Contents

Russian Engineering Research

Vol. 43, No. 6, 2023

Vibration Monitoring of Defects in the PO-3 Mobile Neutron Reflector for the IBR-2 Research Reactor by Discriminant and Correlation Analysis

A. G. Sokolova, F. Ya. Balitsky and V. D. Sizarev p. 635  abstract

Output Parameters of a Drum Brake with Floating Shoes

N. N. Gorbatenko p. 641  abstract

Modification of Standard Toothed Belt

S. V. Shevchenko and A. A. Mukhovatiy p. 648  abstract

Electromechanical System of Floating Wave Power Plant

A. B. Dar’enkov, D. A. Malyarov, A. S. Plekhov and E. V. Kryukov p. 651  abstract

Analysis of the Condition of a Gas Turbine System. 1. Analysis of Measurement Data

V. L. Blinov and G. A. Deryabin p. 660  abstract

Mathematical Model of an Oscillator of Arbitrary Frequency

V. D. Pavlov p. 669  abstract

Measurement of Axial Loads on the Rotor Bearings of Gas-Turbine Engines

K. A. Arkhitskaya, V. P. Monahova and V. A. Afanasyev p. 672  abstract

Modified Novikov Gears with Very Hard Teeth for Special-Purpose Drive Gearboxes

V. I. Korotkin and E. M. Kolosova p. 677  abstract

Verification of Computational Fluid Dynamic (CFD) Modeling of Local Hydraulic Resistance

I. S. Lichadeev and A. A. Nikitin p. 681  abstract

Influence of the Coating Composition and Properties on the Wear Resistance of Shaft–Coating–Bush Systems

L. B. Leont’ev, A. L. Leont’ev, N. P. Shapkin, V. N. Makarov, K. A. Molokov and V. P. Bolotova p. 684  abstract

Stamping of Nonuniform Channels. 7. Kinematic and Stress State of the Workpiece in Constrained Extrusion. 7.3. Forces and Geometric Parameters

A. L. Vorontsov p. 688  abstract

Restoration of Machine Parts’ Working Surfaces by Electromechanical Surfacing

A. N. Shohiyon p. 692  abstract

Failure Kinetics of 3D-Printed 09G2S Steel Produced by Electric Arc Surfacing

Yu. G. Kabaldin, M. S. Anosov, D. A. Shatagin and M. V. Zhelonkin p. 696  abstract

Singular Positions and Controllability of a Robotic Platform

I. A. Duyun, T. A. Duyun and P. S. Kabalyants p. 702  abstract

Motion of a Mill with Polyharmonic Vibration of the Grinding Chamber

S. I. Antsiferov, V. S. Bogdanov, S. Yu. Lozovaya, N. E. Bogdanov and E. A. Sychev p. 707  abstract

Influence of High-Speed Mixer Characteristics on the Strength of Adhesive Mortar for Wall Tiles

S. Yu. Lozovaya, Yu. V. Brazhnik, S. I. Antsiferov and N. P. Nesmeyanov p. 711  abstract

Prototype Nozzle for Three-Layer 3D Concrete Printing

M. Yu. Elistratkin, V. S. Lesovik, A. A. Sheremet, N. I. Alfimova and E. A. Pospelova p. 715  abstract

Hybrid Recirculating Mixer

M. V. Sevost’yanov, A. M. Protsenko, V. S. Sevost’yanov, I. A. Kuznetsova and R. Yu. Shamgulov p. 719  abstract

More Efficient Machining of Parts with an Unsteady Rotational Axis

D. V. Gavrilov, A. V. Khurtasenko, M. N. Voronkova, I. V. Shrubchenko and Yu. A. Bondarenko p. 723  abstract

Optimization of Machining on the Basis of Artificial Intelligence

O. V. Yavurik, Yu. A. Bondarenko, I. V. Shrubchenko, A. V. Khurtasenko and D. S. Baranov p. 727  abstract

Basing of Large Annular Components in Machining by a Mobile Robot

S. N. Sanin p. 731  abstract

Detonation Technology in Producing Metal–Ceramic Powder Targets for Magnetron Sputtering

V. V. Sirota, S. V. Zaitsev, D. S. Prokhorenkov, M. V. Limarenko, A. A. Skiba and M. G. Kovaleva p. 735  abstract

Motion of Filler Particles in Concrete Mixture with Forced Vibration

S. I. Khanin, S. I. Antsiferov, V. P. Voronov, I. V. Kirilov and E. A. Kirilova p. 739  abstract

Motion of Grinding Bodies within the Chambers of a Centrifugal Mill

A. V. Ural’skii, V. I. Ural’skii and E. V. Sinitsa p. 743  abstract

Distribution Cone of Grate Cooler

D. A. Mishin, S. I. Antsiferov, A. V. Karachevtseva, E. A. Ashikhmin and A. A. Litvishko p. 747  abstract