Contents
Russian Metallurgy (Metally)

Vol. 2010, No. 12

A simultaneous English language translation of this journal is available from Pleiades Publishing, Ltd.
Distributed worldwide by Springer. Russian Metallurgy (Metally) ISSN 0036-0295.

Manufacture of Ferrous and Nonferrous Metals

To the Problem of Steel Desulfurization in a Ladle–Furnace Unit and a Chamber Degasser

V. M. Safonov, A. N. Smirnov, K. E. Pismarev, and D. V. Proskurenko p. 1087  abstract

Metal Desulfurization with Manganese in the Course of Direct Alloying

A. Ya. Nakonechnyi, V. N. Urtsev, R. V. Sinyakov, D. M. Khabibulin,
V. A. Kudrin, and A. V. Shmakov p. 1091  abstract

Effect of the Metal Charge Mass and the Slag Thickness on the Process
of Steelmaking in an Arc Furnace

M. S. Kuznetsov, E. V. Yakushev, S. A. Kulagin, G. I. Kotel’nikov, A. E. Semin,
K. L. Kosyrev, and R. S. Kulish p. 1097  abstract

Effect of the Energy-Technological Parameters on the Technical-and-Economic Indices
of the Operation of DSP-150 Furnaces during Melting of Scrap and Pellets:
I. Operation of Electric Furnaces with a High Efficiency of Arcs during Melting
of Scrap and Pellets

A. N. Makarov, A. Yu. Sokolov, and A. S. Dyundin p. 1101  abstract

Modern Electric Furnace Plant for the Production of a High-Quality Tube Continuous Billet

S. G. Chikalov, V. I. Tazetdinov, A. G. Ryapolov, S. A. Botnikov, and S. V. Solomin p. 1107  abstract

Leaching Kinetics of the Magnetic Fraction of Converter Matte in Sulfuric Acid
and Hydrochloric Acid Solutions

A. A. Palant, V. A. Bryukvin, O. I. Tsibin, and V. M. Paretskii p. 1110  abstract

Special Electrometallurgy

Achieving the Maximum Melting Rate for Various Vacuum Arc Remelting Schemes

A. V. Filimonov and O. Kh. Fatkullin p. 1114  abstract

Possibility of Producing Multilayer Ingots by Electroslag Remelting

I. V. Chumanov and M. A. Porsev p. 1117  abstract

Casting and Solidification of Metal

Increasing the Life of Molds for Casting Copper and Its Alloys

A. N. Smirnov and D. V. Spiridonov p. 1121  abstract

Hardening of the Surface Layers of a Hollow Billet Formed by Centrifugal Casting

V. I. Chumanov, I. V. Chumanov, A. N. Anikeev, and R. R. Garifulin p. 1125  abstract

Manufacture of Hollow Ingots using Centrifugal Casting Machines

A. G. Pomeshchikov, T. S. Greneva, V. I. Baidachenko, and V. I. Berezin p. 1129  abstract

Promising Method of Producing Cast Billets from Superalloys

E. N. Eremin, Yu. O. Filippov, and A. E. Eremin p. 1131  abstract

Electrical, Geometric, and Thermal Parameters of Arcs in Metallic Vapors

A. N. Makarov and A. Yu. Sokolov p. 1136  abstract

Heat Losses and Energy Efficiency of Arc Steel-Melting Furnaces

Yu. M. Mironov and V. G. Petrov p. 1141  abstract

Next-Generation Plasma Shaft Ore Smelting Furnace

V. V. Pavlov, A. G. Pomeshchikov, I. A. Bezrukov, and S. N. Malyshev p.1145  abstract

Manufacture of Ferroalloys

Production and Application of New Complex Boron-Containing Ferroalloys

A. S. Kim, O. V. Zayakin, A. A. Akberdin, and Yu. V. Kontsevoi p. 1148  abstract

Possibility of Joint Manufacture of Ferroalloys and Nonferrous Metals
by an Electrothermal Method

B. A. Kapsalyamov p. 1151  abstract

Theory of Metallurgical Processes

Thermodynamics of Titanium-Based Melts: II. Oxygen in Liquid Titanium

L. N. Belyanchikov p. 1156  abstract

Quality of Metal Products

Effect of the Chemical Composition and Austenitizing Conditions on the Hardenability
of 35GR Steel

A. I. Potapov, I. T. Malikov, V. I. Urazov, and A. E. Semin p. 1164  abstract

Plasma-Pulsed Hardening of Machine Parts and Mechanisms

A. S. An’shakov, V. A. Faleev, and V. S. Cherednichenko p. 1168  abstract

Resource Saving

Improvement of the Processing of the Wastes of Nonferrous Metals
into High-Quality Secondary Raw Materials

E. N. Gordeev, S. V. Sergeev, and I. V. Chumanov p. 1173  abstract

Ecological Aspects of the Production of Recycled Zinc

A. D. Besser and V. M. Paretskii p. 1175  abstract

Energetics of Steelmaking Processes

V. P. Luzgin, K. L. Kosyrev, A. E. Semin, and D. A. Dosmatov p. 1178  abstract

Car Scrap in the Structure of the Russian Metal Stock and Technical Solutions for Its Utilization

A. G. Chizhikov, A. E. Semin, and I. I. Chizhikova p. 1184  abstract

Control of National Economy

Control of Innovation Activity in a Competitive Metallurgical Business

S. V. Bogdanov p. 1189  abstract

Author Index to Volume 2010 1193

Pleiades Publishing home page | journal home page | top

If you have any problems with this server, contact webmaster.