Contents

Russian Engineering Research


Vol. 37, No. 4, 2017

A simultaneous English language translation of this journal is available from Pleiades Publishing, Ltd.
Distributed worldwide by Springer. Russian Engineering Research ISSN 1068-798X.


Damping of Vibrations at Resonant Frequencies of Electrical Systems

R. M. Aibinder, B. A. Gordeev, S. N. Okhulkov, A. N. Osmekhin and A. S. Plekhov p. 279  abstract

Sliding Thrust Bearings in a Centrifugal Compressor with a Semiclosed Impeller

N. V. Sokolov, T. V. Maksimov, M. B. Khadiev and V. A. Futin p. 287  abstract

Thermal Characteristics of Spindles on Rolling Bearings

I. A. Zverev and A. R. Maslov p. 292  abstract

Accelerated Endurance Tests of K-H-V Planetary Gears at Low Speed

V. N. Razhikov and A. N. Belyaev p. 296  abstract

Selecting the Best Ultralow-Power Turbine at the Conceptual-Design Stage

D. S. Kalabukhov and A. A. Martynov p. 300  abstract

Drive System for Vehicles

S. A. Voinash p. 310  abstract

Influence of the Microstructure of Al–Si Alloy on the Surface-Layer Quality in Microarc Oxidation

S. K. Kiseleva, L. I. Zainullina, M. M. Abramova, A. A. Khazgalieva, N. Yu. Dudareva and I. V. Aleksandrov p. 314  abstract

Dampers and Shock Absorbers Based on Multilayer Elastic Shells

V. I. Pyndak, A. E. Novikov, A. V. Dyashkin and E. M. Shevketov p. 318  abstract

Gas-Dynamic Coatings

V. E. Arkhipov, A. F. Londarskii, G. V. Moskvitin, M. S. Pugachev and N. V. Shirokova p. 321  abstract

Reliability of Centrifugal–Rotational Finishing by Steel Shot

M. A. Tamarkin, E. E. Tishchenko, D. V. Kazakov and A. G. Isaev p. 326  abstract

Energy-Efficient Press for Oil-Bearing Crops

V. N. Vasilenko, L. N. Frolova, N. A. Mikhailova, K. Yu. Rusina and D. A. Tarkaeva p. 330  abstract

Informational Model of Digital Manufacturing (ISA-95 Standard)

Yu. S. Balashova, S. G. Zarubin and I. V. Rybalov p. 332  abstract

Structural Synthesis of Machine-Tool Configurations

M. Yu. Lekhmus, S. I. Fetsak and R. F. Amirov p. 335  abstract

Influence of Manufacturing Errors in a Metal-Cutting Machine with Parallel Kinematic Structure on Its Machining Precision

B. A. Enikeev, A. I. Nigmatullin, O. K. Akmaev and R. G. Kudoyarov p. 338  abstract

Geometric Errors of Numerically Controlled Milling Machines

R. M. Khusainov, R. M. Khisamutdinov, S. Yu. Yurasov, S. A. Belov, O. V. Goryacheva, V. A. Grechishnikov, A. V. Isaev and V. B. Romanov p. 344  abstract

Improving the Performance of Composite Bits with Replaceable Inserts

E. V. Artamonov, M. O. Chernyshov and T. E. Pomigalova p. 348  abstract

Selecting Optimal Cutting Tools for Lathes

R. M. Khusainov, A. N. Golovko, S. M. Petrov, S. Yu. Yurasov, I. P. Balabanov, V. A. Grechishnikov, V. B. Romanov and P. M. Pivkin p. 351  abstract

Slow-Neutron Detector Based on Thin CVD Diamond Film

S. A. Afanas’ev, A. P. Bol’shakov, V. A. Dravin, K. N. Zyablyuk, V. A. Kolyubin, P. G. Nedosekin, V. N. Pashentsev, V. G. Ral’chenko, E. M. Tyurin and R. A. Khmel’nitskii p. 354  abstract

Applying Solid Lubricant to the Grinding-Wheel Surface

V. A. Panaioti p. 359  abstract

Preparations for Production in Unigraphics NX Software

R. M. Khusainov, S. Yu. Yurasov and R. R. Kazargel’dinov p. 363  abstract

Cross Section of the Cut Layer in Oblique Single-Edge Boring by a Radial Cutter

A. V. Filippov, N. N. Shamarin, O. A. Podgornykh and P. A. Chazov p. 367  abstract

Sound-Absorbing Polyurethane Foam for the Auto Industry

L. N. Shafigullin, S. Yu. Yurasov, G. R. Shayakhmetova, A. N. Shafigullina and E. D. Zharin p. 372  abstract