Contents

Russian Engineering Research

---

Vol. 44, No. 6, 2024

---

Improving of the Balancing Structures of In-Line Two-Cylinder Piston Engines

V. V. Gusarov, D. V. Apelinskiy, and P. R. Vallejo Maldonado p. 751  abstract

Design of Automotive Vehicle Suspension with Combined Damping

V. V. Novikov, A. V. Pozdeev, K. V. Chernyshov, and D. A. Chumakov p. 756  abstract

Calculation and Structural Analysis of a Roll-Type Electric Pressure Membrane Device for Separation of Industrial Solutions

I. S. Sedoplatov, S. V. Kovalev, N. A. Fedotov, O. A. Kovaleva, and D. I. Kobelev p. 762  abstract

Selecting the Rotor Blade Contour for an Energy-Efficient Snowplow

D. S. Aleshkov, P. A. Korchagin, I. A. Teterina, and E. V. Khir’yanov p. 770  abstract

Assessment of the Load Capacity of Novikov Gears and Involute Gears

V. I. Korotkin, and E. M. Kolosova p. 774  abstract

Fatigue Fracture of Steel and Alloys

I. A. Vorob’ev, and L. A. Vorob’eva p. 779  abstract

Wear of a Frictional Pair Consisting of a Diamond-Bearing Mineral Ceramic and a Ceramic Counterbody

O. O. Novikova, A. N. Bolotov, and V. V. Novikov p. 782  abstract

Automated Determination of MC Codes for Russian Steels in the ISO Classification

A. V. Shchekin, and A. M. Mayorov p. 787  abstract

Estimation of Force Characteristics of Dispersion of Collagen-Containing Materials with a Novel Single-Sided Impact-Cutting Tool

Yu. S. Sergeev, S. V. Sergeev, D. N. Kazartsev, and M. S. Puzankov p. 793  abstract

Linear Regression Equations for Determining the Roughness of Machined Surfaces. Part 1. Turning, Face Milling, Surface Grinding, and Polishing

O. V. Zakharov, and F. D. Suleimanova p. 800  abstract

Influence of Convexity on the Strength of One-Sided Butt Joints with Incomplete Fusion

Yu. A. Tsumarev, T. S. Latun, A. N. Sinitsa, and M. V. Latun p. 807  abstract

Analysis of Technical Solutions for a High-Power Drive for a Pumping Unit Designed for Hydraulic Fracturing of Reservoir Bridges in Isolated Oil/Gas Cavities

V. I. Karlov, and Yu. I. Krykhtin p. 810  abstract

Determining the PV Factor of a Composite Based on Polytetrafluoroethylene and Carbon Fibers

P. N. Petrova, M. A. Markova, and R. S. Tikhonov p. 815  abstract

Study of Glass-Fiber and Basalt-Fiber Laminates in Terms of Kinetics of Moisture Sorption–Desorption after Exposure to Cold Climate Conditions

A. K. Kychkin, A. A. Gavrilieva, E. D. Vasilyeva, A. E. Markov, and A. S. Andreev p. 820  abstract

Increasing the Efficiency of Guillotining of Rolled Metal Sheets Based on Pattern Cutting Optimization

E. V. Zakharova, I. F. Dyakov, and O. G. Krupennikov p. 826  abstract

Electromagnetic Compatibility as an Aspect of Quality Assurance in Designing Vehicle Systems

A. S. Podgornyi, P. A. Nikolaev, V. N. Kozlovskii, and A. S. Saksonov p. 835  abstract

Ensuring Electromagnetic Compatibility of Automobiles by Routine Maintenance

A. S. Podgornyi, P. A. Nikolaev, and V. N. Kozlovskii p. 840  abstract

Approach to Ensuring the Electromagnetic Compatibility of Automobile Components

A. S. Podgornyi, P. A. Nikolaev, and V. N. Kozlovskii p. 843  abstract

Vehicle–Manufacturer Feedback in Ensuring the Electromagnetic Compatibility of Automobile Components

A. S. Podgornyi, P. A. Nikolaev, V. N. Kozlovskii, and O. D. Ibragimov p. 846  abstract

Algorithm of Evaluation of 3D Parameters of a Digital Surface Model

A. N. Popov, P. A. Mel’nikov, and I. N. Bobrovskii p. 850  abstract

Multicoordinate Grinding of Helical Surfaces on High-Strength Tool Materials

P. M. Pivkin, V. A. Grechishnikov, E. Yu. Malysheva, E. S. Nazarenko, and A. B. Nadykto p. 854  abstract

Shaping Conical End Mills: A Critical Review

P. M. Pivkin, V. A. Grechishnikov, V. A. Kuznetsov, Yu. E. Petukhov, A. A. Ershov, I. V. Minin, A. M. Yazev, and A. B. Nadykto p. 858  abstract

Study of Tool Wear in the Process of Physical Modeling of Shaving–Rolling of Cylindrical Gears

A. V. Sidorkin, Yu. V. Kovalev, V. D. Artamonov, and B. A. Malikov p. 861  abstract

New System for Indirect Tool Monitoring in Industrial Systems and Processes

E. S. Yanov, A. V. Antsev, M. S. Vorotilin, and E. I. Minakov p. 868  abstract

Features of Application of the Image Reconstruction Methodology for Fan-Beam X-Ray Computed Tomography to Cone-Beam Radiation and Spiral Scanning

E. N. Simonov, K. M. Vinogradov, A. N. Gorozhankin, A. S. Anikin, and D. Yu. Khryukin p. 871  abstract

Remote Sensing Data from Satellites in Assessing Soil Productivity

S. S. Ogorodnikov, and I. I. Lebedev p. 877  abstract

Remote Sensing Data in Assessing Urban Density

S. V. Ogorodnikova p. 880  abstract

Consumer Behavior in Selecting Power Tools

M. M. Vasil’ev, D. S. Gordienko, D. V. Aidarov, and V. N. Kozlovskii p. 883  abstract

Management of Procurement Business Processes at an Industrial Enterprise

G. A. Skachko, N. S. Efimova, E. V. Surkova, and O. V. Nesterov p. 886  abstract

Limitations of Modeling the Relationship between Financial Ratios of Mechanical Engineering Companies

N. S. Pomuleva p. 890  abstract

---