Contents
Russian Engineering Research

Vol. 30, No. 6, 2010

A simultaneous English language translation of this journal is available from Allerton Press, Inc.
Distributed worldwide by Springer. Russian Engineering Research ISSN 1068-798X.

Improved Models of Inertial Torque Transformers

S. V. Alyukov p. 535  abstract

Attractive Forces of Highly Coercive Permanent Magnets in End Magnetic Clutches
and Plane Magnetic Systems

A. Ya. Krasil’nikov and A. A. Krasil’nikov p. 543  abstract

Increasing the Flexural Strength of Welded Beams

M. Ya. Brovman p. 547  abstract

Assessing the Measurement Errors due to the Radial Wobble of Machine Parts
in Production Monitoring

A. A. Zyuzin, B. N. Kaz’min, and M. D. Yurov p. 551  abstract

Deformability of Elements of a Planetary Gear Transmission

F. I. Plekhanov and V. S. Kuznetsov p. 557  abstract

Safe Installation of Blank with Clamp Wear

A. A. Seregin p. 561  abstract

Manufacture of Reinforced Antifrictional Epoxy Fluoroplastics by Winding

S. P. Zakharychev and D. V. Otmakhov p. 564  abstract

Local Slip in Tight Joints on Torque Application

A. S. Ivanov and M. M. Ermolaev p. 569  abstract

Influence of Fibrous and Disperse Fillers on the Frictional Load in the Polymer Matrix

Yu. P. Kozyrev and E. B. Sedakova p. 574  abstract

Single-Step Maintenance of Wear Resistance of Cylindrical Machine-Part Surfaces

A. G. Suslov and D. M. Medvedev p. 578  abstract

Antifrictional Carbon-Plastic Slip Bearings for Centrifugal Pumps in Power Stations

V. S. Bogun, A. V. Anisimov, and V. E. Bakhareva p. 582  abstract

Improving the Stability of Cutting on the Basis of Fractal, Dimensional, and Wavelet Analysis

Yu. G. Kabaldin, S. V. Seryi, A. V. Prosolovich, and E. N. Burdasov p. 587  abstract

Improved Contact-Erosion Shaping of Diamond Wheels and Diamond Profile Grinding

Sh. A. Bakhtiarov and V. V. Volkov p. 596  abstract

Expert System for Turning

V. V. Yurkevich p. 598  abstract

Stabilizing Mixture Composition and Properties in the Serial Production of Cast-Iron Forgings

N. Sh. Ismailov p. 601  abstract

Development of a New Theory of Thermal Cutting Processes
4. Analysis of the Basic Thermophysical Theories of Cutting (Part 3)

A. L. Vorontsov, N. M. Sultan-Zade, A. Yu. Albagachiev, and A. I. Savkin p. 604  abstract

Experimental Design of Stamping Machines and Processes

E. N. Chumachenko, Yu. A. Zimin^†, and S. A. Bober p.611  abstract

Organizing Principles in the Design of Complex Manufacturing Products

S. A. Parshina p. 614  abstract

Optimizing the Life of Manufacturing Components

A. G. Suslov and I. V. Govorov p. 617  abstract

Creating a Textbook on Machine-Part Assembly

B. M. Bazrov p. 621  abstract

Numerically Controlled Electroerosional Slot-Cutting Machine

O. I. Aver’yanov and I. O. Aver’yanova p. 624  abstract

Development of CAD Systems for Numerically Controlled Machine Tools

E. M. Berliner p. 629  abstract

Using the Pro/ENGINEER System for Geometric Simulation in Numerically
Controlled Electroerosional Broaching Machines

I. O. Aver’yanova and R. K. Prodan p. 633  abstract

Reducing the Deformation of Cut Layers in Gear Cutting

E. M. Bolotina p. 636  abstract

Automated Monitoring of the Distortion of Parts in Assembly

V. V. Poroshin, V. Yu. Radygin, and D. Yu. Bogomolov p. 638  abstract

Automated Measuring System Based on High-Precision Talystep Profilometer
for Monitoring Surface-Roughness Standards

V. V. Poroshin, D. Yu. Bogomolov, and A. G. Kostyuk p. 642  abstract

Principles for Determining the Deformed State of the Surface Layer and Precision
of Machine Parts in Cutting

A. L. Vorontsov and N. M. Sultan-Zade p. 645  abstract

High-Productivity Manufacturing Process for the Gear Profile of Gearbox Clutches

B. M. Solonitsyn, O. V. Taratynov, and V. V. Klepikov p.651  abstract

Pleiades Publishing home page | journal home page | top

If you have any problems with this server, contact webmaster.