Contents
Russian Engineering Research

Vol. 29, No. 3, 2009

Simultaneous English language translation of the journal is available from Allerton Press, Inc.
Distributed worldwide by Springer. Russian Engineering Research ISSN 1068-798X.

Gap Variation in a Brake Mechanism with an Automatically Controlled Crank

Yu. A. Golubev p. 225  abstract

Superhigh-Vacuum Linear Asynchronous Motor with Rolling Rotor
and Magnetic-Flux Concentrators

V. I. Polevskii and A. V. Sapsalev p. 230  abstract

Hydrodynamic Supporting Bearings with Initially Plane-Parallel Slip Surfaces

V. A. Maksimov, A. V. Paladii, T. V. Maksimov, and E. A. Novikov p. 234  abstract

Synthesis of Rational Tooth Profiles for Plane Gear Transmissions

An I-Kan p. 240  abstract

Improving Automatic V-Belt Variation Systems

A. V. Spiridonov and G. K. Ryabov p. 243  abstract

Self-Compensation of High-Temperature Pipelines with Elastic Attachment

A. A. Pshenitsyn p. 246  abstract

Control of the Liquid Boundary Layer in Slide-Valve Converters and
in Laminar Chokes of Hydraulic Drives

I. V. Kholmogorov, G. K. Khomyakov, and V. Ts. Vanchikov p. 249  abstract

Proposed Designs for a Cylindrical–Conical–Cylindrical Motor–Transmission System

A. S. Ivanov, I. A. Vorob’ev, and M. M. Ermolaev p. 251  abstract

Slip-Bearing Operation in Dense Liquid-Metal Coolants at Nuclear Power Plants

A. V. Beznosov, M. A. Antonenkov, P. A. Bokov, and O. O. Novozhilova p. 253  abstract

Centrifugal Shaping of Polymer Composites

S. V. Goncharov, V. A. Ivanov, and S. P. Zakharychev p. 259  abstract

Stress Fields in the Surface Layer of Composites with Spherical Reinforcing Grains on Cutting

I. A. Semenov and G. A. Rastorguev p. 264  abstract

Matrix Models of the Accuracy in Multitool Two-Support Setup

N. D. Yusubov p. 268  abstract

Stability of Plane Equilibrium of Mills in Nonuniform Heating

A. Yu. Karpachev p. 272  abstract

Model of Cutting-Tool Wear Based on the Analysis of Oxidative Frictional Processes

M. Yu. Kulikov, S. L. Levakov, A. Yu. Kartamyshev, and A. V. Pautov p. 276  abstract

Economic Benefits of Lubricant Supply to the Cutting Zone

Yu. A. Mikiporis p. 281  abstract

Upsetting of Low-Plasticity Materials within Plastic Casings

A. L. Vorontsov p. 283  abstract

New Rotary Pump

S. A. Kuznetsov p. 289  abstract

Kinematic Structure of Gear-Cutting Machine Tools Based on a Hydraulic Step Drive for the Production of
Noncircular Gears

V. A. Vanin and A. N. Kolodin p. 291  abstract

Smart Control System for Machine Tools

A. K. Tugengol’d, E. A. Luk’yanov, E. A. Remizov, and D. A. Nosenkov p. 298  abstract

Model for Regulating the Shaping Precision of Helicoid Surfaces in the Design
of Machine-Tool Systems

V. M. Makarov p. 302  abstract

Stress–Strain State of Hard-Alloy Plates

V. I. Amedie, V. N. Ivanov, G. G. Poznyak, and I. A. Semenov p. 307  abstract

New Single-Component Abrasive Tool

Yu. N. Polyanchikov, A. L. Plotnikov, M. Yu. Polyanchikova, A. I. Kurchenko,
and O. A. Kursin p. 310  abstract

Industrial Operation of a Monitoring Instrument in a Multipurpose Machine Tool

G. M. Trompet, V. A. Fedotov, and I. A. Kolka p. 311  abstract

Machining Parts Made from Diverse Materials by Means of a Composite Tool

E. A. Kudryashov and A. M. Nikonov p. 313  abstract

Selecting the Initial Cutting Parameters in Machining Magnesium Alloys

B. D. Danilenko p. 316  abstract

Paired Tooth Cutting of Cylindrical Gears

Yu. N. Fedorov, V. D. Artamonov, and O. L. Zolotukhina p. 319  abstract

LTA Laser Turning Method

A. Ya. Alifanov p. 322  abstract

Pleiades Publishing home page | journal home page | top

If you have any problems with this server, contact webmaster.