Vol. 40, No. 8, 2020

Russian Engineering Research

Model for Minimizing the Volume of Two-Bearing Shafts

B. M. Abdeev, G. A. Gur’yanov and E. A. Klimenko p. 609 abstract

Imitation of Random Sequences of Extremums in Fatigue Tests with Irregular Loading

N. A. Makhutov, I. V. Gadolina, S. G. Lebedinskii, E. S. Oganyan and A. A. Bautin p. 614 abstract

Effective Thermal Conductivity of Composites with Contact Thermal Resistance between the Inclusions and the Matrix

I. V. Lavrov, A. A. Kochetygov, V. V. Bardushkin, A. P. Sychev and V. B. Yakovlev p. 622 abstract

Automation of Multisaw System with Circular Motion of Linear Saw Blades

M. A. Blokhin and D. A. Podlesnyi p. 628 abstract

Interaction of Elastic Vibrations with the Object’s Surface in Acoustic Nondestructive Monitoring

N. P. Aleshin, M. V. Grigor’ev, N. V. Krys’ko and A. G. Kusyi p. 634 abstract

Straightening of Shafts by Surface Plastic Deformation with Elastic Flexure of the Workpiece

G. V. Muratkin and V. A. Sarafanova p. 637 abstract

Improving the Milling of Hot-Rolled Strip

M. Z. Pevzner and S. A. Smertin p. 642 abstract

Optimization of Electrodeformational Surfacing by a Flexible Tool on the Basis of Experimental Design

M. A. Levantsevich, E. V. Pilipchuk, N. N. Maksimchenko, L. S. Belevskii and R. R. Dema p. 646 abstract

Production of Spherical Metal Powder for Additive Technology

K. V. Lebedinskii and N. E. Kurnosov p. 652 abstract

Surface Plastic Deformation of Commutator Plates in Electric-Motor Repair

D. Yu. Belan, G. B. Toder, K. V. Averkov and Yu. V. Titov p. 654 abstract

Influence of Diamond Smoothing on the Surface Layer of a 30ХГСН2А-ВД High-Strength Steel Workpiece

A. N. Shvetsov and D. L. Skuratov p. 658 abstract

Condition-Based Economic Assessment of Airplane Engines

M. V. Siluyanova and M. M. Gyazova p. 663 abstract

Predicting the Market for Air Transportation of Heavy Nonstandard Loads

M. M. Gyazova and M. V. Siluyanova p. 666 abstract

Analytical Description of Empirical Probability Distribution Functions

P. A. Iosifov and A. V. Kirillin p. 669 abstract

Analysis of Machine-Tool Dynamics by Electrical Analogy

N. G. Chikurov p. 674 abstract

Boring Tool Permitting Scratch-Free Removal

G. S. Zheleznov and A. V. Shirokov p. 681 abstract

Manufacturability of Products

B. M. Bazrov and A. A. Troitskii p. 683 abstract

Improving the Abrasive Finishing of Precision Components

Yu. N. Vivdenko, A. E. Pushina and Yu. I. Safronova p. 688 abstract

Applicability of Magnetic Abrasive Machining by Means of Diamond Suspensions in Gas-Turbine Production

A. G. Boitsov, M. V. Siluyanova, S. V. Kurilovich and V. V. Kuritsyna p. 692 abstract

Preventing Fretting Corrosion of Highly Stressed Airplane-Engine Components

L. V. Denisov, A. G. Boitsov, M. V. Siluyanova and V. V. Kuritsyna p. 696 abstract

IGS-Based Selection of Technological Bases in Machining a Slotted Shaft

E. V. Mitin, S. P. Sul’din and A. E. Mitina p. 700 abstract