Vol. 43, No. 3, 2023

Russian Engineering Research

Hole Accuracy in Reaming

G. S. Zheleznov and A. V. Shirokov p. 223 abstract

Floating Coastal Wave Power Generator: Analysis by Computational Fluid Dynamics

M. V. Zhelonkin, A. B. Loskutov, A. S. Plekhov and D. A. Malyarov p. 226 abstract

Conical Elastic Shell of Hydraulic Vibrational Support

A. I. Ermolaev, B. A. Gordeev, S. N. Okhulkov, A. S. Plekhov and D. Yu. Titov p. 233 abstract

Energy-Absorbing Chair with Reversible Adaptation

S. N. Sayapin p. 240 abstract

Monitoring Transmission Components by Digital Thermal Diagnostics

A. G. Pastukhov and E. P. Timashov p. 246 abstract

Thermal State of Cryogenic Fuel System in Civil Aircraft with Different Flight Patterns

A. G. Bratukhin, D. Y. Strelets, L. S. Yanovskiy, V. V. Raznoshchikov and A. M. Stol’nikov p. 251 abstract

Modernizing Machines to Extend Their Life

I. G. Golubev, N. S. Sevryugina, A. S. Apatenko and A. Yu. Fomin p. 258 abstract

Influence of the Lubricant’s Supply Temperature on the Operation of a Fluid Film Thrust Bearing

N. V. Sokolov, M. B. Khadiev, P. E. Fedotov and E. M. Fedotov p. 264 abstract

Tribological Self-Organization in the Hybrid Hole Burnishing of Aluminum Alloy Workpieces

N. Yu. Chikhacheva, A. V. Shchedrin, A. A. Bekaev, I. B. Degtyareva and T. A. Burlakova p. 272 abstract

Corrugation of the Inner Surface of a Cylindrical Shell by Local Plastic Deformation

V. D. Kukhar’, V. A. Korotkov, S. S. Yakovlev and A. A. Shishkina p. 278 abstract

Electrical-Pulse Deposition of Metal Nanoparticles from Liquid on a Solid Surface

V. V. Sleptsov, D. Yu. Kukushkin, R. A. Tsyrkov, V. V. Osipov, V. I. Kuz’kin and E. A. Trunova p. 281 abstract

Stamping of Nonuniform Channels. 7. Kinematic and Stress State of the Workpiece in Constrained Extrusion. 7.1. Plastic Region under Thick Wall

A. L. Vorontsov p. 285 abstract

Determination of Residual Stresses in Thin Hard Coatings of Topocomposites by Microindentation

N. A. Voronin p. 291 abstract

Strength of Lifting Devices in a Tower Dryer for Fire Hoses

P. V. Puchkov and V. E. Ivanov p. 297 abstract

Hybrid Finishing of Cylindrical Gears: Analysis by Physical Modeling

A. A. Malikov, A. N. Sidorkin, S. A. Vasin and Yu. V. Kovalev p. 299 abstract

Stability Analysis of Metal-Cutting Control System by the Mikhailov Criterion

V. P. Lapshin and I. A. Turkin p. 305 abstract

Control of Metal Transfer in Additive Shaping of Workpieces: Layer-by-Layer Application of Metal Layers by Plasma Spraying

Yu. D. Shchitsyn, D. S. Belinin, S. D. Neulybin, K. P. Karunakaran, A. V. Kazantsev and S. G. Nikulina p. 312 abstract

One-Dimensional Model of the Propulsion System Air Intake for a Supersonic Civil Aircraft

A. D. Alendar, V. G. Belova, A. S. Polev, V. A. Stepanov and M. V. Siluyanova p. 316 abstract

Influence of High-Temperature Annealing on the Structure and Microhardness of a Multilayer Composite Based on Nitrided Steel and Fe–Cr–V Alloy

T. V. Tokmakova and E. N. Tokmakova p. 322 abstract

Device for Determining Beam Characteristics in Electron-Beam Welding

G. L. Permyakov, D. N. Trushnikov, N. A. Musikhin, E. L. Krotova and Yu Sheng Fu p. 325 abstract

Predicting Alloy Strength by Neural Network Modeling: Al–Ca–Mn Alloys

L. A. Simonova, K. V. Klochkova and I. S. Bredinin p. 329 abstract

Low-Code and No-Code Technologies in Designing Digital Infrastructure for High-Tech Enterprises

R. S. Golov and A. V. Myl’nik p. 334 abstract

A Mechanism for Managerial Decision Making

N. K. Chaika p. 336 abstract

A Mechanism for Assessing Economic Activity

N. K. Chaika p. 339 abstract

Expanding the Capabilities of CNC Tool and Cutter Grinding Machines in the Manufacture and Resharpening of Cutting Tools by using CAD API

V. A. Grechishnikov, P. M. Pivkin, A. V. Isaev, A. A. Ershov, A. V. Isaev, V. A. Yashkov, A. S. Belotsky, I. V. Minin, V. V. Bushuev and A. B. Nadykto p. 342 abstract

Informational Model of Grinding Wheels with Indexable Segments Used for Machining Round Holes with Internal Helical Surfaces

V. A. Grechishnikov, V. A. Yashkov, P. M. Pivkin, V. A. Kuznetsov, E. V. Malysheva and A. B. Nadykto p. 346 abstract

Advanced Design and Machining of Three-flute Drills by Multi-axis Grinding, Laser Ablation and Electroerosion

P. M. Pivkin and A. A. Ershov p. 350 abstract

A New Method of Measuring the Edges of a Mill with a Shaped Cutting Surface

P. M. Pivkin, V. A. Grechishnikov, A. A. Ershov, A. A. Zelenskii and A. B. Nadykto p. 355 abstract

A Review of Analytical and Numerical Modeling of the Multi-axis Grinding of Helical Surfaces

V. A. Grechishnikov, Yu. E. Petukhov, P. M. Pivkin, A. A. Ershov, E. Yu. Malysheva, E. S. Nazarenko, A. B. Nadykto and K. M. Nazarenko p. 359 abstract

Fundamental Principles of the Formation of Surface Texture by Disk Mills Used High-Speed Multi-axis Machining

P. M. Pivkin, V. A. Grechishnikov, A. A. Ershov, V. A. Kuznetsov, D. V. Vygzhanin and L. A. Uvarova p. 364 abstract

Analysis of Relationships between Cutting Tool Properties, Machining Parameters and Product Quality in High Speed Multi-Axis Milling

V. A. Grechishnikov, P. M. Pivkin, Yu. E. Petukhov, A. V. Isaev, V. B. Romanov, A. S. Prikhod’ko, M. Yu. Prus and P. P. Aung p. 369 abstract

Grinding Special Stainless Steel Bearings

A. V. Golobokov, V. A. Kuznetsov, A. V. Smirnov and A. Yu. Prokop’ev p. 373 abstract

Cutting of Special Stainless Steel Thrust-Bearing Components

R. B. Volkov, V. A. Kuznetsov and A. Yu. Prokop’ev p. 376 abstract

A Computer-Aided Manufacturing System for the Production of Ceramic Cutting Inserts by Electrical Discharge Machining (EDM)

P. M. Pivkin, M. P. Kozochkin, V. A. Kuznetsov, A. A. Ershov, V. B. Romanov, A. P. Malakhinskii and A. B. Nadykto p. 379 abstract

Tools for Swiss-Type CNC Lathes

A. R. Maslov and E. M. Smolkin p. 383 abstract

Deformation of Flexible Parts in Robotic Assembly

E. A. Kogan, M. V. Vartanov and V. L. Nguyen p. 386 abstract

Contents

Russian Engineering Research