Contents
Russian Engineering Research

Vol. 31, No. 4, 2011

A simultaneous English language translation of this journal is available from Allerton Press, Inc.
Distributed worldwide by Springer. Russian Engineering Research ISSN 1068-798X.

Rotary Oscillation of Symmetric Body

S. A. Gerasimov p. 299  abstract

Surface Layer of Quartz-Based Wear-Resistant Structural Ceramic after Machining

V. A. Rogov and M. I. Shkarupa p. 302  abstract

Calculating the Wear Resistance of Metals in Frictional Pairs
5. Determining the Functional Parameters of Locomotive Wheel Pairs

A. M. Ryakhovskii p. 307  abstract

Sensitivity of Structural Materials to Stress Concentration in Multicyclic Fatigue

M. N. Stepnov and A. S. Naumkin p. 315  abstract

Static Characteristics of Multimotor Electrohydraulic Drives in Control Systems

Yu. A. Medvedev and V. P. Kuznetsov^† p. 320  abstract

Hydraulic Analogs of the Obliterative Atherosclerosis of Blood Vessels

A. V. Vanchikov and V. Ts. Vanchikov p. 331  abstract

Influence of the Geometric Properties of an External Housing on Its Stress–Strain State

O. V. Sharkov and I. A. Zolotov p. 335  abstract

Depth of the Shot-Hardened Surface Layer on Machine Parts

I. G. Shin and R. Kh. Maksudov p. 338  abstract

Frictional Mutation

I. A. Medelyaev p. 342  abstract

Physicochemical Phenomena in the Lubricant of the Cylinder–Piston Group
of a Compressor with Corrosive Mechanical Wear

A. P. Perekrestov p. 347  abstract

Thermal Behavior of Components in Metal-Cutting Machines

A. P. Kuznetsov p. 351  abstract

Cutting Complex Blanks from Anisotropic Materials

E. M. Baranova, A. N. Baranov, and L. A. Bulatov p. 358  abstract

Influence of the Hole in the Blank on the Quality and Precision
of the Hole Obtained by Broaching

A. A. Bekaev, V. A. Mikhailov, and D. L. Kuz’minskii p. 362  abstract

Improvement in Hybrid Drawing by a Tool with Regular Microgeometry
on the Basis of Metal-Coating Additives

A. V. Shchedrin, A. A. Bekaev, D. N. Garkunov, E. A. Mel’nikov, and V. S. Gavrilyuk p. 365  abstract

Development of a New Theory of Thermal Cutting Processes
16. Determining the Temperature Fields and Contact Temperatures in Cutting (Part 2)

A. L. Vorontsov, N. M. Sultan-Zade, A. Yu. Albagachiev, and A. I. Savkin p. 369  abstract

Test System for Counterblow Hammer with Hydraulic Coupling

Yu. V. Kolotov p. 376  abstract

Effectiveness in Regulating the Dimensional Precision of Machine Parts by Adjustment

V. V. Martynov p.378  abstract

Stress–Strain State of Cutting-Plate Supports

V. A. Rogov, A. S. Koshelenko, and A. N. Popikov p. 383  abstract

Algorithm for Calculating the Optimal Geometric-Stabilization Time of Cutting Tools

A. I. Barbot’ko, V. I. Dmitriev, and A. I. Zhilenkov p. 387  abstract

Classification of Tool Structure

P. V. Pukhal’skii and V. A. Pukhal’skii p. 389  abstract

Manufacturing Abrasive Tools without Binder for Repair and Machine Shops

A. A. Emel’yanenko, D. V. Moiseeva, Yu. N. Polyanchikov, and O. A. Kursin p. 391  abstract

Influence of Basing Errors in the Blank on the Measurement Precision

F. N. Abramov p. 393  abstract

Geometric Analysis of Drive-Mechanism Components

B. M. Iznairov, O. B. Iznairov, and A. N. Vasin p. 403  abstract

Influence of the Amplitude and Phase Spectra of Shape Fluctuations in Surfaces
of Revolution on the Basing Error

A. A. Zyuzin, I. S. Konstantinova, B. N. Kaz’min, and M. D. Yurov p. 409  abstract

Assessment of Grinding-Wheel Life in Terms of Machined-Surface Quality

S. G. Bishutin and N. V. Tyul’pinova p. 413  abstract

Waste-Free Ultrasonic Bearing Assembly

A. V. Korolev, A. A. Korolev, V. V. Bolkunov, and A. N. Vasin p.415  abstract

Pleiades Publishing home page | journal home page | top

If you have any problems with this server, contact webmaster.