Vol. 2017, No. 10, 2017

Russian Metallurgy (Metally)

A simultaneous English language translation of this journal is available from Pleiades Publishing, Ltd.
Distributed worldwide by Springer. Russian Metallurgy (Metally) ISSN 0036-0295.

Physical Foundations of Strength and Plasticity

Relaxation of the Elastic Field of a Crystal during the Subgrain Boundary Formation Induced by Plastic Deformation

G. F. Sarafanov and V. N. Perevezentsev p. 775 abstract

Deformation and Fracture Mechanics

Experimental Study and Theoretical Simulation of the Cross Hardening Effect in Shape Memory Alloys

A. A. Movchan, A. L. Sil’chenko and S. A. Kazarina p. 779 abstract

Advanced Materials and Technologies

Effect of the Mechanical Activation of a Cathode on the Structure of Electrolytic Copper Single Crystals

N. N. Gryzunova, A. A. Vikarchuk, A. M. Gryzunov and A. G. Denisova p. 785 abstract

Effect of Dynamical Chemical Etching on the Porous Structure Parameters of Superelastic Medical Ti–Nb–Zr Alloy Foam

V. A. Sheremetyev, S. M. Dubinskiy, M. A. Ikbal’, A. A. Korobkova, A. M. Kazakbiev, S. D. Prokoshkin and V. Brailovski p. 789 abstract

Shape Memory Effect in a Rapidly Quenched Ti₅₀Ni₂₅Cu₂₅ Alloy

N. N. Sitnikov, A. V. Shelyakov, I. A. Khabibullina and R. V. Sundeev p. 794 abstract

Structure and Magnetic Properties of the Nd_9.5Fe_84.5B₆ Alloy Subjected to Severe Plastic Deformation and Annealing

V. P. Menushenkov, I. V. Shchetinin, S. V. Chernykh, A. G. Savchenko, M. V. Gorshenkov and D. G. Zhukov p. 801 abstract

Effect of the Milling Time on the Magnetic Properties of Powder Compositions of the Sm₂Fe₁₇N_x Intermetallic Compound and an Nd–Fe–B Alloy

A. G. Savchenko, V. P. Menushenkov, A. Yu. Plastinin, I. V. Shchetinin, I. G. Bordyuzhin, V. A. Ryazantsev, V. N. Verbetskii and E. A. Movlaev p. 807 abstract

Structure and Properties of the Deformed State

Methodological Aspects of the Quantitative Texture Analysis of HCP Alloy (Ti, Zr) Sheet Semiproducts

D. A. Dzunovich, S. Ya. Betsofen and P. V. Panin p. 813 abstract

Role of Crushing-Induced Fragmentation in the Consolidation of Quartz Ceramic and Glass Powders during High-Pressure Torsion

B. A. Greenberg, M. A. Ivanov, V. P. Pilyugin, A. M. Patselov and T. P. Tolmachev p. 821 abstract

Phase Composition, Texture, and Anisotropy of the Properties of Al–Cu–Li–Mg Alloy Sheets

S. Ya. Betsofen, V. V. Antipov, N. Yu. Serebrennikova, M. I. Dolgova and Yu. A. Kabanova p. 831 abstract

Anisotropy of the Effective Elastic Modulus of a Steel Plate with a Lattice of Circular Holes

R. V. Gol’dshtein, V. V. Mokryakov, A. V. Chentsov, V. N. Petrovskii, A. O. Andreev, A. M. Glezer and M. A. Libman p. 838 abstract

Shear Bands and Anisotropy of the Mechanical Properties of an MA2-1pch Magnesium Alloy after Equal-Channel Angular Pressing

V. N. Serebryany, M. A. Khar’kova, G. S. D’yakonov, V. I. Kopylov and S. V. Dobatkin p. 842 abstract

Effect of High-Rate Deformation on the Structure, the Properties, and the Thermal Stability of Copper Alloyed with Chromium and Zirconium

I. V. Khomskaya, V. I. Zel’dovich, E. V. Shorokhov, N. Yu. Frolova, A. E. Kheifets and V. P. Dyakina p. 851 abstract

Effect of Chromium on the Structure Evolution in Single-Phase Ni–Cr Alloys during High-Pressure Torsion

Yu. G. Krasnoperova, M. V. Degtyarev, T. I. Chashchukhina and L. M. Voronova p. 858 abstract

Applied Problems of Strength and Plasticity

Estimation of the Notch Sensitivity of a Nitrided Steel by Acoustic Emission

S. O. Rogachev, S. A. Nikulin, V. M. Khatkevich, D. Yu. Ozherelkov and A. V. Molyarov p. 862 abstract

Influence of the Tempering Temperature on the Mechanical Properties and the Phase Composition of Thin Sheet TRIP Steel

V. F. Terent’ev, E. A. Eliseev, V. M. Matyunin, A. K. Slizov, A. Yu. Marchenkov, V. P. Sirotinkin, A. S. Baikin and G. S. Seval’nev p. 867 abstract

Evolution of the Structure and the Phase Composition of a Bainitic Structural Steel during Plastic Deformation

E. N. Nikitina, A. M. Glezer, Yu. F. Ivanov, K. V. Aksenova, V. E. Gromov and S. A. Kazimirov p. 871 abstract

Fracture Toughness of As-Cast Freight Bogie Solebars after Volume–Surface Quenching

V. A. Belov, A. V. Nikitin, V. I. Anikeenko, A. A. Armizonov and S. O. Rogachev p. 874 abstract

Fracture Mechanism of Coronal Teenage Dentin

P. E. Panfilov, A. V. Kabanova, I. N. Borodin, J. Guo and Z. Zang p. 879 abstract

Adhesion Energy in the Metal/Oxide System for the Case of High-Temperature Oxidation of Nickel-Based Superalloys

V. V. Moskvichev, N. V. Sukhodoeva, E. N. Fedorova and A. S. Popov p. 884 abstract

Mechanical and Functional Properties of Commercial Alloy TN-1 Semiproducts Fabricated by Warm Rotary Forging and ECAP

V. A. Andreev, V. S. Yusupov, M. M. Perkas, V. V. Prosvirnin, A. E. Shelest, S. D. Prokoshkin, I. Yu. Khmelevskaya, A. V. Korotitskii, S. A. Bondareva and R. D. Karelin p. 890 abstract

Diagnostics and Mechanical Test Techniques

Analysis of the Fracture Kinetics and Mechanisms of 20GL Steel Having Different Strengths Using the Acoustic Emission Parameters

S. A. Nikulin, V. G. Khanzhin, A. V. Nikitin, V. Yu. Turilina and V. I. Zabolotnikova p. 895 abstract

Improved Method for Determining the Stress Relaxation at the Crack Tip

A. V. Grinevich, V. S. Erasov and V. V. Avtaev p. 901 abstract