Vol. 46, No. 8, 2026

Russian Engineering Research

Design Analysis and Calculation of an Electro-Baromembrane Flat-Chamber Apparatus for the Separation of Industrial Solutions

S. V. Kovalev, O. A. Kovaleva, and N. A. Fedotov p. 987 abstract

Numerical Solution and Analysis of a Mathematical Model of a Micro-Hydropower Plant for Low-Head Flows

M. M. Turdaliev and U. A. Khakimov p. 993 abstract

Promising Ways to Improve Gearboxes and Transmissions of High-Load Industrial Robots

M. N. Zakharov and A. V. Chirkin p. 996 abstract

Prediction of Low-Cycle Fatigue of Heat-Resistant Nickel Alloys for Aviation Purposes

M. A. Gorbovets, I. A. Khodinev, S. A. Monin, and P. V. Ryzhkov p. 1003 abstract

Inverse Kinematics and Control of a Python and Arduino-Based Manipulator with Singularity Avoidance

M. Y. Alwardat, Y. Benslimane, and Hassan M. Al-Araji p. 1010 abstract

Wedge Freewheel Mechanisms

A. Ya. Ryzvanovich, V. A. Generalov, and M. S. Balunov p. 1016 abstract

Determining the Combined Influence of the Main Factors on Machine Part Wear

O. V. Burlachenko and A. P. Ryzhko p. 1020 abstract

Evaluation of the Damping Capacity of Metal–Polymer Bearings

V. A. Kokhanovskiy, A. A. Fedenko, E. V. Ryazanova, and Yu. A. Proskoryakova p. 1025 abstract

Change in Load Capacity of a Small-Radius Multisatellite Planetary Gear on Deformation of Its Elements

F. I. Plekhanov, O. V. Ovsjannikov, and E. F. Vichugjanina p. 1028 abstract

Influence of the Radius and Spacing of Gratings on the Efficiency of Mechanical Cleaning of Raw Cotton

R. K. Rasulov, J. K. Raimkulov, M. S. Imomnazarov, and S. Z. Musirov p. 1034 abstract

Improving the Effectiveness of a Friction Machine for Testing of Materials and Coatings for Resistance to Abrasive Wear

O. V. Denisov and V. N. Malyshev p. 1037 abstract

Design of an Experimental Study of High-Speed Milling and Thread Milling of High-Strength Shipbuilding Steels

E. V. Fomin, N. S. Oblovatskaya, and E. V. Davydov p. 1042 abstract

Structural and Phase Transitions in the Surface Layer of VT1-0 Titanium on Heat Treatment

E. Yu. Remshev, G. A. Vorob’eva, D. V. Gusev, A. E. Remsheva, and K. A. Kunitsyn p. 1046 abstract

Cutting Forces and Chip Morphology during Milling of VT6 (Ti6Al4V) Alloy Produced by EBAM

A. S. Babaev, V. N. Kozlov, N. L. Savchenko, A. R. Semenov, and R. S. Tsygankov p. 1050 abstract

Experimental Research of the Effectiveness of an Aviation Laser Anti-Icing System

S. M. Beloborodov, V. Y. Madorskii, A. V. Babushkina, and N. V. Vladimirov p. 1059 abstract

Study of the Effect of the Temperature of a Helium–Air Mixture on the Lifting Capacity of an Airship

M. I. Belov, D. V. Belov, S. A. Andreev, N. E. Kabdin, and D. M. Selezneva p. 1063 abstract

Selection of Wear-Resistant Coating for High-Temperature Brush Seals

V. V. Alisin, A. Y. Albagachiev, M. N. Yerofeyev, and V. F. Yudkin p. 1069 abstract

Modular Arrangement of Products in Mechanical Engineering

N. A. Rodionova p. 1073 abstract

Planning the Experimental Development of Rocket and Spacecraft Components on the Basis of Heterogeneous Statistical Information Derived at Different Test Stages

E. V. Gusev, A. V. Paleshkin, and P. V. Pichuzhkin p. 1076 abstract

Development of an Algorithm for Processing and Displaying the Results of Ultrasonic Testing of Products Manufactured by Selective Laser Melting Using the LSTM and YOLO Neural Network Architectures

A. S. Sergeev and A. V. Fedorov p. 1081 abstract

Transformation of Lean Production in High-Technology Marketing: From Cost Reduction to Time-to-Market Acceleration

N. A. Mezina and G. V. Tikhonov p. 1087 abstract

Using Artificial Intelligence Technologies to Improve the Efficiency of Quality Control in Industrial Enterprises

N. S. Efimova and S. N. Sorokoumova p. 1090 abstract

FMEA As a Tool for Customer Satisfaction Management

A. Yu. Platitsyn, D. I. Panyukov, V. N. Kozlovskii, and O. V. Nikishov p. 1094 abstract

Substantiation and a Methodology for Determining the Integral Quality Indicator of Automobiles during the Warranty Period of Operation

A. S. Demkin, A. Yu. Platitsyn, V. N. Kozlovskii, and D. I. Panyukov p. 1099 abstract

Machine-Learning Algorithms for Detecting Corporate Quality Violations in the Auto Service Centers of a Major Automotive Brand

A. Yu. Platitsyn, V. G. Mosin, A. S. Demkin, and V. N. Kozlovskii p. 1103 abstract

Methods of Managing the Duration of the Operating Cycle of a High-Tech Enterprise

E. V. Surkova, Yu. A. Kostikov, and A. M. Bat’kovskii p. 1111 abstract

Risk-Oriented Approach to the Management of Noncore Assets

T. Yu. Nikolenko, N. O. Melik-Aslanova, and L. V. Semina p. 1116 abstract

Managerial Decision-Making in the Context of Import Substitution in Aircraft Manufacturing: Economic Evaluation and Quality Risk Management

N. V. Arseneva, V. V. Kolosova, and G. V. Tikhonov p. 1121 abstract

Supply Chain Resilience Management at an Aircraft Manufacturing Enterprise in the Context of Geoeconomic and Logistics Shocks

N. V. Arseneva and G. V. Tikhonov p. 1127 abstract

Contents

Russian Engineering Research