Contents

Russian Engineering Research

Vol. 45, No. 8, 2025

Failure of the Tooth Attachment Bolt in a Bulldozer Blade

E. A. Tarasov p. 1053  abstract

Applicability of the Dynamic Criterion of Closeness to Singularities: A Case Study of a Parallel Manipulator with Four Degrees of Freedom

P. A. Laryushkin p. 1056  abstract

Stability Analysis of a Dual-Mass Electromechanical System with External Damping

A. V. Sapsalev, Yu. V. Pankrats, K. A. Kuratov, V. V. Bogdanov, and N. P. Savin p. 1062  abstract

Development of a Storage–Feeder Unit for Roots and Tubers

A. V. Brusenkov and D. N. Konovalov p. 1071  abstract

Improvement of Plasmatron for Surface Nanostructuring of Steel and Alloys

S. S. Samotugin p. 1075  abstract

Force Analysis of a Planetary Roller Screw Mechanism with Axial Backlash

D. S. Blinov and D. I. Tsvetkov p. 1080  abstract

Impact of Pegs Inclined to the Cleaning Drum’s Axis on Raw Cotton

R. Kh. Rosulov, J. K. Rayimkulov, and T. M. Kuliyev p. 1088  abstract

Influence of Microgeometry Parameters of the Mating Surfaces on Performance Characteristics of Interference Fits

N. E. Kurnosov and Yu. Yu. Nakashidze p. 1093  abstract

Surface Profile Changes in Contact of Metal and Powder Coating with Slipping Friction at Low Temperatures

G. G. Vinokurov, N. F. Struchkov, and D. I. Lebedev p. 1098  abstract

Describing the Dynamic Behavior of Disperse Material in Terms of Its Limiting States

I. P. Popov p. 1104  abstract

Influence of Severe Plastic Deformation on the Performance of Mg–Ca Magnesium Alloys with TiO2 and ZrO2 Coatings

V. I. Semenov and S. V. Chertovskikh p. 1107  abstract

Shaping of Housing Stiffeners by Viscoplastic Deformation

V. N. Chudin and A. A. Pasynkov p. 1113  abstract

Improving the Surface Quality of Parts Made of Thermally Non-Hardenable Aluminum Alloy by Ball Flow Machining

V. A. Levko, L. P. Sysoeva, P. A. Ivanov, A. S. Sysoev, and O. V. Litovka p. 1117  abstract

Modern Methods of Studying Dynamic Stability of Cutting Machining Systems

Yu. G. Kabaldin p. 1124  abstract

Optimal Restoration of the Rolling Surfaces in Wheel Pairs

I. N. Khariyev, V. A. Kuznetsov, A. A. Cherepakhin, and V. P. Lyalyakin p. 1131  abstract

On Functional Characteristics of Materials during Operation of the Brake Disc–Pad Friction Pair

D. A. Boldyrev and L. I. Popova p. 1134  abstract

Drive Power for a Crusher Based on Shear Deformation

A. G. Nikitin and N. M. Kurochkin p. 1137  abstract

Modeling the Efficiency of Precision Control and the Dimensional Tool Wear Index in the Shaving–Rolling Process

A. A. Malikov, A. V. Sidorkin, V. D. Artamonov, and Yu. V. Kovalev p. 1139  abstract

Design of Thin-Film S-Band Frequency Multiplexers

A. P. Gorbachev, N. V. Tarasenko, and I. I. Pimonov p. 1146  abstract

Improved Tool for Determining the Stator–Rotor Misalignment in an Automobile Generator

A. S. Saksonov, V. N. Kozlovskii, O. D. Ibragimov, and M. V. Nenashev p. 1151  abstract

Overview of Quality Management Standards and Primary Issues of the Process of Electric Vehicle Design

I. A. Belyaeva, V. N. Kozlovskii, A. S. Saksonov, and I. I. Khabibulin p. 1154  abstract

Problems of Developing New Automobile Designs: Quality Costs, Project Maturity, Vehicle Testing

I. A. Belyaeva, V. N. Kozlovskii, M. V. Nenashev, and D. I. Panyukov p. 1159  abstract

Target Indicators of Completion of Pre-Production of Electric Vehicles

I. A. Belyaeva, V. N. Kozlovskii, D. I. Panyukov, and D. A. Demoretsky p. 1164  abstract

Modeling Thermal Conductivity in a Rod Based on the Maxwell–Cattaneo Equation Using Deep Machine Learning

Ya. A. Vakhterova, E. L. Kuznetsova, and Phan Tung Son p. 1168  abstract

Stress–Strain State of a Cylindrical Shell Segment with a Hole in Nonuniform Heating

L. N. Rabinskii and N. N. Kurdyumov p. 1173  abstract

Applying Neural Network Analysis to X-ray Tomograms of Additive Layers in Metal Workpieces

E. N. Simonov, A. V. Prokhorov, O. I. Ivanova, and N. D. Cherkasov p. 1178  abstract

Initial Boundary Value Problem for a Sobolev-Type Equation in a Four-Dimensional Cylindrical Shell

Yu. A. Kostikov and A. M. Romanenkov p. 1182  abstract

Control Function in Management Systems Developed in Accordance with ISO Requirements

E. E. Galkina, A. E. Sorokin, and M. A. Kovtun p. 1186  abstract

Improving Import Substitution in the Aircraft Industry by Collaboration

A. A. Sazonov and S. V. Novikov p. 1189  abstract

Labor Costs in Research and Development Projects: Improved Assessment in Terms of the Price Structure

V. A. Zolotova p. 1192  abstract

Procurement Management in a High-Tech Corporation at the Present Stage

V. A. Bunak, S. V. Novikov, and G. V. Ilyakhinskaya p. 1197  abstract