Contents

Russian Engineering Research

Vol. 42, No. 3, 2022

Calculating the Parameters of a Spring Compensator in a Piston Pump

K. R. Urazakov and D. D. Gorbunov p. 197  abstract

Longitudinal Tooth Modification to Improve the Load Capacity of Misaligned Gear Systems

F. G. Nakhatakyan p. 204  abstract

Predicting the Contact Strength and Load Capacity of Involute Gears

V. I. Korotkin, E. M. Kolosova and N. P. Onishkov p. 208  abstract

Improving the Performance of Cast-Iron Bushes in Small Marine Diesel Engines

N. K. Sanaev, A. Yu. Alimov and M. U. Akhmedpashaev p. 211  abstract

More Efficient Measurements of Surface Relief

S. I. Dos’ko, A. A. Molchanov, S. V. Bushuev and S. K. Rudnev p. 214  abstract

Effective Workspaces of Parallel Robots with Step Motors

M. N. Zakharov, M. S. Kuts, P. A. Laryushkin and K. G. Erastova p. 218  abstract

Metal–Polymer Frictional Contact in Reciprocating Motion

V. A. Kokhanovskii and N. V. Nikhotina p. 223  abstract

Assessing the Surface Contamination of Finned Pipes in Air-Cooling Systems

E. I. Shavaleev, A. A. Rukomoinikov, I. S. Khamitov and D. I. Dil’mukhametov p. 228  abstract

Profile Error and Surface Roughness in Electrochemical Micromachining

Yu. A. Morgunov, B. P. Saushkin and N. V. Khomyakova p. 232  abstract

Determining the Residual Stress and Strain in Large Polymer-Composite Airplane Components (Stringer Panels)

D. A. Bondarchuk, M. V. Klesareva, R. R. Gadelev and E. V. Nazarov p. 239  abstract

Physical Aspects of Low-Temperature Fatigue

Yu. G. Kabaldin, A. A. Khlybov, M. S. Anosov and A. V. Kiselev p. 244  abstract

Mobility Analysis of Foldable Mechanisms Using Screw Theory

A. S. Fomin and A. V. Antonov p. 250  abstract

Benefits of Diversification into Airfreight for Passenger Airlines

M. M. Gyazova and M. V. Siluyanova p. 255  abstract

Modernization of Tooth-Rounding Equipment in Gear Production

Z. S. Savinov, T. A. Makarova and I. I. Kozar’ p. 258  abstract

Two-Phase Cooling in Cutting Systems

D. Yu. Dubrov p. 262  abstract

Air-to-Air Heat Exchanger in a Turbofan Ramjet Engine

M. V. Siluyanova, D. N. Kuritsyn and A. N. Grunin p. 267  abstract

Components of the Drawing Forces in the Manufacture of Narrow Rectangular Pipe

S. I. Kozlov, V. I. Trifanov, O. A. Sukhanova, I. V. Trifanov and A. V. Sutyagin p. 270  abstract

Digital Design of Tool-Management Systems for Friction Stir Welding

D. N. Kuritsyn, V. V. Kuritsyna and M. V. Siluyanova p. 274  abstract

Neural Networks in Manufacturing

L. A. Simonova, E. I. Egorova and A. I. Akhmadiev p. 278  abstract

Management of Business Processes in Short-Run Production

Yu. G. Sledkov, L. L. Khoroshko and P. M. Kuznetsov p. 282  abstract

Improving Product Quality by APQP and PPAP

T. V. Tokmakova, V. I. Vysotskaya, E. N. Tokmakova and S. B. Malikov p. 286  abstract

Influence of Leasing on the Economics of Flight

A. G. Kuznetsov and N. K. Chaika p. 288  abstract

Management of Business Processes

E. V. Surkova and Yu. A. Mazhaiskii p. 292  abstract

Tools for Timely Response to Customers’ Quality Requirements in the Auto Industry

A. A. Malikov, V. N. Kozlovskii and S. A. Vasin p. 295  abstract

Digitization in Product Quality Management

A. A. Malikov, V. N. Kozlovskii and S. A. Vasin p. 301  abstract

Plotting Vehicle Trajectories in Assisted Parking

A. V. Tumasov, P. O. Beresnev, V. I. Filatov, D. Yu. Tyugin and A. V. Ulitin p. 306  abstract