Vol. 43, No. 8, 2023

Russian Engineering Research

Drain Valve Design: Analysis of Hydraulic Fluxes in Helicopter Fuel Lines

A. O. Kachurin, M. A. Brutskiy, A. S. Petrov and A. A. Trofimov p. 903 abstract

Deformability of a Planet Gear’s Axle in a Planetary Gear and Its Influence on the Load Distribution

F. I. Plekhanov, A. S. Sunzov and E. F. Vychugjanina p. 909 abstract

Operating Speeds of a Hybrid Reciprocating Power Unit in Compressor and Pump Modes

V. E. Shcherba p. 914 abstract

Estimating the Contact Strength of Machine Parts on the Basis of the Fatigue Strength

M. N. Zakharov and A. V. Medovshchikov p. 922 abstract

Import Substitution and Monitoring of Workpiece Quality

N. S. Sevryugina and A. S. Apatenko p. 927 abstract

Stirrup Design Using SolidWorks Simulation Tools

E. V. Mitin, S. P. Suldin, A. Yu. Ovchinnikov and N. Yu. Knyazeva p. 934 abstract

More Efficient Construction in Constrained Urban Settings

N. A. Fomenko, O. V. Burlachenko, V. G. Polyakov and S. A. Chebanova p. 939 abstract

Analysis of the Condition of a Gas Turbine System. 2. Anomalies in the Degradation Process

V. L. Blinov and G. A. Deryabin p. 942 abstract

Honing the External Surface of High-Precision Thin-Walled Cylinders for Marine Mechanisms: Kinematic Aspects

A. M. Gafarov, I. A. Khankishiyev and S. G. Pashazade p. 948 abstract

Application of a Magnetic Field in Metal Melting

F. M. Shirzadov, A. I. Sadykhov and R. E. Dadashov p. 952 abstract

Influence of Machining Parameters on the Precision of an Axial Compressor Disk

G. A. Nesterenko and I. S. Nesterenko p. 955 abstract

Multicriterial Performance Assessment of a Stamping Box for Coal Batch: Digital Load Modeling

S. V. Doronin and E. M. Reizmunt p. 958 abstract

Production of Magnetorheological Suspensions by Cavitation

B. A. Gordeev, E. G. Ivanov, S. N. Okhulkov, A. I. Ermolaev and A. S. Plekhov p. 962 abstract

Abrasive Machining by Textolite Laps Using an Iodine Suspension

V. I. Butenko, O. S. Dolgov, D. S. Durov and B. B. Safoklov p. 968 abstract

Influence of the Concentration and Particle Size of the Filler in Epoxy–Gravel Composite on the Resistance to Contact Deformation when Introducing a Solid Sphere

A. M. Mikhal’chenkov, S. A. Fes’kov and I. V. Kozarez p. 972 abstract

Improving the Mechanical Properties of 3D-Printed Metal

Yu. G. Kabaldin, M. S. Anosov, P. V. Kolchin and D. A. Shatagin p. 976 abstract

Stamping of Nonuniform Channels. 7. Kinematic and Stress State of the Workpiece in Constrained Extrusion. 7.4. Completely Constrained Extrusion

A. L. Vorontsov p. 980 abstract

Equipment for Creating Cellular Relief on Frictional Surfaces

K. A. Bashmur and E. A. Petrovsky p. 983 abstract

Predictive Diagnostics of Rolling Stock and the Industrial Internet of Things

O. E. Pudovikov, V. N. Tarasova and V. V. Degtyareva p. 987 abstract

Standard Approaches to Ensuring the Electromagnetic Compatibility of Vehicles

A. S. Podgornyi, P. A. Nikolaev and V. N. Kozlovskii p. 991 abstract

Disruption of an Operational Vehicle’s Electrical Systems by Electromagnetic Interference: A Probabilistic Model

A. S. Podgornyi, V. N. Kozlovskii and P. A. Nikolaev p. 997 abstract

Electromagnetic Susceptibility Matrix of a Vehicle

A. S. Podgornyi, P. A. Nikolaev and V. N. Kozlovskii p. 1000 abstract

Controlling the Influence of an Asymmetric Air Gap in a Synchronous Electrical Machine on the Unidirectional Attractive Force

Yu. A. Makarichev, V. N. Kozlovskii, A. S. Saksonov and Ya. A. Rattsev p. 1003 abstract

Influence of the Stabilizing Nozzle on the Quality of High-Speed Plasma Metallization

Yu. D. Shchitsyn, D. S. Belinin, S. D. Neulybin, K. P. Karunakaran, A. V. Kazantsev and S. G. Nikulina p. 1007 abstract

Risk Assessment and Risk Management

D. I. Panyukov, V. N. Kozlovskii, D. V. Aidarov and M. V. Shakurskii p. 1011 abstract

Creating a Team for Failure Mode and Effects Analysis (FMEA)

D. I. Panyukov, V. N. Kozlovskii, D. V. Aidarov and M. V. Shakurskii p. 1014 abstract

Structural and Functional Analysis in Failure Mode and Effects Analysis (FMEA)

D. I. Panyukov, V. N. Kozlovskii, D. V. Aidarov and M. V. Shakurskii p. 1018 abstract

Improved Effects Assessment in Failure Mode and Effects Analysis (FMEA)

D. I. Panyukov, V. N. Kozlovskii, D. V. Aidarov and M. V. Shakurskii p. 1023 abstract

Prospects for Augmented Reality Technology and the Digital Transformation of High-Tech Production

R. S. Golov, D. A. Prokof’ev and A. S. Koshelev p. 1027 abstract

Classification of Collaborative Industrial Robots in the Digital Transformation of High-Tech Enterprises

R. S. Golov, D. A. Prokof’ev and A. S. Koshelev p. 1030 abstract

Production of Machine Tools for the Aircraft Industry: Import Substitution

A. I. Tikhonov and N. V. Prosvirina p. 1033 abstract

Assessing the Efficiency of New Production Projects

N. K. Chaika p. 1037 abstract

Localization of Machine Production in Russia: Progress and Prospects

R. S. Golov and L. A. Kostygova p. 1041 abstract

Contents

Russian Engineering Research