Contents

Russian Engineering Research

---

Vol. 41, No. 5, 2021

---

Force Analysis of Reciprocating Rotary Planetary Mechanism with Elliptical Gears

A. A. Prikhod’ko p. 387  abstract

Modal Control of Quasi-Static Linear Elastic Displacements of Precision Equipment

Ya. M. Klebanov, I. E. Adeyanov, A. I. Simakov and E. A. Soldusova p. 392  abstract

Indenter Methods of Determining the Adhesive and Cohesive Strength of Thin Coatings

N. A. Voronin p. 398  abstract

Rod-Based Model for Optimization of a Polymer Die with Self-Heating in Cyclic Loading

I. K. Andrianov p. 403  abstract

Ongoing Monitoring of Flexural Stress in Gear Teeth

M. M. Matlin, A. M. Kaunov, V. A. Kazankin and E. N. Kazankina p. 407  abstract

Stamping of Nonuniform Channels. 2. Theoretical Analyses of Nonuniform-Channel Extrusion: A Review

A. L. Vorontsov p. 410  abstract

Thin-Film Nanotechnology for Power Sources

V. V. Sleptsov, D. Yu. Kukushkin, S. N. Kulikov and A. O. Diteleva p. 416  abstract

Low-Temperature Stability of Manganese Steel Parts Obtained by 3D Printing from Welding Wire

Yu. G. Kabaldin, D. A. Shatagin, M. S. Anosov, P. V. Kolchin and A. V. Kiselev p. 419  abstract

Linear Homogenization in the Analysis of Cellular Structures Produced by Additive Technology

D. V. Grinevich, N. O. Yakovlev and P. B. Mazalov p. 423  abstract

Assessing the Efficiency of Technological Systems

M. E. Stavrovskii, A. Yu. Albagachiev, M. I. Sidorov and A. V. Ragutkin p. 428  abstract

Influence of Cutting Conditions on the Surface Roughness of Titanium-Alloy Parts Produced by Additive and Traditional Methods

K. R. Muratov, E. A. Gashev, T. R. Ablyaz and A. A. Panteleev p. 434  abstract

Determining the Actual Contact Area in Mutual Lapping of Surfaces

K. R. Muratov, E. A. Gashev, T. R. Ablyaz, P. V. Maksimov, M. S. Permyakov, A. V. Lekomtsev, P. Yu. Ilyushin and G. Yu. Korobov p. 437  abstract

Quality Maintenance in Turning Antifrictional F-4UV20 Composite Plastic

D. I. Tokarev, A. A. Drozdov, L. D. Sirotenko, E. V. Matygullina and E. S. Shlykov p. 439  abstract

Control of Surface Roughness in Raster Honing

R. A. Muratov, K. R. Muratov, E. A. Gashev and T. R. Ablyaz p. 442  abstract

Influence of the Coolant Concentration on the Final Surface Roughness of Chrome-Plated Parts

K. R. Muratov, E. A. Gashev, T. R. Ablyaz and M. S. Permyakov p. 445  abstract

Mechanical Characteristics and Adhesive Strength of Nickel–Chromium Coatings Applied by Laser Cladding

A. V. Shafranov, T. R. Ablyaz, K. R. Muratov, E. A. Morozov, A. A. Drozdov, A. A. Kornilov and E. V. Lukin p. 449  abstract

Turning of Composites Based on Thermally Expanded Graphite

D. M. Karavaev, E. V. Matygullina, L. D. Sirotenko, E. A. Gashev, A. A. Drozdov and T. R. Ablyaz p. 452  abstract

Electrical Discharge Machining of Parts Produced by Additive Technology

E. S. Shlykov, T. R. Ablyaz, K. R. Muratov, V. V. Shiryaev, R. M. Aliev and A. D. Sultanov p. 455  abstract

Production of Nickel–Chromium Coatings from Powder by Laser Cladding

A. V. Shafranov, E. A. Morozov, K. R. Muratov, T. R. Ablyaz, A. A. Drozdov, A. A. Kornilov and E. V. Lukin p. 457  abstract

Two-Stage Production of Multilayer Composites Containing a Heat-Resistant Superalloy and an Oxide Ceramic

S. A. Oglezneva, M. N. Kachenyuk, A. A. Smetkin and V. B. Kul’met’eva p. 460  abstract

Creation of Cellular Structures with Specified Mechanical Properties by Selective Laser Melting

P. N. Kilina, L. D. Sirotenko, E. V. Matygullina and N. D. Ogleznev p. 463  abstract

Relative Wear of Copper–Graphite Composite Electrodes in Electrical Discharge Machining

N. D. Ogleznev, T. R. Ablyaz, S. A. Oglezneva, K. R. Muratov, E. S. Shlykov and P. V. Maksimov p. 466  abstract

Technological Distortions of Topology Optimized Parts in Additive Manufacturing

P. V. Maksimov, K. R. Muratov, T. R. Ablyaz, K. V. Fetisov and M. S. Permyakov p. 469  abstract

Topology Optimization and Lattice Microstructures in the Design of Parts for Additive Manufacturing

P. V. Maksimov, K. V. Fetisov, A. I. Kurchev and A. S. Belousov p. 472  abstract

Errata

Erratum to: Determination of the Helical-Gear Geometry Taking Account of Total Teeth Wear

A. G. Popovich p. 475  abstract

---