Contents

Russian Engineering Research

Vol. 36, No. 5, 2016

A simultaneous English language translation of this journal is available from Pleiades Publishing, Ltd.
Distributed worldwide by Springer. Russian Engineering Research ISSN 1068-798X.

Self-Braking of Free-Wheel Mechanisms

A. A. Goncharov and An. A. Goncharov p. 339  abstract

Increasing the Load Capacity and Rigidity of Roller–Screw Mechanisms by Adjusting the Screw Surfaces

V. V. Morozov, V. I. Panyukhin and A. V. Zhdanov p. 345  abstract

Optimization of Stays for the Machining of Long Stepped Shafts

A. G. Yagopol’skii and N. Yu. Kropotin p. 352  abstract

Taking Account of the Contact-Layer Pliability in End Clip Design

M. M. Ermolaev p. 355  abstract

Thermal Conditions in the Additive Manufacture of Metallic Parts in Vacuum

O. N. Alyakrinskiy, D. Yu. Bolkhovityanov, P. V. Logachev, A. M. Medvedev, Yu. I. Semenov and A. A. Starostenko p. 360  abstract

Lubricator Casings for Locomotive Wheel Rims

V. A. Kokhanovskii, I. A. Maiba, D. V. Glazunov and I. V. Bol’shikh p. 364  abstract

Calibration of Thin-Walled Precision Pipe by Transverse Compression and Expansion Using a Multisector Tool

M. A. Vasechkin, O. Yu. Davydov, S. V. Egorov and A. B. Kolomenskii p. 366  abstract

Polymer Composites Based on Polytetrafluoroethylene Modified with Motor Oil

P. N. Petrova, A. L. Fedorov and A. A. Okhlopkova p. 371  abstract

Machining Polymer Workpieces on a Lathe after Preliminary Surface Deformation

O. Yu. Erenkov, A. S. Vereshchagina, E. G. Kravchenko and M. A. Kozlova p. 376  abstract

Burnishing of Holes with the Application of a Soft-Metal Antifrictional Coating

V. M. Sorokin, S. S. Tanchuk, N. M. Tudakova, A. V. Mikheev and V. A. Zotova p. 379  abstract

Turret Head for Numerically Controlled Machine Tools with a Pneumatic Rotary Drive for the Tool Disk

B. E. Pini, Yu. V. Maksimov and A. V. Popov p. 383  abstract

Automated Design of Machine-Tool Attachments

K. S. Kul’ga and A. V. Polovinkin p. 386  abstract

New Roughing Method for External Surfaces of Revolution of Hard-to-Machine Workpieces

A. D. Maksimov and A. K. Firsov p. 392  abstract

Analysis of the Forces in the Combined Cutting and Deforming of Non-Rigid Shafts with Tangential Oscillations

Yu. V. Maksimov, A. V. Ankin and A. I. Chebyshev p. 394  abstract

Simulation of Multicutter Milling with Tool Vibration

Yu. V. Maksimov and D. L. Kuz’minskii p. 397  abstract

Producing Cylindrical Gears by High-Speed Grinding

A. S. Kalashnikov, Yu. A. Morgunov and P. A. Kalashnikov p. 400  abstract

Hardening Curves for Materials with Strain Hardening

L. D. Olenin and M. A. Lekveishvili p. 404  abstract

Resultant Cycloid Trajectory in Plane Finishing

K. R. Muratov and E. A. Gashev p. 407  abstract

Spark Plasma Sintering of Cutting Plates

D. I. Yushin, A. V. Smirnov, N. Solis Pinargote, P. Yu. Peretyagin, V. A. Kuznetsov and R. Torrecillas p. 410  abstract

Flash Formation in the Pulsed Laser Cutting of Thin-Walled Workpieces

S. A. Kochergin, Yu. A. Morgunov and B. P. Saushkin p. 414  abstract

Solving Parametric Assembly Problems

M. N. Sorokin and I. I. Koltunov p. 417  abstract