Contents

Russian Engineering Research

---

Vol. 46, No. 3, 2026

---

Motion of a Magnetic Robot on an Irregular Ferromagnetic Surface

S. I. Koryagin, O. V. Sharkov, and N. L. Velikanov p. 303  abstract

Statistical Methods of Maximizing the Accuracy of Empirical Models

N. A. Ragrin and D. M. Kurganova p. 307  abstract

Spark Discharges in Pulsed Plasma Ignition Systems

F. A. Gizatullin and N. K. Potapchuk p. 315  abstract

Improving the Productivity of Rapid Descent Chutes: Experimental Determination of the Longitudinal Profile

Ya. L. Liberman and L. N. Gorbunova p. 320  abstract

A Study of the Temperature Mode of the Driveshaft of the Rear Axle Drive of an Automobile with a 6 × 4 Arrangement Wheel

A. G. Pastukhov, E. P. Timashov, and V. I. Vergun p. 324  abstract

Stability of Vibrational Processes in Machining Mud Pump Components

R. Yu. Nekrasov p. 329  abstract

Features Special Dimensional Chains for Rational Design

N. M. Rasulov, U. M. Nadirov, and I. A. Abbasova p. 333  abstract

Accuracy Evaluation for Grip Performance of an Anthropomorphic Bionic Hand

V. F. Bez”yazychnyi, A. V. Yudin, V. V. Mikhailov, E. A. Eliseichev, M. V. Pankratov, P. S. Vorobyev, and I. S. Blinov p. 337  abstract

Static Thermoelastic Stresses in a Curvilinear Cylindrical Layer

M. E. Solov’ev, S. S. Kokarev, S. L. Baldaev, L. Kh. Baldaev, and Yu. N. Shuleva p. 345  abstract

Assessing the Residual Stress from the Hardness of the Surface Layer after Reverse Burnishing

Huu Hai Nguyen and S. A. Zaides p. 353  abstract

Producing High-Entropy Alloy Targets for Coating Application by Ion Plasma Sputtering

I. V. Kolesnikov, A. P. Sychev, and E. S. Novikov p. 361  abstract

Mathematical Modeling of the Process of Electric-Spark Machining of Titanium Blades of Steam Turbines

I. V. Vornacheva, A. O. Tancura, S. A. Voinash, R. R. Zagidullin, and V. N. Malikov p. 365  abstract

Study of Processes in the Surface Layer of the Machined Material during Combined Hole Mandrelling

A. V. Shchedrin, A. A. Bekaev, and N. Yu. Chikhacheva p. 373  abstract

Efficiency Calculation of the Waterjet Cutting of Die Cutters

S. Simon, N. D. Yusubov, S. F. Amirli, and F. G. Amirov p. 379  abstract

Advantages of Organizing Maintenance Service of Machines by the Manufacturer

I. N. Omelchenko and S. L. Kushnarev p. 383  abstract

Tool Setup for Multiaxial CNC Machines: Determining the Chip Channel Geometry from the Grinding Wheel Position, Taking Account of Wear

V. A. Grechishnikov, A. A. Ershov, E. S. Nazarenko, A. M. Yazev, A. P. Malakhinskii, I. V. Minin, M. Yu. Prus, T. B. Tyurbeeva, and A. B. Nadykto p. 390  abstract

Combined Numerical Geometric and Physical Modeling of CNC Machining

E. I. Shchurova p. 395  abstract

Application of Neural Network Methods for Quality Control of Mechanical Engineering Products during Their Selective Laser Melting

P. Yu. Peretyagin, N. V. Khodanovich, P. A. Podrabinnik, G. G. Aslanyan, and N. S. Grigoriev p. 400  abstract

Laser Cladding of Wear-Resistant Coatings to Improve the Operational Reliability of Parts Operating in Aggressive Environments

P. Yu. Peretyagin, S. R. Shekhtman, N. A. Sukhova, P. A. Naumenko, A. A. Mozhaev, and S. N. Grigoriev p. 406  abstract

Mathematical Tools for Determining the Cost of the Production Process of a High-Tech Product

E. R. Zhdanov, O. S. Kharina, and E. Yu. Kozlov p. 412  abstract

Influence of Hot Isostatic Pressing, with or without Subsequent Heat Treatment, on the Structure of 3D-Printed Heat-Resistant Nickel Alloy

T. V. Ol’shanskaya and I. A. Mosyagin p. 420  abstract

Neural Network Recognition of Noncanonical Machine Components

E. N. Sosenushkin, E. A. Yanovskaya, A. S. Zhelnov, and G. D. Volkova p. 424  abstract

On One Exact Solution of the Boundary Value Problem of the Contact Interaction of a Settling Plastic Layer with Elastic Bodies

V. A. Kadymov, E. A. Yanovskaya, and E. B. Frolov p. 429  abstract

Nonlinear Surface Electromagnetic Waves in Multilayer Dielectric Media and Their Propagation Stability in Technological Systems

E. M. Krasikova, L. A. Uvarova, M. Yu. Prus, O. E. Yaremko, and A. B. Nadykto p. 433  abstract

Modeling the Thermal Deformation of Nanotubes

A. V. Babynina, L. A. Uvarova, and N. N. Kholshchevnikova p. 438  abstract

Simulation as a Development Management Tool for Industrial Enterprises

N. S. Efimova, A. A. Yakovlev, E. A. Lapushkina, and E. S. Burdina p. 443  abstract

Key Trends in the Development of Industrial Enterprises during the Digital Transformation

N. S. Efimova, E. V. Surkova, A. M. Kambarov, and I. V. Kleev p. 446  abstract

---