Contents

Russian Engineering Research

Vol. 44, No. 5, 2024

Features of Application of Simulation Modeling of the Process of Forming the Accuracy of Required Dimensions

A. I. Denchik, A. Zh. Kassenov, A. S. Yanyushkin, Zh. K. Musina, K. K. Abishev, D. A. Iskakova and A. A. Tkachuk p. 621  abstract

Increasing the Performance Indicators of Construction Equipment by Improving the Hydraulic Drive of a Working Body

N. A. Fomenko, O. V. Dushko, O. V. Burlachenko, V. G. Polyakov, S. A. Chebanova, S. I. Makhova and O. A. Rastyapina p. 626  abstract

Effect of a Locknut on Load Distribution along the Threads of the Screw of a Tightened Threaded Connection

A. S. Ivanov, S. V. Murkin and E. S. Novikov p. 630  abstract

Reasonable Parameter Values for the Membrane Suspension of a Gyroscope Rotor

A. V. Alekseev p. 635  abstract

Methodology for Preliminary Assessment of Design Parameters of Suction Valve and Discharge Valve of a Piston Hybrid Energy Machine of Volumetric Action with Regenerative Heat Exchange

V. E. Shcherba, E. V. Khodoreva and E. A. Dorofeev p. 639  abstract

Algorithm for Controlling a Spherical Robot with a Pendulum Actuator in the Problem of Pursuing and Hitting a Moving Target

E. A. Mikishanina p. 647  abstract

Influence of the Thermal Expansion of Carbon–Carbon Composites on Their Tribological Stability

I. Yu. Tsukanov, A. N. Lyubicheva and P. O. Bukovskiy p. 654  abstract

Fretting Wear of a Sealing Gasket in a Flanged Joint

O. Yu. Elagina and O. B. Dubinova p. 659  abstract

Relative Elongation of Raw Cotton Fibers as a Result of Adhesion of Fiber Bundles and Action of Tensile Forces

R. Kh. Rosulov p. 664  abstract

Peeling of Polymer Coating from a Substrate: Analysis as a Binary Composite

I. K. Arkhipov, S. I. Koryagin and V. I. Abramova p. 668  abstract

Stress-Strain Analysis of the Initial Material of Workpieces during Broadening Extrusion

P. A. Ermolenkov, A. S. Gusev and E. Yu. Remshev p. 671  abstract

Optimization of Composition, Cold Rolling Scheme, and Structure of Brass Strip Billets for Continuous High-Frequency Pressure Welding

M. Z. Pevzner and D. G. Sergeev p. 679  abstract

Experience of Production of Innovative Industrial Equipment

S. V. Usov, A. V. Zhdanov, A. N. Mitrofanov and I. P. Tochilin p. 686  abstract

Experimental Researches on the Conductivity of Shock Impacts from Track Sled Supports to Products during Supersonic Tests

S. A. Astakhov and V. I. Biryukov p. 691  abstract

Thermal State of Composites at Failure

E. L. Kuznetsova and G. I. Kriven’ p. 697  abstract

Heat and Mass Transfer in Composites with Thermal Waves due to Phase Transitions

V. F. Formalev, S. A. Kolesnik and B. A. Garibyan p. 701  abstract

New Approach to Preventing External Overheating of High-Speed Aircraft

V. F. Formalev, S. A. Kolesnik, B. A. Garibyan, O. A. Pashkov and E. A. Pegachkova p. 705  abstract

Single Tracks Obtained by Selective Laser Melting: Analysis of Digital Images

V. N. Dobryanskiy, K. S. Korobov and L. N. Rabinskiy p. 709  abstract

Considerations on the Study of the Mechanism of Delamination of a Steel Plate Reinforced with Carbon Nanotubes during the Pull-Out Test

G. I. Kriven’, E. S. Senina and D. S. Shavelkin p. 713  abstract

Stress–Strain State of a Half-Space Induced by a Mobile Laser Source

L. N. Rabinskiy, A. A. Orekhov and T. S. Tereshchenko p. 717  abstract

Application of Nth-Order Plate Theory to the Dispersion of Progressive Waves in a Heterogeneous Medium

S. I. Zhavoronok and A. S. Kurbatov p. 721  abstract

Dynamics of Composite Cylindrical Panels with Honeycomb Filler after Internal Damage by Aircraft Engine Jet

L. N. Rabinskiy, M. I. Martirosov, D. V. Dedova and A. V. Khomchenko p. 726  abstract

Research of the Impact of SLM Printing Parameters on Residual Deformation Levels in Aluminum Products

A. V. Babaytsev, S. A. Shumskaya and A. V. Ripetskiy p. 730  abstract

Impact of the Reflective Layer Thickness on Absorptive Capacity and Emission Coefficient in Thermal Control Coatings

A. V. Babaytsev, A. P. Vyatlev and L. N. Rabinskiy p. 734  abstract

Heat Stabilization of Polydimethylphenylsilazane

V. A. Pogodin and A. N. Astapov p. 738  abstract

Stability of a Composite Plate in a High-Enthalpy Gas Flow

B. A. Antuf’ev, A. A. Orekhov and U. S. Tsareva p. 742  abstract

Component Core of High-Tech Industries of the Digital Economy

L. B. Sobolev and S. V. Novikov p. 746  abstract