Contents

Russian Metallurgy (Metally)

Vol. 2020, No. 12, 2020

Manufacture of Ferrous and Nonferrous Metals

Optimum Deoxidation of a Kh65NVFT Chromium–Nickel Alloy Containing Refractory Metals

S. B. Rumyantseva, B. A. Rumyantsev, V. N. Simonov, G. S. Sprygin and V. N. Kashirtsev p. 1349  abstract

Scheme for Producing Electrodes from a Granular KhN51KVMTYuB (EP741NP) Nickel Superalloy

I. V. Kabanov, T. N. Sidorina, A. V. Lisovskii, N. V. Tokareva and A. I. Logacheva p. 1355  abstract

On the Prospects of Introduction of Modifying Carbides WC and B4C in the Production of 12Kh18N10T Steel Used in Power Engineering Industry

I. V. Chumanov, M. A. Matveeva and A. N. Anikeev p. 1362  abstract

Simulation of Metallurgical Processes

Mathematical Model for the Electric and Temperature Fields in the Heat-Affected Zone during Electrocontact Welding

V. V. Bulychev, G. R. Latypova and S. A. Golubina p. 1366  abstract

Electromagnetic Stirring in an Electric Arc Metal Melt

V. N. Anikeev and M. Yu. Dokukin p. 1372  abstract

Theory of Metallurgical Processes

Thermodynamics of the Oxygen Solutions in Carbon-Containing Ni–Co Melts

A. A. Aleksandrov and V. Ya. Dashevskii p. 1376  abstract

Metallurgical and Electrothermal Equipment

Heating of the Hollow Cathodes of Vacuum Plasma Generators

A. V. Cherednichenko and L. E. Cherednichenko p. 1383  abstract

Control of Technological Processes

MHD Method for Calculating Some Parameters of Liquid Metal Flow and Solidification

G. A. Dubskii, K. N. Vdovin, S. I. Shakhov, L. G. Egorova and A. A. Nefed’ev p. 1390  abstract

Manufacture of Special Metal Products

Electrochemical Refining of an Aluminum Chloride Solution Suitable for the Production of Alumina from the Domestic Raw Materials of the Troshkovskoe Deposit

A. P. Lysenko and E. S. Kondrat’eva p. 1397  abstract

Hardening and Coating Technologies

Effect of the Composition and Structure of Al–Si–Y and Ni–Cr–Al–Y Coatings on Gas-Turbine Blades on the Service Life

N. V. Abraimov, V. V. Lukina and M. S. Zarypov p. 1404  abstract

Resource Saving

Fluxes for the Slag Melting of Metallic Radioactive Wastes to Return Fissionable Materials to a Nuclear Fuel Cycle

I. V. Kuznetsov, M. Yu. Kalenova, A. S. Shchepin and O. N. Budin p. 1411  abstract

Composition, Structure, and Properties of the Electroerosive Powders Fabricated from the Wastes of a VNZh Alloy in Distilled Water

E. V. Ageev and R. A. Latypov p. 1423  abstract

Quality, Certification, and Competitive Ability of Metal Products

Stress Cracking of the Metal in 08Kh18N9 Steel Pipelines

A. B. Korostelev, A. N. Romanov, A. V. Goryachikh and N. V. Romanova p. 1428  abstract

On Taking into Account the Statistical Nature of Objects in Structural Analysis in Metals Science

A. V. Kudrya, E. A. Sokolovskaya, V. Yu. Perezhogin and D. F. Kodirov p. 1435  abstract

Structure, Phase Composition, and Mechanical Properties of a Boron-Containing High-Nitrogen Austenitic Steel Made by Induction Melting

I. O. Bannykh, O. A. Bannykh, L. G. Rigina, E. N. Blinova, K. Yu. Demin and I. N. Lukina p. 1439  abstract

Problems of Economics

Analysis of the Competitive Environment in the Financial Sphere of Interaction between Major Russian Banks and Metallurgical Holdings

S. V. Bogdanov and T. V. Bogdanova p. 1446  abstract