Vol. 2017, No. 12, 2017

Russian Metallurgy (Metally)

A simultaneous English language translation of this journal is available from Pleiades Publishing, Ltd.
Distributed worldwide by Springer. Russian Metallurgy (Metally) ISSN 0036-0295.

Manufacture of Ferrous and Nonferrous Metals

Effect of Secondary Melt Refining on the Properties of an EP602 Nickel Superalloy

A. G. Tyagunov, E. E. Baryshev, G. V. Tyagunov and K. Yu. Shmakova p. 999 abstract

Electric Melting of Iron-Ore Prereduced Pellets in an Electric Arc Furnace

E. E. Merker, L. N. Krakht, O. I. Malakhova, A. A. Kozhukhov, E. A. Chermenev, V. O. Kazartsev and V. A. Stepanov p. 1002 abstract

Behavior of Rare-Earth Metals in Vacuum Melting and Directional Solidification of Nickel Superalloys

V. V. Sidorov and P. G. Min p. 1006 abstract

Directional Solidification, Structure, and Mechanical Properties of a Eutectic Nb–Si Alloy with a Natural Composite Structure for GTE Blades

Yu. A. Bondarenko, A. B. Echin, M. Yu. Kolodyazhnyi and A. R. Narskii p. 1012 abstract

Simulation of Metallurgical Processes

On the Application of Lithium Additives in the Electrolytic Production of Primary Aluminum

A. V. Saitov, V. Yu. Bazhin and V. G. Povarov p. 1018 abstract

Increasing the Energy Efficiency of the Cyclic Action Mechanisms in Rolling for a Roller Bed Used as an Example

A. N. Andreev and D. A. Kolesnichenko p. 1025 abstract

Manufacture of Special Metal Products

Development and Implementation of the Casting of Rods Made of Refractory Cast Alloys

I. V. Kabanov, S. L. Urin, A. S. Ivanyuk, A. N. Nesterov and S. V. Bogdanov p. 1033 abstract

Experience of Application of EBW in Producing Welded VT41 Alloy Drums in the Design of an HPC in an Advanced Engine

Yu. G. Bykov, E. O. Fomichev, O. S. Kashapov and K. A. Kyaramyan p. 1037 abstract

Special Electrometallurgy

Effect of the Grain Size of the Initial Structure of 1565chM Alloy on the Structure and Properties of the Joints Fabricated by Friction Stir Welding

V. V. Ovchinnikov, A. M. Drits, M. A. Gureeva and D. V. Malov p. 1042 abstract

Hardening and Coating Technologies

Intensity of Exhaustion of the Properties of Protective Coatings during Heat Resistance Tests

B. P. Eliseev, N. V. Nesterov, R. G. Ravilov and V. M. Samoilenko p. 1049 abstract

Effect of Vacuum Carburizing on the Structure and the Properties of Aluminide Coatings on Nickel Superalloys

N. V. Abraimov p. 1052 abstract

Powder Metallurgy Reconditioning of Food and Processing Equipment Components

M. Z. Nafikov, R. S. Aipov and A. Yu. Konnov p. 1057 abstract

Fracture Resistance Factors of Iron-Based Hard Alloys

A. V. Kudrya, E. A. Sokolovskaya and T. Sh. Akhmedova p. 1063 abstract

Control of Technological Processes

Homogenization Processes in Single-Crystal and Granular ZhS32-VI High-Temperature Alloys

M. R. Orlov, N. V. Petrushin, A. G. Evgenov and F. N. Karachevtsev p. 1068 abstract

Metallurgical Equipment

Implementation and Modification of the Manufacture of High-Quality Ingots in an ALD Vacuum Arc Furnace

A. A. Sisev, B. V. Troyanov and A. I. Il’inskii p. 1077 abstract

Resource Saving

Elemental Composition of the Powder Particles Produced by Electric Discharge Dispersion of the Wastes of a VK8 Hard Alloy

R. A. Latypov, E. V. Ageev, G. R. Latypova, A. Yu. Altukhov and E. V. Ageeva p. 1083 abstract

Contents