Contents
Russian Engineering Research

Vol. 35, No. 4, 2015

A simultaneous English language translation of this journal is available from Allerton Press, Inc.
Distributed worldwide by Springer. Russian Engineering Research ISSN 1068-798X.

Critical Forces in Longitudinal Beam Flexure

M. Ya. Brovman p. 231  abstract

Error in Calculating the Extension of a Plate with a Circular Notch

S. V. Doronin and A. N. Rogalev p. 235  abstract

Determining the Logarithmic Decrements in Resonant Tests of Structures

Yu. Ya. Betkovskii p. 239  abstract

Design of Vibrationally Stable Equipment for a Guide Unit

V. V. Erokhin p. 247  abstract

Wear of a Laser-Surfaced Steel Shaft and a Slip-Bearing Bush

V. P. Biryukov p. 249  abstract

Improving Worm-Gear Performance by Optimal Lubricant Selection in Accelerated Tests

S. A. Polyakov, S. Yu. Goncharov, M. N. Zakharov, and V. V. Lychagin p. 253  abstract

Surface Precision and Roughness of Deep Holes Produced by Small-Diameter Gun Drills

S. V. Kirsanov and A. S. Babaev p. 256  abstract

Producing Al–3d Composites from Powder Mixtures by Means
of High-Frequency Induction Plasma

V. A. Surkov p. 260  abstract

Shaping of Spherical Surfaces on Centerless Superfinishing Machines
with Longitudinal Supply

O. V. Zakharov, A. F. Balaev, and A. P. Bochkarev p. 264  abstract

Inheritance of Carbide-Particle Dimensions in Explosive Surfacing with Hard-Alloy Powder

A. V. Krokhalev, V. O. Kharlamov, O. A. Avdeyuk, K. V. Prikhod’kov, A. N. Savkin,
S. V. Kuz’min, V. I. Lysak, and M. A. Tupitsin p. 267  abstract

Rotary Drawing of Axisymmetric Shells with Distribution of the Deformation Zone

S. S. Yakovlev, V. I. Tregubov, O. V. Pilipenko, and K. S. Remnev p. 270  abstract

Finite-Element Solution of Contact Problems in Elasticity Theory

N. L. Marina p. 277  abstract

Redistribution of Hydrogen in Steel on Machining

Yu. N. Polyanchikov, N. I. Egorov, O. A. Kursin, M. Yu. Polyanchikova, and V. N. Egorova p. 282  abstract

Mathematical Model of Thread-Cutting Taps with the Use of Relation Operators

I. S. Boldyrev p. 285  abstract

Disk Tool for Machining Helical Surfaces

N. V. Kolesov, P. V. Domnin, and S. S. Zav’yalov p. 290  abstract

Design of Controllable End Mills with Superhard Cutters for High-Speed Machining

V. A. Grechishnikov, I. V. Chulin, and A. I. Isakov p.292  abstract

Tool Wear in Turning Stainless-Steel Blanks

V. G. Gusev and D. A. Chemezov p. 295  abstract

Influence of the Cutting Speed on Chip Formation in Turning High-Temperature Chromium
and Nickel Alloys

A. M. Adaskin, V. N. Butrim, A. A. Vereshchaka, A. S. Vereshchaka, and V. V. Kashirtsev p. 298  abstract

Predicting the Working Life of Abrasive Grains

D. V. Ardashev p. 302  abstract

Group Abrasive Machining in Flexible Production

D. V. Ardashev p. 305  abstract

Distance between Passes for Isometric Milling

P. M. Nikolaev p. 307  abstract

Cutting and Deformation of Shafts in Technological-Fluid Jets

V. M. Sorokin, S. S. Tanchuk, N. M. Tudakova, A. V. Mikheev,
V. A. Zotova, and V. V. Berglezov p. 309  abstract

Design of Active Monitoring Systems for the Mean Thread Diameter in Thread Grinding

V. I. Leun and E. V. Nikolaeva p.313  abstract

Pleiades Publishing home page | journal home page | top

If you have any problems with this server, contact webmaster.