Contents

Russian Engineering Research


Vol. 37, No. 6, 2017

A simultaneous English language translation of this journal is available from Pleiades Publishing, Ltd.
Distributed worldwide by Springer. Russian Engineering Research ISSN 1068-798X.


Diagnostics of Electrical Components by Means of Their External Magnetic Field

F. R. Ismagilov, D. Yu. Pashali, V. E. Vavilov, I. F. Sayakhov and V. V. Aiguzina p. 467  abstract

Predicting the Limiting Strength of Chaotically Reinforced Polymer Composites with Dispersed Antifrictional Additives

V. V. Bardushkin, V. B. Yakovlev, A. P. Sychev and A. V. Lapitskii p. 471  abstract

Orientation Mechanism with Linear Drives for Robot Manipulators and Limb Prostheses

E. I. Vorob’ev and V. O. Dorofeev p. 475  abstract

Optimizing Pump-Drive Operation to Improve the Energy-Efficiency of Oil Extraction

V. E. Brunman, A. S. Vataev, A. N. Volkov, A. P. Petkova and D. G. Plotnikov p. 479  abstract

Innovative Suspensions for Caterpillar Vehicles

V. I. Poddubnyi, A. Trechtler, A. Warkentin and M. Kruger p. 485  abstract

Production of Rings for Gas-Turbine Engines by the Hot Rolling of Welded Blanks

V. A. Kostyshev and Ya. A. Erisov p. 490  abstract

Running-In of Metal–Polymer Frictional Systems with a Composite Coating

V. A. Kokhanovskii, N. G. Snezhina and A. A. Petrenko p. 494  abstract

Microhardness and Tribological Characteristics of Coatings

A. Yu. Albagachiev and M. I. Sidorov p. 498  abstract

Target Cleaning for Faster CrN/AlN Coating Growth in Magnetron Sputtering

I. M. Bukarev, A. V. Sobol’kov and A. V. Aborkin p. 502  abstract

Optimization of Vibrational Cutting

A. P. Sergiev, A. A. Vladimirov and E. G. Shvachkin p. 505  abstract

Cutting Forces on the Tool Blade

G. S. Zheleznov and S. G. Andreeva p. 509  abstract

ISO 25178 Standard for Three-Dimensional Parametric Assessment of Surface Texture

I. O. Aver’yanova, D. Yu. Bogomolov and V. V. Poroshin p. 513  abstract

Modeling of Hydrostatic Bearings by Electrical Analogy

N. G. Chikurov p. 517  abstract

The Problem Resolution of Designing of Cycles in the Conditions of Modern Automated Production

P. P. Pereverzev and A. V. Akintseva p. 523  abstract

Chip Combustion in Metal Grinding

I. P. Nikiforov, I. V. Plokhov, P. N. Mal’tsev and V. V. Ivanov p. 530  abstract

Surface Microgeometry of Structural-Steel Samples after Diamond Burnishing

A. N. Shvetsov and D. L. Skuratov p. 536  abstract

Residual Stress in the Surface Layer of Ground Parts

V. F. Bez’’yazychnyi, M. V. Timofeev, I. V. Nadezhdin and A. S. Matveev p. 539  abstract

Surface Quality of Turbine Blades in Multicoordinate Grinding

V. A. Poletaev, E. V. Tsvetkov and A. S. Matveev p. 545  abstract

Hole Shaping in the Honing of Thin-Walled Cylinders

V. A. Ogorodov p. 549  abstract

Calculations of Tool Hardness in the Aviation Industry

V. I. Goncharenko and V. S. Oleshko p. 554  abstract

Temperature Fields in Grinding by Abrasive Wheels

D. L. Skuratov and D. G. Fedorov p. 557  abstract

Diamond-Based Pressure Sensors

A. A. Altukhov, E. V. Gladchenkov, V. S. Feshchenko, S. A. L’vov, S. A. Afanas’ev and P. G. Nedosekin p. 561  abstract