Contents

Russian Engineering Research

---

Vol. 43, No. 7, 2023

---

Automated Generation and Application of Cutting Models

V. I. Poddubnyi, Yu. A. Kryazhev and E. Yu. Gorin p. 751  abstract

Improving the Design of Rotary Vane Vacuum Pumps

O. Yu. Erenkov and D. O. Yavorskii p. 758  abstract

Influence of the Contact Layer on the Stress–Strain State of a Three-Layer Cylindrical Shell

Kh. M. Muselemov, A. I. Bulgakov and I. T. Yarakhmedov p. 761  abstract

Axial Loading of Radial Drive Bearings with Short Cylindrical Rollers

A. S. Ivanov and E. S. Novikov p. 765  abstract

Titanium Alloy Fasteners for Aerospace Engineering

I. A. Vorob’ev and T. Sh. Galiakhmetov p. 771  abstract

Influence of the Contact Pliability and Relative Hardness of the Components on the Load Capacity of Bolts

M. M. Matlin, V. A. Kazankin and E. N. Kazankina p. 777  abstract

Reliability of Capacitive Airplane Ignition Systems with Intact and Damaged Components

F. A. Gizatullin, O. A. Yushkova and A. G. Shaimukhametova p. 780  abstract

Influence of Aerothermoacoustic and Thermal Deformation on the Structure and Properties of Structural Alloys

E. Yu. Remshev, G. A. Vorob’eva, M. S. Smakovskiy and A. G. Semenov p. 784  abstract

Application of Laser Shock Waves in Additive Technology

G. Zh. Sakhvadze p. 789  abstract

Influence of Shaping Trajectory on the Surface Roughness in Milling: Vibroacoustic Monitoring

M. R. Gimadeev, V. M. Davydov and A. A. Li p. 796  abstract

Internal Losses in Machine Tool Production

O. A. Leonov, N. Zh. Shkaruba, Yu. G. Vergazova, G. N. Temasova and D. A. Pupkova p. 802  abstract

Energy-Efficient Equipment for Biopolymer Coextrusion

V. N. Vasilenko, L. N. Frolova, I. V. Dragan, I. Yu. Kochkin and I. D. Eremin p. 808  abstract

Hole Machining in Titanium Alloy Parts

R. V. Guseynov and M. R. Guseynova p. 810  abstract

Simulation of Casting by Means of ProCAST Design Software

E. V. Mitin, S. P. Sul’din and V. V. Keldunova p. 815  abstract

Heat Transfer between Viscous Flow and Cooled Rocket-Engine Components

S. A. Kolesnik and A. S. Novikov p. 818  abstract

Microburring in Honing with Different Tool Motion

K. R. Muratov, E. A. Gashev, T. R. Ablyaz and A. A. D’yakonov p. 823  abstract

More Efficient Machining of 3D-Printed Titanium Alloy

K. R. Muratov, T. R. Ablyaz, E. A. Gashev and A. A. Panteleev p. 826  abstract

Polishing in Ammonium Fluoride Electrolyte

K. R. Muratov, E. A. Gashev and T. R. Ablyaz p. 829  abstract

Influence of Cutting Conditions on the Rough Milling of Aircraft Engine Parts

A. V. Martynyuk, V. V. Kuritsyna and M. V. Siluyanova p. 831  abstract

Impact of Raindrop Erosion on Structural Components

M. Sha, L. N. Rabinskiy and A. A. Orekhov p. 834  abstract

Twin Electron Beam Surfacing Using Vertical Ti–6Al–4V Wire

S. V. Varushkin, V. Ya. Belen’kii, D. N. Trushnikov, Shengyong Pang, K. A. Rozhkov and I. A. Mosyagin p. 838  abstract

Improving the Heat Distribution by Current Bearing Wire in Electron Beam Surfacing Using Vertical Wire

S. V. Varushkin, V. Ya. Belen’kii, Shengyong Pang, T. V. Ol’shanskaya and G. A. Batrov p. 843  abstract

Electric Discharge Machining of a New High-Strength Granulated Nickel Alloy

T. R. Ablyaz, E. S. Shlykov, K. R. Muratov and I. V. Osinnikov p. 847  abstract

Production of Electric Discharge Machining Electrodes by Selective Laser Melting

T. R. Ablyaz, E. A. Morozov, E. S. Shlykov and K. R. Muratov p. 850  abstract

Cyclic Life of Surfaces under Concentrated Energy Pulses

E. S. Shlykov, T. R. Ablyaz, K. R. Muratov, I. V. Osinnikov and M. V. Bannikov p. 854  abstract

Friction Stir Welding of Heat-Resistant Materials for Aircraft Engines

D. N. Kuritsyn, M. V. Siluyanova and V. V. Kuritsyna p. 857  abstract

Ultrasound Treatment of AMg5 Aluminum–Magnesium Alloy Samples Produced from Wire: Numerical Modeling

D. N. Trushnikov, M. F. Kartashev, R. P. Davlyatshin, I. A. Mosyagin and F. R. Sausedo-Zendejo p. 862  abstract

Ultrasound Treatment of AMg5 Aluminum–Magnesium Alloy Samples Produced from Wire: Experimental Data

D. N. Trushnikov, E. A. Krivonosova, G. L. Permyakov, M. F. Kartashev, I. A. Mosyagin and Shengfu Yu p. 866  abstract

Shock Treatment to Control the Structural State and Mechanical Properties of 3D-Printed Silicon Bronze

A. V. Filippov, N. N. Shamarin and E. S. Khoroshko p. 870  abstract

Housings with Internal Cooling Channels Produced by Selective Laser Melting

A. V. Babaytsev and P. O. Polyakov p. 873  abstract

Optimizing Gear Shifts in an Automatic Transmission for Light Commercial Vehicles

A. S. Vashurin, A. V. Tumasov, E. V. Stepanov, A. D. Yarzhemskii and E. I. Toropov p. 877  abstract

Organization of Management Systems for Material Resources at Knowledge-Intensive Enterprises

S. V. Novikov p. 883  abstract

Financial Management Procedure for Enterprises Contemplating Innovative Projects

T. Yu. Nikolenko and L. V. Semina p. 887  abstract

Introduction of a Standardized Gas Generator in Russian Aircraft Engine Production

A. I. Tikhonov, V. M. Kraev and M. V. Siluyanova p. 891  abstract

Aircraft Economics in an Era of Import Substitution

N. K. Chaika p. 895  abstract

Trends in Content Marketing at High-Tech Enterprises in the New Information Space Internet

L. V. Bulantseva p. 899  abstract

---