Contents
Russian Engineering Research

Vol. 36, No. 4, 2016

A simultaneous English language translation of this journal is available from Allerton Press, Inc.
Distributed worldwide by Springer. Russian Engineering Research ISSN 1068-798X.

Dynamic Hardening of Structural Polyurethanes

S. N. Yakovlev p. 255  abstract

Shaping of Discrete Abrasive Segments for Plane Face Grinding

V. G. Gusev, A. V. Morozov, and P. S. Shvagirev p. 258  abstract

Neural-Network Simulation of Diesel Operation under a Nonsteady Load

E. V. Zubkov and A. Kh. Khairullin p. 262  abstract

Nonuniform Delivery Rates from Multicylinder Pumps

V. E. Shcherba, A. P. Bolshtyanskii, S. Yu. Kaigorodov, and D. A. Kuzeeva p. 266  abstract

Dynamics of an Indirect Hydraulic Pressure Regulator with an Elastic Element

V. V. Syrkin and V. A. Treier p. 270  abstract

Contact Rigidity of Parts with Similar Hardness

M. M. Matlin, E. N. Kazankina, and V. A. Kazankin p. 273  abstract

Photometric Determination of the Dimensions of a Standard Object with Basing Errors

V. A. Saninskii, M. P. Gorsheneva, D. V. Potekhin, and A. A. Silaev p. 277  abstract

Friction in the Annular Gaps between the Control Rods and Housing of the BREST Reactor

A. V. Beznosov, T. A. Bokova, K. A. Makhov, A. I. Shumilkov,
A. Yu. Albagachiev, and Yu. N. Drozdov p. 279  abstract

Frictional Basalt-Reinforced Polymers Based on Polytetrafluoroethylene

A. A. Okhlopkova, S. V. Vasil’ev, P. N. Petrova, and O. V. Gogoleva p. 285  abstract

Structural Failure at Low Temperatures and Stability Diagnostics

Yu. G. Kabaldin, I. L. Laptev, D. A. Shatagina, M. S. Anosova, and V. O. Zotova p. 289  abstract

Determining the Stability Regions in End Milling

A. Ya. Krasil’nikov and K. Yu. Kravchenko p. 294  abstract

CAD/CAE Modeling of Maltese Cross Mechanisms in Machine Tools

A. N. Sobolev and A. Ya. Nekrasov p. 300  abstract

CAD/CAE Systems in the Design of Numerically Controlled Multipurpose Machine Tools

K. S. Kul’ga, P. V. Vinogradov, and A. A. Gaitova p. 303  abstract

Nondestructive Assessment of the Cutting Properties of Wheels
with a Single-Layer Diamond–Galvanic Coating

Yu. E. Petukhov, P. V. Domnin, and A. A. Rubets p. 309  abstract

Measuring Instruments for Shafts

D. A. Loktev, S. B. Egorov, A. V. Kapitanov, V. G. Mitrofanov, and T. P. Egorova p. 312  abstract

Indicators for Linear Measurements

P. P. Voronichev and M. I. Etingof p. 318 abstract

Influence of Rigid and Frictional Kinematic Linkages in Tool–Workpiece Contact
on the Uniformity of Tool Wear

K. R. Muratov p. 321  abstract

Influence of Tool Wear on the Heat-Flux Distribution and Temperature at the Contact Surfaces
in the End Milling of OT4 Titanium Alloy

D. V. Evdokimov, D. L. Skuratov, and D. G. Fedorov p. 324  abstract

Improving the Precision of Mechatronic Robot Drives

Yu. V. Ilyukhin and Yu. V. Poduraev p. 328  abstract

Producing Thin-Walled BrA9 Bronze Components by Selective Laser Melting

I. V. Shishkovskii, V. A. Safronov, and K. E. Protasov p. 335 abstract

Pleiades Publishing home page | journal home page | top

If you have any problems with this server, contact webmaster.