Contents

Russian Engineering Research

Vol. 45, No. 6, 2025

Forecasting of the Interrepair Mileage of a Wheel Pair Based on a Model of Wear of the Locomotive Wheel Flange

M. G. Shalygin, and A. P. Vashchishina p. 701  abstract

Calculation of Total Misalignment of a Gearbox Output Shaft Relative to the Seal

O. A. Leonov, N. Zh. Shkaruba, Yu. G. Vergazova, and L. A. Grinchenko p. 704  abstract

Synthesis of a Linkage with High Motion Precision

I. A. Khalilov, and S. Kh. Kerimov p. 710  abstract

Optimized Package of Gauge Block Sets

A. P. Fot, A. S. Lelyukhin, A. E. Shukhman, and K. A. Lelyukhina p. 715  abstract

Fuel Injector Nozzle for Internal Combustion Engines

G. A. Krivonosov p. 720  abstract

Calculation of a Roller Separator-Free Rolling Bearing with Single-Row Gear Engagement

D. D. Dubrovskiy, E. N. Pashkov, and S. V. Panin p. 727  abstract

Conceptual Model of a Machine Tool for Hybrid Production Based on Additive Technology

S. I. Antsiferov, E. A. Sychev, A. V. Karachevtseva, E. A. Ashikhmin, and M. G. Matusov p. 732  abstract

Indicators of Tribological Properties of Solid Lubricant Coatings for Reciprocating Friction Pairs Deposited by Unbalanced Magnetron Sputter Ion Plating under Normal Conditions

P. N. Khopin, and P. A. Iosifov p. 738  abstract

Solid-Phase Welding of VT6 Titanium Alloy with Superplasticity

M. Kh. Mukhametrakhimov p. 744  abstract

Principles of Technological Complex Design. High-Speed Cutting of Shipbuilding Materials

M. P. Khudyakov, S. A. Rusanovskiy, and E. V. Davydov p. 749  abstract

Incremental Forming of AD1-M Sheets and Analysis of Plastic Strains

V. V. Mironenko, M. V. Lavrent’eva, N. V. Podrez, E. Yu. Remshev, Z. N. Rasulov, and A. I. Olekhver p. 754  abstract

Selecting the Best Working Fluid in Machining Copper Alloys

A. G. Kisel’ p. 761  abstract

Application of Deep Learning Algorithms to the Study of the Relationship between Acoustic Emission Signals and Grinding Force Parameters

A. P. Mitrofanov, I. A. Rastegaev, and A. V. Novikov p. 765  abstract

Wear of Circular Saw Blades when Machining Wood Chip Materials

V. A. Abbasov, and M. S. Nasirov p. 771  abstract

Development and Production of Aluminum Matrix Composites

A. D. Romanov, V. S. Makarov, E. A. Romanova, A. A. Mironov, and V. A. Kikeev p. 776  abstract

Pressure and Density Distribution in Axisymmetric Compactions Pressed in a Rigid Matrix

A. A. Jafarova p. 780  abstract

Digital Materials Science: Prediction of Structure and Mechanical Properties of New Materials

Yu. G. Kabaldin p. 785  abstract

Errors in Automated Turning of Flexible Compressor Disks

G. A. Nesterenko p. 791  abstract

Economic Implications of UAV Application for Public Administration Purposes

R. S. Golov, S. G. Kamolov, and T. A. Markov p. 794  abstract

Analysis of Lathe Bed Design Using the Autodesk Inventor System

E. V. Mitin, and S. P. Sul’din p. 800  abstract

Stability of Meshed Plates with Consideration of Transverse Shear in Physically and Geometrically Nonlinear Formulation of the Problem

V. V. Kondrashov, A. V. Polozhnov, I. V. Kondrashova, and E. K. Simonov p. 803  abstract

Improving the Reliability of Automobile Generators by Taking Account of the Unidirectional Electromagnetic Attractive Force at the Design Stage

A. S. Saksonov, A. S. Demkin, I. I. Khabibullin, and V. N. Kozlovskii p. 808  abstract

System for Performance Monitoring of the Power Supply System in an Autonomous Vehicle

A. A. Galimova, V. N. Kozlovskii, A. P. Novikova, and E. V. Strizhakova p. 812  abstract

Three-Movable Higher Kinematic Pair of Rack and Pinion Type

A. A. Prikhod’ko, N. A. Polivoda, and M. M. Shchetinin p. 816  abstract

Advanced Honing Technologies for the Manufacture of High-Load Engine Parts

A. G. Boitsov, M. V. Siluyanova, N. V. Akinshin, and V. V. Kuritsyna p. 819  abstract

A BPMN-Based Model of Automotive Service Processes as a Framework for Operational Standardization

D. I. Panyukov, O. V. Nikishov, V. N. Kozlovsky, and M. V. Nenashev p. 824  abstract

Automotive Quality Management in the Context of Electromagnetic Compatibility Based on the APQP Methodology

D. I. Panyukov, V. N. Kozlovsky, A. S. Podgoniy, and D. A. Demoretsky p. 832  abstract

Predicting the Influence of Production Errors in an Electric Motor–Gearbox System on Its Output Characteristics

O. D. Ibragimov, A. S. Saksonov, V. N. Kozlovskii, and D. I. Panyukov p. 838  abstract

Predicting the Competitiveness of New Models in the Auto Industry

A. S. Klentak, and V. N. Kozlovskii p. 842  abstract

Analysis of a Data Transmission Path Model for Specialized Distributed Computing Systems over Ethernet-Based Networks

V. A. Goryuchkin, G. A. Zvonareva, and A. S. Kasatkin p. 844  abstract

Copy-Piercing Electric Discharge Machining with Electrodes Produced by Selective Laser Melting

T. R. Ablyaz, E. S. Shlykov, I. V. Osinnikov, V. B. Blokhin, K. R. Muratov, and V. Yu. Kozhevnikov p. 848  abstract

Surface Microrelief of a New Generation of Polymer Composites after Copy-Piercing Electric Discharge Machining

T. R. Ablyaz, E. S. Shlykov, K. R. Muratov, V. B. Blokhin, I. V. Osinnikov, G. S. Shaimanov, and M. Yu. Simonov p. 851  abstract

Electron-Microscopic Analysis of Surface Layer of Heat-Resistant Nickel Alloys after Electric Discharge Machining

T. R. Ablyaz, E. S. Shlykov, I. V. Osinnikov, V. B. Blokhin, and K. R. Muratov p. 855  abstract

Rastr 350M Polishing Machine

A. A. D’yakonov, K. R. Muratov, E. A. Gashev, T. R. Ablyaz, D. P. Davydov, and A. A. Tuzilov p. 859  abstract

Universal Equipment for Multiposition Electric Discharge Machining

T. R. Ablyaz, E. S. Shlykov, K. R. Muratov, V. B. Blokhin, I. V. Osinnikov, and D. S. Kurushin p. 862  abstract

Parametric Description of Resultant Microcutting Trajectories in Finishing Equipment

K. R. Muratov, A. A. D’yakonov, E. A. Gashev, T. R. Ablyaz, D. P. Davydov, and R. N. Talibullin p. 865  abstract

Influence of Tool Trajectory on the Microrelief of the Machined Surface

K. R. Muratov, A. A. D’yakonov, E. A. Gashev, T. R. Ablyaz, and D. P. Davydov p. 868  abstract

Study of Optimization of Transformation of Multimodal Information Based on Semantic Fields for the Space of Vector Text Documents

A. V. Degtyar’, N. E. Nekrasov, T. A. Markina, and I. B. Gosudarev p. 870  abstract

Meeting ESG Responsibility Requirements by Implementing an Integrated Management System at the Enterprise

E. E. Galkina, and A. E. Sorokin p. 875  abstract

Problems of Accounting and Evaluation of Innovations in the Form of Developed R&D

I. V. Kharcheva p. 879  abstract

Methodology for Comprehensive Value Management of Innovative Projects Based on a Risk-Oriented Approach

A. A. Burdina, N. N. Gerashchenko, D. A. Vasil’ev, and E. S. Burdina p. 884  abstract

Value Management of an Innovative Project Based on Tactical and Strategic Uncertainties of Factors of the External and Internal Environment of Enterprises

A. A. Burdina, B. B. Gorelov, A. A. Nekhrest-Bobkova, and E. S. Burdina p. 890  abstract