Contents
Russian Engineering Research

Vol. 30, No. 9, 2010

A simultaneous English language translation of this journal is available from Allerton Press, Inc.
Distributed worldwide by Springer. Russian Engineering Research ISSN 1068-798X.

Properties of a Multimotor Electrohydraulic Drive with Random Parameter Variation

Yu. A. Medvedev and V. P. Kuznetsov p. 851  abstract

Design of Piston Transmission

V. I. Gol’dfarb and M. N. Karakulov p. 856  abstract

Planetary Ball Transmissions: Strength Calculations

M. E. Lustenkov p. 862  abstract

Rotor Balancing

S. M. Beloborodov p. 867  abstract

Random Load Processes in Fatigue Strength Calculations

V. A. Kolokol’tsev and M. V. Avramov p. 870  abstract

Determining the Forces on the Screws in Two- and Three-Bearing Two-Screw Pumps

V. M. Ryazantsev and V. V. Plyasov p. 877  abstract

Improved Operation of Transmissions

V. A. Popov p. 886  abstract

Frictional-Surface Microgeometry of Powder Coatings and Materials Obtained
by High-Energy Technologies

G. G. Vinokurov and O. N. Popov p. 889  abstract

Polytetrafluoroethylene-Based Polymer Composites with Increased Wear Resistance
in Dry Friction

P. N. Petrova and A. L. Fedorov p. 895  abstract

Optimal Approaches in Part Manufacture

B. M. Bazrov and A. M. Arzybaev p. 900  abstract

Hybrid Technologies in the Production of Manufacturing Blanks

S. G. Komaishko, G. N. Kulik, M. V. Moisei, K. V. Suzdal’,
A. Yu. Tonkonog, and S. K. Pluzhnikov p. 904  abstract

Adaptive Control System for a Tool Drive in Machining

D. A. Korolev, V. G. Romashin, A. P. Shadrin, O. V. Nepovinnykh, and V. A. Rogov p. 906  abstract

Nanostructural Wear-Resistant Coatings Produced on Metal-Cutting Tools
by Electric-Arc Evaporation and Magnetronic Sputtering

F. V. Kiryukhantsev-Korneev, N. A. Shirmanov, A. N. Sheveiko, E. A. Levashov,
M. I. Petrzhik, and D. V. Shtanskii p. 910  abstract

Development of a New Theory of Thermal Cutting Processes
9. Analysis of the Basic Thermophysical Theories of Cutting (Part 6)

A. L. Vorontsov, N. M. Sultan-Zade, A. Yu. Albagachiev, and A. I. Savkin p. 921  abstract

Progress at Stankin Moscow State Technical University

S. N. Grigor’ev p. 928  abstract

Role of the Machine Tool’s Kinematic Structure in Ensuring Machining Precision

V. V. Bushuev and V. V. Molodtsov p.931  abstract

Damping in Dynamic Machine-Tool Calculations

V. S. Khomyakov p. 934  abstract

Influence of the Dynamic Characteristics of the Tool and the Blank on the Vibroacoustic
Monitoring of Cutting

V. I. Zavgorodnii, M. P. Kozochkin, A. R. Maslov, and F. S. Sabirov p. 939  abstract

Vibroacoustic Diagnostics of Spindle Bearings in High-Speed Machine Tools

M. P. Kozochkin, F. S. Sabirov, D. N. Suslov, and A. P. Abramov p. 944  abstract

Reducing the Vibration when Cutting Internal Threads by Mills Equipped
with Replaceable Hard-Alloy Plates

D. V. Kosarev, V. A. Grechishnikov, and V. A. Kosarev p. 948  abstract

Simulation of Technological Systems in Custom Production

V. A. Dolgov p. 951  abstract

Diamond Boring of Holes in Brittle Nonmetallic Components

A. V. Balykov, I. E. Androsov, and L. S. Listunov p. 956  abstract

High-Strength Ceramic Composite with Nanostructural Coating in Environmentally
Benign Dry Cutting with Compensation of Lubricant Properties

A. S. Vereshchaka, A. K. Kirillov, E. S. Sotova, and A. V. Dacheva p. 959  abstract

Mechatronic Electropneumatic Servo Drives

Yu. V. Ilyukhin, A. N. Kharchenko, and S. A. Arfikyan p.964  abstract

Pleiades Publishing home page | journal home page | top

If you have any problems with this server, contact webmaster.