Contents

Russian Metallurgy (Metally)


Vol. 2025, No. 10, 2025


Influence of Mechanical Activation of Titanium-Containing Powders on Physical and Mechanical Properties of Sintered Products

O. V. Romanova, M. N. Zakharov, A. V. Dolmatov, O. A. Korolev, D. I. Kryuchkov, and B. R. Gelchinski p. 1821  abstract

Analysis of Nonmetallic Inclusions in Steel When Cerium Oxide Is Used in Ladle Metallurgy Slags

A. G. Upolovnikova, A. A. Babenko, and A. N. Smetannikov p. 1830  abstract

Scientific Foundations for the Development of Innovative Technological Solutions for Producing Next-Generation Structural Steels with Enhanced Properties

A. A. Babenko, A. G. Upolovnikova, L. Yu. Mikhailova, and A. N. Smetannikov p. 1834  abstract

Effect of Graphene on an Al–Mn Alloy-Based Composite Material: A Raman and X-ray Photoelectron Spectroscopy Study

L. A. Yolshina, V. I. Pryakhina, and V. A. Dorogova p. 1840  abstract

Distillation of Components of the LiCl–KCl–LaCl3–CeCl3–NdCl3–UCl3 Molten Mixtures under Reduced Pressures

A. B. Salyulev, A. R. Mullabaev, V. A. Kovrov, A. Yu. Nikolaev, Yu. P. Zaikov, and Yu. S. Mochalov p. 1849  abstract

Thermodynamic Modeling of the Melting of a Metallized Siderite Concentrate in an Electric Furnace in the Presence of Boron Anhydride

A. S. Vusikhis, K. V. Pikulin, S. N. Tyushnyakov, S. N. Agafonov, L. I. Leont’yev, and G. V. Belov p. 1860  abstract

Ultrasonic Velocity and Adiabatic Compressibility in Pb–Sn Melts

A. V. Borisenko, D. A. Yagodin, and V. V. Filippov p. 1867  abstract

Phase Equilibria in the Quasi-Binary FLiNaK–La2O3 System

I. V. Korzun and I. D. Zakir’yanova p. 1872  abstract

Thermodynamic Perturbation Theory for Taking into Account Dipole–Dipole Interactions to Describe the Densities of Molten Alkali Metal Halides

A. G. Davydov and V. A. Elterman p. 1879  abstract

Calculation of the Densities of Molten Alkaline Earth Metal Halides with Allowance for the Interionic Charge–Dipole Interactions in the Melts

A. G. Davydov and V. A. Elterman p. 1885  abstract

Conductivity of the Chloroaluminate Melt Based on Triethylamine Hydrochloride

V. A. Elterman and A. V. Borozdin p. 1891  abstract

Equilibrium Potentials of Palladium in the Mixture of Potassium and Lead Chlorides

P. A. Arkhipov, Yu. R. Khalimullina, S. P. Arkhipov, A. R. Mullabaev, and Yu. P. Zaikov p. 1897  abstract

Electrical Resistivity of Equiatomic High-Entropy CoCrFeNi Alloy at High Temperatures

V. A. Bykov, D. A. Yagodin, T. V. Kulikova, and K. Yu. Shunayev p. 1902  abstract

Production of Mo–Ni Coatings by Melt Electrolysis NaCl–KCl–MoCl3–NiCl2

A. A. Chernyshev, A. V. Isakov, A. P. Apisarov, L. M. Minchenko, and S. P. Arkhipov p. 1906  abstract

Effect of Mixed β, γ Irradiation on the Pitting Corrosion of AISI 316L Steel in Artificial Seawater at Various Chloride Ion Concentrations. Part 1: Testing at 25°C

Yu. V. Lapin, O. A. Golosov, S. S. Khvostov, and O. I. Rebrin p. 1915  abstract

Carbothermic Reduction for the Quantitative Determination of the Oxygen Content in Various Materials (Review)

A. A. Maslennikova, O. Yu. Tkacheva, and Yu. P. Zaikov p. 1924  abstract

Amorphous High-Entropy Alloys as Innovative Materials for Hydrogen Energy: State of the Art and Development Prospects

V. A. Polukhin and S. Kh. Estemirova p. 1932  abstract

Influence of the Salt-Solvent Composition on the Thermodynamic Characteristics of the U–Ga Alloy in the Liquid Metal–Molten Salt System

A. V. Novoselova and V. V. Smolenski p. 1953  abstract

Development and Production of a Cast Al–Cu–Fe–Zn Alloy

M. V. Kiselev, T. V. Osinkina, K. Yu. Pashkeev, K. G. Rybalchenko, and K. I. Oleinik p. 1958  abstract

Thermodynamic Modeling of the Decomposition of Ilmenite in Neutral and Oxidizing Atmospheres

V. A. Salina, N. I. Il’inykh, and B. R. Gel’chinskii p. 1966  abstract

Synthesis of Nickel Silicides during Electrolysis of the KCl–K2SiF6 Melt

E. A. Koryakin, T. A. Gevel, A. V. Suzdal’tsev, and Yu. P. Zaikov p. 1973  abstract

Influence of the Shape of the Gas Swirler Channels in a Plasma-Forming Gas Supply System on the Parameters of a Plasma Jet

R. A. Okulov and V. A. Krashaninin p. 1980  abstract

Oxidation of Uranium Mononitride by (Ar + O2) Mixtures. Thermodynamic Modeling and Kinetics

M. V. Mazannikov, A. M. Potapov, and Yu. P. Zaikov p. 1987  abstract

Corrosion Behavior of Austenitic Steels and an Iron–Nickel 06KhN28MDT Alloy in Uranium-Containing Fluoride Melts

A. I. Trubcheninova, A. V. Abramov, R. R. Alimgulov, I. B. Polovov, D. A. Zolotarev, V. I. Markelov, and A. I. Girev p. 1995  abstract

Corrosion Resistance of Thermal Spray Coatings in an FLiNaK Melt

R. R. Alimgulov, I. E. Kuklin, A. V. Abramov, N. R. Barashev, I. B. Polovov, D. A. Zolotarev, E. A. Bel’tyukov, N. A. Khlebnikov, and A. D. Mukhamed’yanov p. 2003  abstract

Corrosion Resistance of Protective Coatings on 12Kh18N10T Steel in an FLiBe Melt

K. E. Seliverstov, E. A. Karfidov, E. V. Nikitina, A. E. Dedyukhin, and Yu. P. Zaikov p. 2014  abstract

Dynamic Corrosion Tests of 12Kh18N10T in the LiCl–2 wt % Li2O Melt at 650°C

E. A. Karfidov, K. E. Seliverstov, I. D. Filippov, E. V. Nikitina, A. E. Dedyukhin, and Yu. P. Zaikov p. 2021  abstract

Effect of Chromium Doping on the Structure and Properties of Ba0.5Sr0.5Fe12 – xCrxO19 Hexaferrites

D. P. Sherstyuk, A. R. Zykova, A. I. Kovalev, V. E. Zhivulin, and D. A. Vinnik p. 2029  abstract

Transport Numbers of Ions in the Low-Temperature Aluminum Chloride–Triethylamine Hydrochloride Ionic Liquid

V. A. Elterman, A. V. Borozdin, and L. A. Yolshina p. 2036  abstract

Cathodic Protection of the Steel Structures in the Water Treatment Line of a Combined Heat and Power Plant

O. A. Nevolina and N. G. Rossina p. 2043  abstract