Vol. 40, No. 6, 2020

Russian Engineering Research

Corrective Masses in a Multisaw System with Circular Motion of Linear Saw Blades

M. A. Blokhin and D. A. Podlesnyi p. 453 abstract

Bench Tests for Jackhammers: A Review

V. S. Vanaev p. 458 abstract

Using the Reliability Functions for Individual Types of Faults to Minimize Testing

A. S. Ivanov p. 463 abstract

Predicting the Life of Structural Components

A. S. Gusev, S. A. Starodubtseva and V. I. Shcherbakov p. 467 abstract

Assessing the Relative Interchangeability in Joints with Preload

M. N. Erokhin, O. A. Leonov, N. Zh. Shkaruba, Yu. V. Kataev and Yu. G. Vergazova p. 469 abstract

Improving the Wear Resistance of Gear Teeth by Cyclic Quenching with Inductive Heating

D. M. Berdiev and A. A. Yusupov p. 473 abstract

Surface Modification by a Flexible Tool. 2. Practical Use of Coating Application by Rotary Wire Brushes

L. S. Belevskii, M. A. Levantsevich, R. R. Dema, L. V. Deryabina, T. V. Usataya and O. R. Latypov p. 476 abstract

Working-Liquid Flow through a Rectangular Resistive Fluid Diode

S. Yu. Kaigorodov p. 480 abstract

Elastoplastic Deformation of Tubular Energy Absorbers in Static and Shock Loading

A. P. Evdokimov and A. N. Gromyko p. 483 abstract

Formulation of Automated Process-Design Problems in CNC Systems

S. Yu. Kalyakulin, V. V. Kuz’min, E. V. Mitin and S. P. Sul’din p. 488 abstract

Influence of the Configuration on the Gearbox Characteristics in Metal-Cutting Machines

E. V. Mitin, S. P. Sul’din and A. E. Mitina p. 491 abstract

Noise from Boring Machines and Shafting Lathes

M. G. Goguadze p. 495 abstract

Durable Tools for Friction Stir Welding of High-Temperature Airplane-Engine Components

D. N. Kuritsyn, M. V. Siluyanova, L. V. Denisov, V. V. Kuritsyna and S. A. Kazantsev p. 497 abstract

Nonstandard Slotting Cutters with Mechanical Fastening of Cutting Insert

L. S. Mal’ko, A. V. Sutyagin, I. V. Trifanov and O. A. Sukhanova p. 501 abstract

Minimization of Periodic Machining Errors

V. A. Prilutskii p. 503 abstract

Relation between the Programmed and Actual Feed Motions in Internal Grinding

A. V. Akintseva, A. V. Prokhorov, S. V. Omel’chenko and S. N. Kononov p. 508 abstract

Optimizing the Internal-Grinding Cycle at the Insertion Stage

A. V. Akintseva, A. V. Prokhorov and S. V. Omel’chenko p. 514 abstract

Thermoelectric Model of the Cutting Process

V. P. Kuznetsov, Yu. K. Shlyk, Yu. A. Vedernikova, R. Yu. Nekrasov and I. N. Kokorin p. 518 abstract

Producing Parts of Uniform Thickness from Sheet of Variable Thickness

A. S. Chumadin and E. S. Shemonaeva p. 522 abstract