Contents

Russian Engineering Research

---

Vol. 38, No. 9, 2018

A simultaneous English language translation of this journal is available from Pleiades Publishing, Ltd.
Distributed worldwide by Springer. Russian Engineering Research ISSN 1068-798X.

---

Influence of Vibrational Loads on Needle Skew in Cardan-Joint Bearings

S. P. Eresko, T. T. Eresko, E. V. Kukushkin and V. A. Menovshchikov p. 651  abstract

Robot Positioning in Assembly and Installation

R. Kh. Akhatov, K. A. Odnokurtsev and E. V. Zykova p. 656  abstract

Improving the Reliability of Large High-Speed Systems

E. V. Shalobaev and A. S. Demina p. 662  abstract

Blanks for Bronze-Coated Frictional Disks Used in Vehicle Transmissions

Yu. I. Krykhtin and V. I. Karlov p. 666  abstract

Assessing the Manufacturability of Product Designs

B. M. Bazrov p. 672  abstract

Drone-Based Autonomous Robot Diagnostic System for Gas and Oil Pipelines in the Arctic and Far North

Yu. G. Kabaldin, D. A. Shatagin, A. V. Kiselev, M. V. Zhelonkin and A. A. Golovin p. 677  abstract

Diffusional Boriding of Subeutectoidal Tool Steels: Technology and Outcome

V. N. Gadalov, S. G. Emel’yanov, E. A. Filatov, I. A. Makarova and V. G. Sal’nikov p. 680  abstract

Electron-Beam Melting in the Manufacture of Gas-Turbine Components

A. Yu. Albagachiev, A. S. Krasko, N. S. Baranova, E. S. Stramtsova and A. A. Mokanu p. 687  abstract

Theory of Intermittent Cutting. 5. Description of Tool Entry in the Blank

A. N. Bol’shakov p. 690  abstract

Cutting Methods for Thick Titanium-Alloy Slabs

S. N. Polyanskii, S. V. Butakov, L. V. Mal’tsev, I. S. Ol’kov, M. A. Popov and V. A. Aleksandrov p. 694  abstract

Diagnostics of Rotary Equipment by Means of Entropic Indices Based on Electrical Signals

A. V. Chernov, E. A. Abidova and L. S. Khegai p. 699  abstract

Dynamics of Synchronous Hydromechanical Drive in Mobile Machine

A. T. Rybak, A. R. Temirkanov and O. V. Lyakhnitskaya p. 702  abstract

Dynamic Optimization of Switched-Reluctance Motors

A. D. Petrushin and A. V. Kashuba p. 705  abstract

Modeling of Tool Wear: Irreversible Energy Transformations

V. L. Zakovorotny, V. P. Lapshin and T. S. Babenko p. 707  abstract

Undulatory Diamond Smoothing of Machine-Part Surfaces

V. I. Butenko and A. D. Kulinskii p. 709  abstract

Research Methodology for Grinding Systems

V. P. Larshin and N. V. Lishchenko p. 712  abstract

Machining by End Mills with Overlapping Cutter–Workpiece Contacts

A. A. Gubanova p. 714  abstract

Model of Tool Wear in Deep Drilling

A. D. Lukyanov, M. S. Minkin and T. S. Onoiko p. 717  abstract

Precision of Long Thin-Walled Axisymmetric Parts in Cutting and Pressure Treatment

I. A. Matveev and A. S. Yamnikov p. 719  abstract

Dynamic Control of Cutting in Terms of Elastoviscous Perturbations

B. M. Brzhozovskii, M. B. Brovkova and I. N. Yankin p. 721  abstract

Dynamic Influence of Spindle Wobble in a Lathe on the Workpiece Geometry

V. L. Zakovorotny and V. E. Gvindzhiliya p. 723  abstract

Optimization of Dynamic Surface Plastic Deformation in Machining

M. A. Tamarkin, E. E. Tishchenko and A. S. Shvedova p. 726  abstract

Influence of the Vapor Channel in Deep Laser Welding

A. Kh. Kharakhashev, M. M. Klimov and V. A. Golovanev p. 728  abstract

Dynamic Magnetization Characteristics of Proportional Electromagnets

A. M. Lankin, N. I. Gorbatenko and M. V. Lankin p. 731  abstract

Application of Aluminum Coatings in Vibrational Finishing of Steel Parts

Yu. P. Ankudimov, I. V. Sadovaya, M. M. Chaava, L. V. Tolmacheva and Yu. G. Chernega p. 733  abstract

Nanoindentation of ZrN Coatings on Silicon and Copper Substrates

A. S. Vasiliev, E. V. Sadyrin, B. I. Mitrin, S. M. Aizikovich and A. L. Nikolaev p. 735  abstract

Dynamic Monitoring of the Ion-Plasma Treatment of Complex Components

B. M. Brzhozovskii and V. V. Martynov p. 738  abstract

Influence of Segregation Processes on the Mechanical and Tribological Characteristics of Materials

I. V. Kolesnikov, E. S. Novikov and S. A. Danil’chenko p. 740  abstract

---