Contents

Russian Engineering Research

Vol. 46, No. 7, 2026

The Effectiveness of Shock Absorbers with Different Resistance Control Algorithms in the Oscillation Cycle

V. V. Novikov, K. V. Chernyshov, A. V. Pozdeev, and I. A. Belyakov p. 855  abstract

Tribological Tests of Polytetrafluorethylene Modified with Carbon Nanofibers under Different Friction Conditions

T. A. Isakova, P. N. Petrova, M. A. Markova, S. D. Afonnikova, and I. V. Mishakov p. 863  abstract

Development of Thermoelectric Equipment for Ensuring Comfortable Outdoor Rest

Yu. G. Ivanov, S. A. Andreev, and D. A. Ponizovkin p. 871  abstract

Fabrication of Gear Wheels Using Sheet Lamination Additive Technology

N. K. Tolochko, P. V. Avramenko, V. B. Kravtsov, A. P. Levshukov, and A. S. Milkevich p. 876  abstract

Iron Polymorphism during Laser Surface Hardening of Grade 40Kh13 and 14Kh17N2 Steels

V. F. Korostelev p. 880  abstract

Multiparameter Diagnostics of an Experimental Composite Material with an Aluminum Matrix

V. V. Myl’nikov, A. I. Pronin, E. A. Zakharychev, M. V. Myl’nikova, D. I. Shetulov, and N. A. Ryabov p. 884  abstract

Improvement of the Effectiveness of Processing the Intersection Edges of Precision Holes during Honing

V. A. Ogorodov p. 889  abstract

The Creation of a Technological System for Investment Casting in Custom Production

N. V. Dolgov p. 894  abstract

A Project of an Experimental-Industrial Area for Heat Treatment of Sheets of Structural Steel

O. N. Didmanidze, R. S. Fedotkin, V. A. Kryuchkov, A. G. Arzhenovsky, and D. A. Pupkova p. 900  abstract

Transverse Vibrations of a Tool Shaft during Processing of Deep Holes

L. A. Kondratenko and L. I. Mironova p. 907  abstract

Study of the Formation of the Structure and Properties of 30CrMnSi Steel Workpieces Obtained by the WAAM Method

M. S. Anosov and D. A. Ryabov p. 913  abstract

Effect of Milling Parameters on the Distribution of Residual Stresses in Shipbuilding Steel Weldments

S. A. Rusanovskiy, M. P. Khudyakov, N. V. Lobanov, A. A. Boroshnin, and V. N. Evgenov p. 920  abstract

The Economic Effectiveness of the Swabbing Method in the Operation of Marginal Oil Wells

Elman Alamgulu Aliev, Ibrahim Abulfas Habibov, and Sevinc Malik Abasova p. 925  abstract

The Influence of Cutting Modes on the Formation of Residual Stresses during Turning of VT25U Alloy

A. R. Saiduganov, A. A. Sazanov, R. A. Munasypov, S. Kh. Khadiullin, P. P. Chernikov, G. Yu. Sapozhnikov, and D. A. Akhmedyanova p. 930  abstract

Surface Polishing of Components

K. R. Muratov, E. A. Gashev, T. R. Ablyaz, and D. P. Davydov p. 935  abstract

Accuracy in Wire-Cut Electrical Discharge Machining of Corners for VV751P Alloy Components

T. R. Ablyaz, E. S. Shlykov, V. B. Blokhin, K. R. Muratov, I. V. Osinnikov, and V. T. Khairulin p. 939  abstract

Comparison of Productivity and Surface Roughness in Wire-Cut Electrical Discharge Machining of Heat-Resistant Nickel Alloy Components with Different Tool Electrodes

T. R. Ablyaz, E. S. Shlykov, I. V. Osinnikov, V. B. Blokhin, K. R. Muratov, and V. T. Khairulin p. 943  abstract

A Study of a Mathematical Model of the Process of Gas Self-Oscillations in Thermoacoustic Engines and Methane Pyrolysis Reactors

E. V. Kerosirov, I. V. Kudinov, A. V. Eremin, V. V. Zhukov, and Yu. V. Velikanova p. 948  abstract

Designing Thermal Regulation Systems for Spacecraft

V. A. Antonov, A. E. Belyavskii, D. P. Gaivoronskaya, and I. A. Shangin p. 955  abstract

Developing a Process Risk Exposure Indicator as an Extension of FMEA

D. I. Panyukov, V. N. Kozlovskii, D. A. Gusev, and I. V. Timonin p. 958  abstract

Development of a Modified Deming Cycle for Serial Production of Reference Samples for Nondestructive Testing

A. S. Zubarev, V. N. Kozlovsky, A. V. Bardanov, and I. A. Fedulov p. 965  abstract

The Impact of a Car’s Performance Characteristics on Its Value on the Secondary Market

R. A. Davletmendov, V. G. Mosin, V. N. Kozlovsky, and A. S. Demkin p. 971  abstract

A Modernized Full Consistency Method Based on Fuzzy Sets and Entropy Correction for Multicriteria Choice

D. V. Burtsev p. 976  abstract

HR Strategies for Enterprises in the Context of Diversification of High-Tech Production

N. B. Zemlyanskaya and N. V. Kazakova p. 983  abstract