Vol. 2019, No. 10, 2019

Russian Metallurgy (Metally)

Physical Foundations of Strength and Plasticity

Molecular Dynamics Study of the Point Defect Migration in the Ordered CuPt Alloy during Deformation

G. M. Poletaev, M. D. Starostenkov, I. V. Zorya and M. A. Il’ina p. 927 abstract

Formation of Z-Phase Particles in a Martensitic 9% Cr Steel during Creep at 650°C and Their Influence on the Creep

A. E. Fedoseeva, I. S. Nikitin, N. R. Dudova and R. O. Kaibyshev p. 932 abstract

Stratification Effect in Melt-Spun Fe–B and Fe–Cr–B Alloy Ribbons

A. M. Frolov, G. S. Krainova, S. V. Dolzhikov and V. V. Tkachev p. 939 abstract

Evolution of the Multiscale Hierarchical Structure of Defects in a Melt-Quenched Fe₇₀Cr₁₅B₁₅(Sn) Alloy during Low-Temperature Annealing

T. A. Pisarenko, A. M. Frolov and G. S. Krainova p. 943 abstract

Deformation and Fracture Mechanics

Simulation of the Grain Refinement in Metals during Superplastic Deformation

I. A. Goncharov p. 948 abstract

Possibility to Describe the Alternating and Nonmonotonic Time Dependence of Poisson’s Ratio during Creep Using a Nonlinear Maxwell-Type Viscoelastoplasticity Model

A. V. Khokhlov p. 956 abstract

Prediction of a Crack Growth Trajectory with Allowance for the Angular Distribution of the Small Components of the Tangential Stresses at a Crack Tip

A. M. Bol’shakov and L. A. Prokop’ev p. 964 abstract

Cross Hardening of a Shape Memory Alloy during Compression

A. A. Movchan, S. A. Kazarina and A. L. Sil’chenko p. 967 abstract

Estimation of the Local State of Stress and Strains in Stress Concentration Zones in a Wide Strain Range

N. A. Makhutov and D. O. Reznikov p. 974 abstract

Advanced Materials and Technologies

Wear Resistance of the Surface Layers in Silumin after Electron-Beam Treatment

D. V. Zagulyaev, V. E. Gromov, S. V. Konovalov, A. M. Glezer, S. V. Panin and Yu. F. Ivanov p. 981 abstract

Effect of Thermohydrogen Treatment on the Manufacturing and Mechanical Properties of a Heat-Resistant VTI-4 Intermetallic Alloy

S. V. Skvortsova, O. Z. Pozhoga, A. V. Ovchinnikov and A. A. Orlov p. 986 abstract

Amorphous-Alloy-Based Composites Prepared by High-Pressure Torsion

I. E. Permyakova, E. N. Blinova, I. V. Shchetinin and E. S. Savchenko p. 994 abstract

Fabrication, Structure, and Mechanical Properties of Composite Oxide Fibers for Brittle-Matrix Composites

V. M. Kiiko, A. A. Kolchin and N. I. Novokhatskaya p. 1002 abstract

Effect of the Thermomechanical Compacting Conditions on the Electrical Conductivity of an Al₂O₃/Graphene Composite Material

A. G. Zholnin, A. V. Tenishev and V. V. Stolyarov p. 1009 abstract

Possibilities of Ultrasonic Initiation of the Operation of TiNi Alloy Ring-Shaped Force Elements

N. V. Chernyavskaya, G. A. Volkov and E. A. Khlopkov p. 1015 abstract

Structure and High-Temperature Mechanical Properties of High-Carbon Niobium-Based Alloys

M. I. Karpov, D. V. Prokhorov, V. I. Vnukov, T. S. Stroganova, B. A. Gnesin, I. B. Gnesin, I. S. Zheltyakova and I. L. Svetlov p. 1018 abstract

Structure and Mechanical Properties of the Layered Composites Made of Multicomponent Niobium Alloys and Hardening Silicon–Carbon Compounds Formed by Solid-Phase Sintering

V. P. Korzhov, V. M. Kiiko and I. S. Zheltyakova p. 1024 abstract

Structure and Mechanical Properties of the Molybdenum–Steel Bimetal Fabricated by Hot Isostatic Pressing

D. N. Makhina, V. N. Denisov, Yu. S. Perminova, V. N. Butrim and S. A. Nikulin p. 1031 abstract

Structure and Electroerosion Resistance of the Ag–CuO Coating Prepared by Electroexplosive Sputtering on Copper Electrical Contacts

D. A. Romanov, S. V. Moskovskii, V. E. Gromov, K. V. Sosnin and A. D. Filyakov p. 1036 abstract

Structure and Properties of the Deformed State

On the Use of Atomic Force Microscopy in Metallography

G. V. Shlyakhova, S. A. Barannikova and L. B. Zuev p. 1040 abstract

Effect of Severe Plastic Deformation on the Acoustic Emission and the Thermal Effects in Titanium Nickelide

N. N. Belousov, V. A. Andreev, E. V. Chernyaeva, A. E. Volkov and Yu. N. V’yunenko p. 1045 abstract

Effect of the Fractionality and Direction of Severe Plastic Deformation on the Structure and Properties of Commercial-Purity Titanium

N. A. Shurygina, A. M. Glezer, D. L. D’yakonov, A. D. Medvedeva, A. A. Tomchuk and T. V. Rassadina p. 1051 abstract

Change in the Mechanical Properties of Commercial-Purity Copper during Alternating Elastoplastic Deformation

V. M. Matyunin, A. Yu. Marchenkov, A. E. Shelest, V. S. Yusupov and M. M. Perkas p. 1057 abstract

Applied Problems of Strength and Plasticity

Effect of a Welding Method on the Fatigue Strength and Fracture of Foam–Aluminum Sandwiches

O. S. Shapovalov, G. E. Kodzhaspirov, K. Hantelmann and V. G. Mikhailov p. 1063 abstract

Failure of Pump–Compressor Pipes in Highly Aggressive Oil-Field Media

M. A. Vyboishchik, A. V. Ioffe and A. O. Zyryanov p. 1067 abstract

Development of Structural Damage and Cracking in a Landing Head during Long-Term Operation under North Conditions

V. M. Goritskii, E. L. Muravin and G. R. Shneiderov p. 1074 abstract

Application of Local Strengthening for Increasing the Strength of the Welded Joint of EP517 Steel and 36NKhTYu Alloy

E. V. Terent’ev, A. Yu. Marchenkov, A. L. Goncharov and A. P. Sliva p. 1085 abstract

Effect of the Martensite Content on the Mechanical Behavior and the Acoustic Emission Characteristics of a Sheet TRIP Steel during Static Tension

V. F. Teren’tev, V. V. Roshchupkin, A. G. Penkin and M. A. Penkin p. 1091 abstract

Effect of Alloying Elements on the Hardening of Die Steels in the Austenitic State during High-Temperature Plastic Deformation

A. A. Kruglyakov p. 1096 abstract

Fabrication of a High-Density Compacted Material from a Coarse-Grained Silicon Carbide Powder by Magnetic Pulsed Pressing Combined with Spark Plasma Sintering

D. P. Shornikov, A. V. Tenishev, V. N. Kazakova and A. G. Zholnin p. 1102 abstract

Properties of Longitudinal Welded Steel Pipes for Piled Foundations Built under Cryolithic Zone Conditions

P. D. Odesskii, Ya. V. Vershinin, A. G. Alekseev and A. A. Zvezdov p. 1107 abstract

Creep of Tubes under External Pressure

E. E. Vorob’ev, M. M. Peregud, T. N. Khokhunova, O. Yu. Mileshkina, S. A. Bekrenev, V. A. Markelov and M. A. Shtremel’ p. 1112 abstract

Diagnostics and Mechanical Test Techniques

Method for Estimating the Limiting State of the Pipes of Gas Mains Having Operated for a Long Time

A. V. Burnashev and A. M. Bol’shakov p. 1125 abstract

Steels with Yield Strength Higher than 700 MPa for Metallic Structures and the Strength of Their Welded Joints

P. D. Odesskii and S. V. Gurov p. 1128 abstract

Elastic Hysteretic Properties of Damping Composite Materials for Rail Transport at Low Temperatures under Static and Dynamic Loading

E. G. Kurzina, A. G. Kolmakov, Yu. N. Aksenov, A. M. Kurzina, A. Yu. Bogachev and A. V. Semak p. 1138 abstract

Causes and Mechanisms of Fracture of a Main Line Section Made of 17G1S Steel

V. M. Goritskii, G. R. Shneiderov and A. A. Durneva p. 1143 abstract