Contents
Russian Engineering Research

Vol. 29, No. 7, 2009

Simultaneous English language translation of the journal is available from Allerton Press, Inc.
Distributed worldwide by Springer. Russian Engineering Research ISSN 1068-798X.

Manufacture of Electronic Systems by Mechanical Systems Based
on Multicoordinate Executive Devices

E. N. Ivashov, V. A. Vasin, and S. V. Stepanchikov p. 643  abstract

Contact Rigidity of Metal–Polymer Worm Transmissions

V. I. Molchanov p. 651  abstract

Life of Parts in Pulsed Machines

S. V. Doronin and D. V. Kosolapov p. 655  abstract

Influence of the Triggering Precision of Protective Clutches on the Strength
of Drive Components

M. P. Shishkarev p. 660  abstract

Calculating the Reliability of Shafts with Probability and Possibility Variables
in the Limiting-State Model

V. S. Utkin and L. V. Utkin p. 664  abstract

Estimating the Temperature of an Electrode-Metal Drop when Welding
in a Carbon-Dioxide Atmosphere

A. A. Ostsemin p. 668  abstract

Thermal Conductivity of a Plane Joint

A. S. Ivanov and V. V. Izmailov p. 671  abstract

Wear Mechanisms of Polytetrafluoroethylene and Its Composites

Yu. P. Kozyrev and E. B. Sedakova p. 674  abstract

Resource-Saving Pneumovibrodynamic Hardening of Plane Surfaces for Repair
and Production Processes

A. P. Minakov, I. D. Kamchitskaya, D. L. Zaitsev, and A. V. Tyukov p. 678  abstract

Ensuring Precise Contact–Erosional Straightening of 6A2 and 12A2 Diamond Wheels

Sh. A. Bakhtiarov p. 687  abstract

Grinding Wheel with Grains of Different Sizes

G. A. Guseinov and S. A. Bagirov p. 690  abstract

Primary and Secondary Factors Affecting the Basing Precision of Blanks

F. N. Abramov p. 693  abstract

Extension of Thick-Walled Cylindrical Anisotropic Blanks, with Thinning of the Wall

S. S. Yakovlev and E. Yu. Polikarpov p. 698  abstract

Change in Geometry of a Cylindrical Blank in Upsetting with Contact Friction

A. L. Vorontsov p. 705  abstract

Electromechanical Surface Treatment of Slipping Guides in Metal-Cutting Machines

V. I. Zhiganov and R. Sh. Khalimov p. 714  abstract

Mathematical Model of Rotary Table in Control Problems

M. S. Lysov and A. V. Starikov p. 719  abstract

Minimax Optimization of the Preventive Repair of Equipment

N. I. Pas’ko and N. V. Antseva p. 723  abstract

Monitoring the Strength of Abrasive Grains in Thermal Shock

O. I. Pushkarev, G. M. Mal’ginova, and E. S. Danilova p. 727  abstract

Influence of Ionic-Plasma Hardening on the Performance of Broaches
in Machining High-Temperature Nickel Alloys

P. N. Filatov p. 732  abstract

Performance of Single-Component Superfinishing Bars

A. A. Emel’yanenko and Yu. N. Polyanchikov p. 735  abstract

Influence of Straightening Conditions for a Grinding Wheel
on the Acoustic-Signal Intensity

V. F. Gur’yanikhin, A. A. Pankov, and E. I. Stakanov p. 739  abstract

Shaping the Surface Topology of Cylindrical Components by Means of an Abrasive Tool

A. M. Kozlov and A. A. Kozlov p. 743  abstract

Reducing the Surface Force in Diamond Smoothing

V. N. Koval’nogov p. 747  abstract

Pleiades Publishing home page | journal home page | top

If you have any problems with this server, contact webmaster.