Vol. 2017, No. 13, 2017

Russian Metallurgy (Metally)

A simultaneous English language translation of this journal is available from Pleiades Publishing, Ltd.
Distributed worldwide by Springer. Russian Metallurgy (Metally) ISSN 0036-0295.

Foundry

Detection of a Pool in Semi-Continuous Castings Made of Heat-Treatable Aluminum Alloys

G. G. Krushenko and V. P. Nazarov p. 1087 abstract

Creep of the Investment Mold Material

I. O. Leushin, L. I. Leushina and O. S. Koshelev p. 1092 abstract

Powder Metallurgy Technologies

Optimization of the Technological Synthesis of Refractory Compounds

S. M. Gaidar, M. Yu. Karelina, V. M. Prikhod’ko and A. A. Volkov p. 1096 abstract

Nonmetallic Materials and Their Processing into Products

Increasing the Efficiency of the Recycling of Propylene–Polyethylene Raw Materials

T. D. Belokon’, Yu. A. Kurganova, D. A. Bragin and M. N. Kovalev p. 1099 abstract

New Materials. Technology of Composite Materials

Polyimides Exhibiting a Negative Electrorheological Response

N. A. Semenov, E. S. Kelbysheva, A. N. Vlasov and L. N. Rabinskii p. 1103 abstract

Optimization of the Component Compositions in a Composite Material Made of Mechanically Alloyed Cu–Al–O–C Granules and a Copper-Based Binder

V. A. Dovydenkov, A. V. Dovydenkova, M. V. Yarmolyk and G. P. Fetisov p. 1109 abstract

Methods of Enhancing the Operating Characteristics of Gas-Turbine Blades

O. G. Ospennikova, E. M. Visik, V. V. Gerasimov and E. V. Kolyadov p. 1112 abstract

Physical Metallurgy. Thermal and Thermochemical Treatment Technologies

Formation of an Intermetallic Layer during Arc Facing of Aluminum Alloys onto a Steel Substrate

V. V. Kovalev, R. S. Mikheev, N. V. Kobernik, A. L. Galinovskiy and I. V. Ershov p. 1118 abstract

Causes of Cracking in Quenching of the Parts Made of Steels and Cast Iron and Recommendations for Their Removal: A Review

A. A. Kuznetsov and V. I. Rudnev p. 1125 abstract

Metal Forming

Choice of Strip Tension Conditions for One-Zone Rolling with One Forward Region

L. S. Kokhan, Yu. A. Morozov and Yu. B. Slavgorodskaya p. 1131 abstract

Application of Thickness-Shaped Workpieces to Control the Wall Thickness of Lead-Formed Shell Parts

M. A. Baburin, V. D. Baskakov, O. V. Zarubina, S. V. Ladov, Ya. M. Nikol’skaya and S. V. Fedorov p. 1136 abstract

Machining of Blanks and Assembly

Machining of Machine Elements Made of Polymer Composite Materials

N. I. Baurova and K. A. Makarov p. 1141 abstract

Quality Control of Equipment and Constructions

Express Control of the Mechanical Properties of High-Strength and Hard-to-Machine Materials at All Stages of the Technological Cycle of Producing Mechanical Engineering Products

V. M. Matyunin, A. Yu. Marchenkov, A. N. Demidov and M. A. Karimbekov p. 1145 abstract

Diagnostic Inspection of Pipelines for Estimating the State of Stress in Them

V. A. Subbotin, Yu. V. Kolotilov, V. Yu. Smirnova and S. K. Ivashko p. 1150 abstract

Graphical Analysis of the State of Stress in Road Harrow Cutters

N. D. Seliverstov and A. V. Stasyuk p. 1154 abstract

Alternative Production and Treatment Methods

Formation of Threaded Surfaces in the Components Produced by 3D Printing

I. S. Nefelov and N. I. Baurova p. 1158 abstract

Safety Engineering. Ecological Problems of Technologies

Sorption Ability of Carbon Fibrous Material to Remove Heavy Metal Ions and Oil Products from Sewage

A. I. Syutova, S. Ya. Alibekov, N. P. Syutov and G. P. Fetisov p. 1161 abstract

Coating Deposition

Development and Implementation of Methods and Means for Achieving a Uniform Functional Coating Thickness

A. V. Shishlov, G. R. Sagatelyan and V. D. Shashurin p. 1165 abstract

Effect of Thin Polymer Coatings on the Mechanical Properties of Steel Plates

A. V. Babaytsev, M. I. Martirosov, L. N. Rabinskiy and Yu. O. Solyaev p. 1170 abstract

Repair and Modification of Equipment

Technology of Repairing Abrasive Tools

A. G. Skhirtladze and V. A. Skryabin p. 1176 abstract

Methods of Studying the Structure and Properties of Materials

Effect of Transition Metals on the Properties of Aluminum–Lead Composite Materials

A. I. Kovtunov, Yu. Yu. Khokhlov and S. V. Myamin p. 1182 abstract

Application of X-ray Diffraction Methods to Studying Materials

A. A. Kovalev, L. A. Tishchenko, V. D. Shashurin and A. L. Galinovskii p. 1186 abstract

Equipment and Devices

Investigation of Deposits in Channels of Panels of a Heat-Transfer Agent

S. I. Koshoridze, Yu. K. Levin, L. N. Rabinskiy and A. V. Babaytsev p. 1194 abstract

Cavitation Fracture of the Typical Materials Used in Hydraulic Machines and Units

A. A. Kovalev and N. N. Kuznetsov p. 1202 abstract

Processes of Manufacture of Ferrous and Nonferrous Metals

Aluminum-Alloyed Cast Iron with Compact Graphite Inclusions from Fine Production Wastes

N. N. Safronov, L. R. Kharisov and G. N. Safronov p. 1207 abstract

Contents