Vol. 2020, No. 10, 2020

Russian Metallurgy (Metally)

Physical Foundations of Strength and Plasticity

Plasticity of Metals and Mendeleev’s Periodic Law

L. B. Zuev, S. A. Barannikova and V. I. Danilov p. 1039 abstract

Hysteresis of the Grain-Boundary Mobility of the [1010] Tilt Boundaries in Zinc

V. G. Sursaeva p. 1045 abstract

Hysteresis of the Grain-Boundary Mobility during Grain-Boundary Phase Transitions

V. G. Sursaeva and A. S. Gornakova p. 1050 abstract

Effect of Grain-Boundary Segregation on the Diffusion of Atoms in Grain Boundaries in Copper-Based Systems

V. V. Kulagin, A. A. Itskovich, A. O. Rodin and B. S. Bokshtein p. 1055 abstract

Deformation and Fracture Mechanics

Fracture Criterion and the Life of Materials during Brittle Fracture

V. V. Shevelev p. 1060 abstract

Elastoplastic State of Stress of a Plate with a Crack

I. A. Vasil’ev and S. A. Sokolov p. 1065 abstract

Calculation of the Aeroelastic Characteristics of a Wing during Vibrations in a Subsonic Flow by the Discrete Singularity Method

V. V. Ovchinnikov, Yu. V. Petrov and S. V. Filimonov p. 1070 abstract

Deformation and Long-Term Strength of a Thick-Walled Tube of a Physically Non-Linear Viscoelastic Material under Constant Pressure

A. V. Khokhlov p. 1079 abstract

Advanced Materials and Technologies

Climatic Aging of Aviation Polymer Composite Materials: II. Development of Methods for Studying the Early Stages of Aging

E. N. Kablov and V. O. Startsev p. 1088 abstract

Effect of the Production Conditions on the Structure and Strength of the AMg6 Alloy–12Kh18N10T Steel Bimetallic Joint

D. N. Makhina, S. A. Nikulin, V. N. Denisov and A. S. Klyatskin p. 1095 abstract

Mechanism and Kinetics of the Hydrogen Failure of Thermoelectric Materials during Water Electrolysis

M. A. Korzhuev, I. V. Katin, M. A. Kretova and E. S. Avilov p. 1102 abstract

Effect of the Size Factor on the Strength and Plastic Properties, the Shape Memory Effect, and the Superelasticity of TiNi-Based Thin Filaments

A. N. Monogenov, V. E. Gyunter, S. G. Anikeev, E. S. Marchenko, V. N. Khodorenko and M. Yu. Fatyushin p. 1116 abstract

Effect of Alloying on the Volume Effect of the γ → α Transformation in High-Nitrogen Steels

I. O. Bannykh, S. Ya. Betsofen, I. A. Grushin and O. P. Chernogorova p. 1122 abstract

Phase Composition and Residual Stresses in the Surface Layers of VNS9-Sh TRIP Steel

S. Ya. Betsofen, A. A. Ashmarin, V. F. Terent’ev, I. A. Grushin and M. A. Lebedev p. 1129 abstract

Structure and Tribological Properties of the AO20-1 Alloy–Ti₂NbAl Intermetallic Compound Composite Material

L. I. Kobeleva, I. E. Kalashnikov, P. A. Bykov, A. G. Kolmakov and I. V. Katin p. 1137 abstract

Structure and Properties of the Deformed State

Acoustic and X-ray Diffraction Texture Parameters and the Elastic Constants of Low-Carbon Steel before and after Fatigue Tests

V. N. Serebryanyi, V. V. Mishakin and A. V. Gonchar p. 1142 abstract

Rheological Behavior of a VT23 Alloy during Deformation in a Wide Temperature Range

S. V. Gladkovskii, V. P. Volkov, D. R. Salikhyanov, V. E. Veselova and A. M. Patselov p. 1147 abstract

Strain-Induced Lattice Distortions of a Hydrogenated Palladium-Based Alloy

O. V. Akimova, A. A. Veligzhanin, R. D. Svetogorov, S. V. Gorbunov, N. R. Roshan and G. S. Burkhanov p. 1151 abstract

Applied Problems of Strength and Plasticity

Effect of High Temperatures on the Mechanical Properties of Grade 22K Steel

S. A. Nikulin, S. O. Rogachev, S. G. Vasil’ev, V. A. Belov, V. Yu. Turilina and Yu. A. Nikolaev p. 1157 abstract

Degradation and Failure of Pipes from an Oil-and-Gas Pipeline in Media with a High Content of Carbon Dioxide and Chlorine Ions

M. A. Vyboishchik, A. V. Ioffe, T. V. Tetyueva, V. A. Revyakin and I. V. Gruzkov p. 1162 abstract

Corrosion-Mechanical Failure of the Fittings of Pipeline Systems in Deposits with a High CO₂ Content

M. A. Vyboishchik, A. V. Ioffe, D. V. Kudashov, A. V. Fedotova and Yu. V. Mironova p. 1171 abstract

Effect of a Fluid on the Deformation Behavior of Human Dentin during Diametral Compression

A. V. Kabanova, D. V. Zaitsev, S. S. Grigor’ev and P. E. Panfilov p. 1177 abstract

Thermal and Thermooxidative Degradation of Blends Based on Polylactide and Polyethylene

M. V. Podzorova and Yu. V. Tertyshnaya p. 1182 abstract

Diagnostics and Mechanical Test Techniques

Correlation between the Mechanical Properties and the Strain-Induced Martensite Content Found by Various Techniques in an Austenitic–Martensitic TRIP Sheet Steel

V. F. Terent’ev, E. A. Eliseev, M. Yu. Yazvitskii, V. P. Sirotinkin, A. Yu. Marchenkov and V. I. Gromov p. 1186 abstract

Dynamics of Extended Pipeline Failure

M. A. Shtremel’, A. B. Arabei, A. G. Glebov, A. I. Abakumov, T. S. Esiev and I. Yu. Pyshmintsev p. 1191 abstract

Effect of Electrolytic-Plasma Polishing on the Mechanical Properties of Austenitic–Martensitic VNS9-Sh TRIP Steel

V. F. Terent’ev, A. K. Slizov, A. M. Smyslov, D. R. Tamindarov, D. V. Prosvirnin, A. G. Penkin, L. P. Shiryaev and V. P. Sirotinkin p. 1199 abstract

Digital Image Correlation Method Study of the Static Fracture Toughness and the Fracture Strength of a Thin-Sheet Aluminum Alloy

V. V. Avtaev and N. O. Yakovlev p. 1207 abstract

Effect of the Technological State of the Material of the Structural Elements of Fuel Tanks Made of AMg6 Alloy on the Acoustic Emission Parameters

M. R. Tyutin, V. G. Budueva and G. G. Alekseev p. 1213 abstract

Plastic Deformation Zone Size during Indenter Scratch Tests of Materials

A. Yu. Marchenkov, D. V. Chernov, D. A. Zhgut, E. V. Terent’ev and N. Abusaif p. 1218 abstract

Experimental Determination of the Rate of Crack Branching in Steel

A. A. Alekseev, K. N. Bol’shev, V. A. Ivanov, A. S. Syromyatnikova, A. M. Bol’shakov and A. R. Ivanov p. 1222 abstract

Effect of the Strain Rate on the Mechanical Properties of Austenitic–Martensitic TRIP Sheet Steel with Low Martensite Content

V. F. Terent’ev, O. V. Rybal’chenko, A. S. Baikin, M. A. Kaplan, V. P. Sirotinkin and L. I. Kobeleva p. 1225 abstract

Phenomenon of Spall Fracture during Tension

A. V. Grinevich, A. V. Slavin, N. O. Yakovlev and I. V. Gulina p. 1230 abstract

Fracture of a Main Pipeline 530 mm in Diameter Made of Low-Alloy 17GS Steel

V. M. Goritskii, G. R. Shneiderov and M. A. Lushkin p. 1235 abstract