D. B. Nosova p. 1518  abstract

Electrophysical, Electrochemical, and Other Processing Methods

Action Time and Amplitude–Frequency Characteristics of Gas Pulses during the Treatment of Steel Machine Components by Pulsed Gas Flows

D. A. Ivanov and O. N. Zasukhin p. 1522  abstract

Processes of Manufacture of Ferrous and Nonferrous Metals

Improvement of the Processing of Sulfate Lead Raw Materials Containing Noble Metals

V. S. Chekushin, N. V. Oleinikova, M. V. Chekushin and L. A. Volkova p. 1526  abstract

Comparative Analysis of the Mechanical Properties of the Friction Stir Welding Joints of Various Aluminum Alloys

E. N. Ryl’kov, F. Yu. Isupov, A. A. Naumov, O. V. Panchenko and L. A. Zhabrev p. 1531  abstract