Contents
Russian Engineering Research

Vol. 31, No. 9, 2011

A simultaneous English language translation of this journal is available from Allerton Press, Inc.
Distributed worldwide by Springer. Russian Engineering Research ISSN 1068-798X.

Load Capacity of Planetary Transmission with Internal Gear Engagement

F. I. Plekhanov and A. V. Ovsyannikov p. 825  abstract

New Control and Executive Devices for Multimotor Electrohydraulic Drives

Yu. A. Medvedev and V. P. Kuznetsov^† p. 828  abstract

Axial Error of Gears and the Tooth Stress State in Involute Gear Systems

V. I. Korotkin and D. A. Gazzaev p. 834  abstract

Extending Rail Life

I. A. Vorob’ev p. 838  abstract

Electroelasticity Problems for Multilayer Nano- and Micromotors

S. M. Afonin p. 842  abstract

Extending the Life of Threaded Joints

Kh. A. Faskhiev p. 848  abstract

Redistribution of Residual Stress in Plasma-Sprayed Coatings

G. I. Bondareva p. 853  abstract

Carrying Capacity of Braced Soldered Joints

Yu. A. Tsumarev and E. V. Ignatova p. 856  abstract

Friction of Fuel-Rod Casings and Spacing Cells in the Pile of a Water-Cooled,
Water-Moderated Reactor

Yu. N. Drozdov, E. P. Osipova, T. I. Nazarova, V. V. Makarov, V. V. Abramov,
A. V. Afanas’ev, and M. V. Puchkov p. 859  abstract

The Design of Abrasive Machining Operations

A. A. Koshin, B. A. Chaplygin, and D. V. Isakov p. 864  abstract

High-Porosity Wheels Based on Cubic Boron Nitride for Defect-Free Grinding

Z. I. Kremen’ and A. I. Lebedev p. 867  abstract

Automation of Process Design by Design–Technological Parameterization

D. E. Maksimovskii p. 870  abstract

Mixing and Homogenization of Components in the Manufacture of Antifrictional Materials

S. V. Goncharov p. 873  abstract

Development of a New Theory of Thermal Cutting Processes
21. Determining Optimal Cutting Conditions to Extend Tool Life

A. L. Vorontsov, N. M. Sultan-Zade, A. Yu. Albagachiev, and A. I. Savkin p. 877  abstract

Influence of Metal-Cladding Addivite Valena on Combined Machining

M. A. Zinin, S. A. Gavrilov, A. V. Shchedrin, and D. N. Garkunov p. 880  abstract

Stability of Two-Axle Vehicle on Turns

G. I. Mamiti, S. Kh. Pliev, and V. B. Tedeev p. 885  abstract

Systems for Selecting the Gaps in the Pinion–Rack Gear Systems of Drives
in Multipurpose Machine Tools

G. N. Limarenko and V. I. Usakov p.887  abstract

Assessing the Applicability of Numerically Controlled Machine Tools

I. O. Aver’yanova p. 891  abstract

Tool for High-Precision Gear Grinding by Copying

V. I. Kurdyukov, A. A. Andreev, and N. L. Kostyreva p. 895  abstract

Selecting Components for Composite Multicutter Hard-Alloy Tools

A. L. Plotnikov, E. G. Krylov, and E. V. Dudkin p. 898  abstract

Performance of Electrocorundum Grains in Microcutting

V. M. Shumyacher, E. S. Danilova, and I. O. Pushkarev p. 901  abstract

Total and Plastic Contact Length of Chip with Tool’s Front Surface

A. S. Aseev and L. S. Sidorenko p. 903  abstract

Standardization of Grinding Wheels

D. V. Ardashev p. 910  abstract

Improving the Wear Resistance of Oil-Industry Components

A. M. Gafarov, V. A. Gafarov, and N. Sh. Aliev p. 913  abstract

Filters for Purifying the Working Liquids in Hydraulic Machine Tools

V. V. Burenin p.918  abstract

Pleiades Publishing home page | journal home page | top

If you have any problems with this server, contact webmaster.