Vol. 45, No. 9, 2025

Russian Engineering Research

Improved Reliability of Governor Drive in Diesel Engines

A. B. Matisen, E. I. Khokhlov, and A. A. Varshavskiy p. 1201 abstract

Digital Design of an Unmanned Aerial Vehicle for Agricultural Monitoring

S. I. Antsiferov, E. A. Sychev, A. V. Karachevtseva, A. S. Bocharnikova, D. V. Karpachev, and M. G. Matusov p. 1205 abstract

Parameter Selection for Optimal Deployment Control of an Aerodynamic Tether System in the Atmosphere

Akalu Y. Aynwaga and D. V. Elenev p. 1211 abstract

Interpretation of Force and Geometric Parameters of Friction Drives

A. S. Luk’yanov, Yu. I. Brovkina, A. I. Starikov, and N. A. Dmitriev p. 1218 abstract

Adjustment Mechanisms of Pulse Variators

A. Ya. Ryzvanovich, V. V. Kapralov, and V. A. Generalov p. 1226 abstract

Assessing the Reliability of Systems Described by the Load–Strength Model

M. I. Lomakin, A. V. Dokukin, and I. Yu. Oltyan p. 1229 abstract

Assessment of the Hardness of Hardened Mass-Produced Plow Blades by Lemken

I. N. Kravchenko, S. A. Fes’kov, S. M. Sychev, Yu. A. Kuznetsov, and D. A. Pupkova p. 1233 abstract

Lubricant-Based Monitoring of the Centrifugal Compressor Bearings in a Gas Pumping System

O. Yu. Elagina, K. V. Nakonechnaya, E. A. Prokopenkov, O. M. Saubanov, A. S. Skutkov, and M. S. Ignatov p. 1238 abstract

Design Features of New Camshaft

F. G. Amirov, V. A. Abbasov, A. F. Kerimov, and V. H. Rzayeva p. 1244 abstract

Tribological Properties of Aluminum Matrix Alloys

A. D. Romanov, E. A. Romanova, A. A. Mironov, V. A. Kikeev, and V. S. Makarov p. 1248 abstract

Extending the Life of the Cylinder–Piston Group in Diesel Engines

N. K. Sanaev, M. U. Ahmedpashaev, A. Yu. Alimov, and M. M. Magomedsaedov p. 1253 abstract

Extrusion of a Square Rod from a Cylindrical Workpiece: Formulating the Problem

A. L. Vorontsov and S. M. Karpov p. 1256 abstract

Tribological Properties of Hard Alloy End Mills with Wear-Resistant Coatings

S. A. Plotnikov and A. S. Kluonis p. 1261 abstract

Method to Increase the Internal Energy of the Working Fluid in a Diesel Engine

S. A. Kargin and A. P. Isaev p. 1264 abstract

Predicting the Testing Time in the Design of Industrial Equipment

I. N. Omel’chenko and A. A. Lenkin p. 1271 abstract

Effects of Elastic-Thermodynamic Features of the Cutting Process on Regenerative Chatter of the Tip of the Cutting Tool when Turning Metals

V. P. Lapshin, I. A. Turkin, N. N. Zhdan, and N. A. Silin p. 1275 abstract

Design of a Pressurized Tank for Silanol Crosslinking of Polyethylene in Cable Production

S. A. Efanov and S. I. Boriskin p. 1282 abstract

Electron Beam 3D Printing of Metallic Parts with Adaptive Wire Supply

D. N. Trushnikov, S. V. Varushkin, I. I. Bezukladnikov, I. S. Khomutinin, V. Ya. Belen’kii, and D. A. Repin p. 1285 abstract

Improving Wire Supply for Electron Beam Additive Surfacing

E. A. Fokeev, S. V. Varushkin, I. I. Bezukladnikov, V. Ya. Belen’kii, A. A. Yuzhakov, and D. N. Trushnikov p. 1288 abstract

System for Laser Additive Surfacing by a Rotating Beam

I. I. Bezukladnikov, D. N. Trushnikov, S. V. Varushkin, V. Ya. Belen’kii, and A. M. Moreva p. 1290 abstract

Comparison of Weld Characteristics

V. V. Sirota, S. V. Zaitsev, A. S. Churikov, D. S. Prokhorenkov, D. S. Podgornyi, D. N. Perelygin, A. V. Konnov, and E. P. Dan’shina p. 1292 abstract

Influence of Reciprocating Wire Supply in the Plasma Surfacing of Aluminum on Weld Bead Geometry

I. P. Ovchinnikov, Yu. D. Shchitsyn, T. V. Ol’shanskaya, V. Ya. Belen’kii, A. S. Pan’kov, and R. P. Davlyatshin p. 1296 abstract

Powder Plasma Surfacing for Additive Production of Heat-Resistant Nickel Alloy Workpieces

T. V. Ol’shanskaya, I. A. Mosyagin, I. A. Logachev, I. S. Khomutinin, and G. A. Batrov p. 1301 abstract

The Design Process in Terms of the Key Features and Critical Elements of the Product

I. A. Belyaeva, V. N. Kozlovskiy, A. V. Gusev, and A. V. Fedorov p. 1305 abstract

Structuring the Key Features of a New Product Project during the Design Process

I. A. Belyaeva, V. N. Kozlovskiy, A. P. Novikova, and E. V. Strizhakova p. 1309 abstract

Design of Die Tooling, Taking into Account the Production of Electric Vehicle Components

I. A. Belyaeva, V. N. Kozlovskiy, D. I. Panyukov, and D. A. Demoretskiy p. 1314 abstract

Detecting Anomalous Data in the Marketing of Automobile Brands

V. A. Deryugina, V. G. Mosin, V. N. Kozlovskii, and U. V. Brachunova p. 1318 abstract

Methodology for Evaluating and Selecting Suppliers for Outsourcing in the Construction Sector

D. I. Panyukov, V. N. Kozlovskii, D. A. Gusev, and I. I. Khabibulin p. 1322 abstract

Contents

Russian Engineering Research